基于碳纳米管X射线源的生物医学成像

Although discovered more than 100 years ago, X-ray source technology has evolved rather slowly. The recent invention of the carbon nanotube (CNT) X-ray source technology holds great promise to revolutionize the field of biomedical X-ray imaging. CNT X-ray sources have been successfully adapted to several biomedical imaging applications including dynamic micro-CT of small animals and stationary breast tomosynthesis of breast cancers. Yet their more important biomedical imaging applications still lie ahead in the future, with the development of stationary multi-source CT as a noteworthy example.     

某光电雷达稳定平台关键部件转板的动态特性分析

 转板是光电雷达稳定平台的关键元件之一。为了更好地设计和分析某光电雷达稳定平台的转板,运用Pro E软件对其进行三维实体建模,合理简化后,进入Ansys软件界面建立有限元模型。应用有限元理论和Ansys软件对其进行动态特性分析,得到了转板前八阶模态的固有频率和振型,以及要求范围内的谐响应。对比了不同方法划分网格的网格质量,采取不同材料得到了不同模态。分析结果表明：设计的转板在关心的频段0~50 Hz,2 000 Hz~8 000 Hz内不发生共振,符合设计要求。     

Organic Light Emitting Diodes with an Organic Acceptor/Donor Interface Involved in Hole Injection

Organic light emitting diodes with an interface of organic acceptor 3-, 4-, 9-,10-perylenetetracarboxylic dianhydride （PTCDA） and donor copper phthalocyanine （CuPc） involved in hole injection are fabricated. As compared to the conventional device using a 5 nm CuPc hole injection layer, the device using an interface of 10nm PTCDA and 5 nm CuPc layers shows much lower operating voltage with an increase of about 46% in the maximum power efficiency. The enhanced device performance is attributed to the efficient hole generation at the PTCDA/CuPc interface. This study provides a new way of designing hole injection.     

大非减持与真实盈余管理

本文利用深圳证券交易所A股上市的503家非金融行业公司构成的平衡面板数据,研究了大非减持与真实盈余管理的关系.研究发现,大非在减持过程中存在明显的管理真实盈余的行为,发生大非减持的上市公司有更大的倾向管理真实盈余,而且大非减持股份比例越高的上市公司,对真实盈余管理的程度也越高.     

The performance enhancement in organic light-emitting diode using a semicrystalline composite for hole injection

A semicrystalline composite, 3, 4, 9, 10 perylenetetracarboxylic dianhydride （PTCDA） doped N,N＇-di（1-naphthyl）- N,N＇-diphenylbenzidine （NPB）, has been fabricated and characterized. An organic light-emitting diode using such a composite in hole injection exhibits the improved performance as compared with the reference device using neat NPB in hole injection. For example, at a luminance of 2000 cd/m2, the former device gives a current efficiency of 2.0cd/A, higher than 1.6cd/A obtained from the latter device. Furthermore, the semicrystalline composite has been shown thermally to be more stable than the neat NPB thin film, which is useful for making organic light emitting diodes with a prolonged lifetime.     

圆外Stokes问题的边界积分公式

针对圆外区域的Stokes问题,利用Fourier展开法,通过自然边界归化得到了一个只与边界速度有关的Stokes问题的边界积分公式.根据此公式及边界速度值,求得区域内速度及压力分布的解析表达式,并通过数值积分的方法进行求解,计算量小,所得速度及压力分布图曲线光滑.最后借助流体软件进行数值计算,结果验证了边界积分公式的正确性、可行性.     

基于多激光传感器装配的自由曲面法线找正方法研究

在国产化、技术自主化的大型飞机项目上,对孔位精度的标准正逐步升高,钻头的垂直度又是这一标准中最受关注的条件。机器人自动钻铆系统工作时,所产生的装配误差、磕碰、偏移等状况,不仅降低了制造及检测的准确度,还影响了整个结构件的疲劳性能。针对这一问题,提出了基于多激光传感器装配的自适应自由曲面法线检测技术,搭建了以该方法进行姿态找正的数学模型,并研究了检测装置的标定方法及流程。同时,着重讨论了在自适应方法检测时,利用电子经纬仪等装置进行误差补偿的相关技术。该方法的验证实验结果显示,多组实验数据均达到了法向精度<±0.5°的关键技术指标要求,找正后的法线平均偏差值为0.0667°。该方法能有效补偿在制孔工作中所产生的相关误差,进一步提高机器人的定位精度及法线方向检测精度。     

Influence of Zr(50)Cu(50) thin film metallic glass as buffer layer on the structural and optoelectrical properties of AZO films

Aluminum-doped ZnO(AZO) thin films with thin film metallic glass of Zr(50)Cu(50) as buffer are prepared on glass substrates by the pulsed laser deposition. The influence of buffer thickness and substrate