相移阴影莫尔基于迭代LSM拟合

相移阴影莫尔技术相位高度存在着非线性关系,无法在全场获得均匀相移,因而致使经典的相移算法不能得到精确解.对此,提出了一种基于最小方差迭代的相移阴影莫尔技术,该技术通过垂直光栅面等间距移动光栅来产生相移,但光栅移动距离可不采用固定值,所以相移过程灵活;使用在高度解调过程中确定的逐点相移增量来抽取精确的测量相位,实现了相移...     

Low temperature testing and neutron irradiation of a swept charge device on board the HXMT satellite

We present the low temperature testing of an SCD detector, investigating its performance such as readout noise, energy resolution at 5.9 keV and dark current. The SCD's performance is closely related to temperature, and the temperature range of -80 ℃ to -50 ℃ is the best choice, where the FWHM at 5.9 keV is about 130 eV. The influence of the neutron irradiation from an electrostatic accelerator with fluence up to 1×10⁹ cm^-2 has been examined. We find the SCD is not vulnerable to neutron irradiation. The detailed operations of the SCD and the test results of low temperature are reported, and the results of neutron irradiation are discussed.     

相移阴影莫尔基于迭代LSM拟合

相移阴影莫尔技术相位高度存在着非线性关系,无法在全场获得均匀相移,因而致使经典的相移算法不能得到精确解.对此,提出了一种基于最小方差迭代的相移阴影莫尔技术,该技术通过垂直光栅面等间距移动光栅来产生相移,但光栅移动距离可不采用固定值,所以相移过程灵活|使用在高度解调过程中确定的逐点相移增量来抽取精确的测量相位,实现了相移阴影莫尔技术中固有的相位高度非线性误差补偿.结果表明,该方法可通过干涉图计算光栅的移动量,具有相移器的自标定特性.     

频脉冲沉积微晶Ni-20Cr-Y_2O_3ODS合金涂层

采用高频电脉冲沉积技术在1Cr18Ni9Ti不锈钢表面上沉积了含弥散Y2O3氧化物的纳米级MGH754 ODS合金微晶涂层, 涂层与基体具有冶金结合. 在1 000℃静态空气中100 h恒温氧化实验结果表明：微晶化和添加弥散氧化物促进了涂层中的铬选择氧化形成Cr2O3, 并提高了表面氧化膜的黏附性, 改善了不锈钢抗高温氧化性能.     

柔性电子封装结构中夹杂对延展性的影响分析

以岛-桥型柔性电子封装结构为研究对象,从封装材料中夹杂的刚度、位置、封装方式三个方面探讨了夹杂对柔性电子结构延展性的影响。有限元分析结果表明:随着夹杂刚度的增大,桥的最大主应变增大,整体结构最大延伸量可减小30%;夹杂埋藏位置越深,桥顶局部的整体应变水平越大,最大延伸量可减小20%;相对"硬"封装情形,相同的夹杂对"软"封装中桥的最大延伸量的影响更严重。本文所得结论对于柔性电子器件结构的设计和材料选用具有参考和指导意义。     

火焰热解喷涂Al2O3—Y2O3陶瓷涂层

采用火焰热解喷涂方法，以Ａｌ（ＮＯ３）３和Ｙ（ＮＯ３）３为源物质，在敞开的大气环境中，在不锈钢基板上获得了具有一定厚度的Ａｌ２Ｏ３Ｙ２Ｏ３复合氧化物陶瓷涂层。在１２７３Ｋ空气中的恒温氧化结果表明，涂层有效地促进了基体中铬元素的选择氧化，并提高了不锈钢的抗高温氧化性能。     

高频脉冲沉积微晶Ni-20Cr-Y2O3ODS合金涂层

采用高频电脉冲沉积技术在1Cr18Ni9Ti不锈钢表面上沉积了含弥散Y2O3氧化物的纳米级MGH754 ODS合金微晶涂层, 涂层与基体具有冶金结合. 在1 000℃静态空气中100 h恒温氧化实验结果表明:微晶化和添加弥散氧化物促进了涂层中的铬选择氧化形成Cr2O3, 并提高了表面氧化膜的黏附性, 改善了不锈钢抗高温氧化性能.     

Design and implementation of the NaI(Tl)/CsI(Na) detectors output signal generator

We designed and implemented a signal generator that can simulate the output of the NaI(Tl)/CsI(Na)detectors’pre-amplifier onboard the Hard X-ray Modulation Telescope(HXMT).Using the development of the FPGA(Field Programmable Gate Array)with VHDL language and adding a random constituent,we have finally produced the double exponential random pulse signal generator.The statistical distribution of the signal amplitude is programmable.The occurrence time intervals of the adjacent signals contain negative exponential distribution statistically.     

Proton irradiation effect on SCDs

The Low Energy X-ray Telescope is one of the main payloads on the Hard X-ray Modulation Telescope satellite.Swept charge devices(SCDs)are selected as detectors for the Low Energy X-ray Telescope.As SCDs are sensitive to proton irradiation,irradiation tests were carried out on the HI-13 accelerator at the China Institute of Atomic Energy.The beam energy was measured to be 10 MeV at the SCD.The proton fluence delivered to the SCD was 3×108protons/cm2over two hours.By comparing the performance before and after irradiation,it is concluded that proton irradiation affects both the dark current and the charge transfer inefficiency of the SCD.The energy resolution of the proton-irradiated SCD is 212 eV@5.9 keV at-60?C,while it before irradiated is 134 eV.Moreover,better performance can be reached by lowering the operating temperature of the SCD in orbit.