Semi-quantitative study on the Staebler-Wronski effect of hydrogenated amorphous silicon films prepared with HW-ECR-CVD system

The method of numerical simulation is used to fit the relationship between the photoconductivity in films and the illumination time. The generation and process rule of kinds of different charged defect states during illumination are revealed. It is found surprisingly that the initial photoconductivity determines directly the total account of photoconductivity degradation of sample.     

高质量宽带隙立方氮化硼薄膜的研究进展

文章着重介绍了最近研制出的高质量宽带隙立方氮化硼薄膜的三种制备方法和结构特性 :(1)用射频溅射法在Si衬底上制备出立方相含量在 90 %以上 ,Eg>6 .0eV的c-BN薄膜 ;(2 )用离子束辅助的化学气相沉积法(CVD) ,在金刚石上外延生长出立方含量达 10 0 %的单晶c -BN薄膜 ;(3)用微波电子回旋共振CVD法 (MW -ECR-CVD)在金刚石上外延生长出高纯c-BN薄膜 .这些高纯c -BN薄膜 ,可应用于制作各种半导体 (主要是高温、高频大功率 )电子器件 .     

用H-W-ECR CVD系统实现氢化非晶硅薄膜在氢气环境下同时进行化学热退火和光诱导退火的研究

为了研究氢化非晶硅薄膜的稳定性，我们设计了一个在原子氢气氛中热退火的同时进行光诱导退火的实验(TLAH)。实验装置是由传统的微波电子回旋共振化学气相沉积系统改造而成为热丝辅助微波电子回旋共振化学气相沉积系统。为了对这一退火方法进行比较，对样品还进行了热退火、热退火同时进行光诱导退火。同时，为了定量地分析光电导衰退，我们假设光电导衰退遵循扩展指数规律：1/σph=1/σs-(1/σs-1/σ0)exp[-(t/τ)β]，这里扩展指数参数β 和时间常数 τ 可从与 lnt 的线性关系中截距和斜率得到, 式中光电导饱和值σs可以通过在对数坐标系中表示的光电导和光照时间关系进行高斯拟合得到。实验结果显示：TLAH 方法可以提高氢化非晶硅薄膜的稳定性、改善其微结构和光电特性，同时还发现，光学带隙明显减小、荧光光谱显著地朝着低能方向移动。     

HW-MWECR-CVD法制备氢化微晶硅薄膜及其微结构研究

用热丝辅助微波电子回旋共振化学气相沉积方法制备出高晶化体积分数的氢化微晶硅(μc-Si:H)薄膜.拉曼散射和X射线衍射技术对样品的微观结构测量分析表明，当反应气体中SiH₄浓度在3.6%—50%之间大范围变化时，μc-Si:H薄膜均具有高的晶化体积分数.进一步的分析表明，在SiH₄浓度较大时制备的薄膜，其结构以非晶-微晶的过渡相为主.薄膜易于晶化或生长为过渡相的主要原因是微波电子回旋共振使SiH₄气体高度分解，等离子体高度电离. 关键词： 微波电子回旋共振化学气相沉积 氢化微晶硅薄膜 拉曼散射 X射线衍射     

2—氨基苯并噻唑萃取铑及铑,铱分离的研究

本文研究用２－氨基苯并噻唑（简写ＡＢＴ）溶剂萃取铑的最佳条件，在ＫＩ存在下于ｐＨ１～３，加热６０ｍｉｎ，所形成的络合物能定量地被己烷萃取，贱金属离子如Ｆｅ＾３＋，Ａｌ＾３＋，Ｃｕ＾２＋，Ｃｄ＾２＋，Ｃｏ＾２＋，Ｎｉ＾２＋，Ｚｎ＾２＋，Ｍｎ＾２＋，Ｃａ＾２＋，Ｍｇ＾２＋及铂族离子Ｐｔ（Ⅳ），Ｉｒ（Ⅳ）不被萃取，Ｐｄ＾２＋，可在未加入ＫＩ之前预先萃取分离，斜率测得萃合物组成为ＲｈＩ３（ＡＢＴ），红外光     

采用热丝辅助的新型微波电子回旋共振法制备高质量的氢化非晶硅薄膜

采用热丝辅助的新型微波电子回旋共振法制备了高质量的氢化非晶硅薄膜。在制备过程中，热丝对改进薄膜微结构，提高稳定性及光电特性方面起到了重要的作用。实验结果表明：在薄膜的微结构中，硅氢二键含量显著减少并出现了少量微晶相，其有利于改善薄膜的稳定性；在薄膜的光电特性方面，薄膜的沉积速率及光敏性分别达到了2.0nm/s和4.71*105以上。     

热丝辅助MW ECR CVD技术高速沉积高质量氢化非晶硅薄膜

氢化非晶硅薄膜具有优异的光电特性,在制备薄膜太阳能电池中有重要的应用.本文采用热丝辅助MWECR CVD技术,通过调整各种工艺参数,制备了高沉积速率(DR＞2.5nm/s)及高光敏性(σph/σD＞105)的氢化非晶硅薄膜.实验表明,在衬底表面温度的分布中,热丝辐射和离子轰击引起的温度对薄膜的光敏性影响较大;在薄膜沉积的最后几分钟适当加大H2稀释率,有利于薄膜光电特性的改善.     

采用两步压强法制备优质微晶硅薄膜

针对氢化微晶硅薄膜吸收系数较低、制备需要较高厚度,从而需要较高沉积速度的问题,考虑到压强对沉积速度及晶化比的重要影响,在分析了单一压强法制备薄膜优缺点的基础上,提出了采用两步法来制备高质量微晶硅薄膜的方法。即先采用高压制备薄膜2m in,减小非晶转微晶的孵化层厚度,然后再采用低压制备薄膜18m in,提高薄膜的致密度及减小氧含量,最后制备出了光敏性较高,晶化比较大并且光照稳定性也较好的优质氢化微晶硅薄膜。     

Preparation of hydrogenated microcrystalline silicon films with hot-wire-assisted MWECR-CVD system

Intrinsic hydrogenated microcrystalline silicon （μc-Si：H） films have been prepared by hot-wire-assisted microwave electron-cyclotron-resonance chemical vapour deposition （HW-MWECR-CVD） under different deposition conditions, Fourier-transform infrared spectra and Raman spectra were measured. Optical band gap was determined by Tauc plots, and experiments of photo-induced degradation were performed. It was observed that hydrogen dilution plays a more essential role than substrate temperature in microcrystalline transformation at low temperatures. Crystalline volume fraction and mean grain size in the films increase with the dilution ratio （R=H2/（H2＋SiH4））. With the rise of crystallinity in the films, the optical band gap tends to become narrower while the hydrogen content and photo-induced degradation decrease dramatically. The samples, were identified as μc-Si：H films, by calculating the optical band gap. It is considered that hydrogen dilution has an effect on reducing the crystallization activation energy of the material, which promotes the heterogeneous solid-state phase transition characterized by the Johnson-Mehl-Avrami （JMA） equation. The films with the needed structure can be prepared by balancing deposition and crystallization through controlling process parameters.     

Study on stability of hydrogenated amorphous silicon films

Hydrogenated amorphous silicon （a-Si：H） films with high and same order of magnitude photosensitivity （-10^5） but different stability were prepared by using microwave electron cyclotron resonance chemical vapour deposition system under the different deposition conditions. It was proposed that there was no direct correlation between the photosensitivity and the hydrogen content （CH） as well as H-Si bonding configurations, but for the stability, they were the critical factors. The experimental results indicated that higher substrate temperature, hydrogen dilution ratio and lower deposition rate played an important role in improving the microstructure of a-Si：H films. We used hydrogen elimination model to explain our experimental results.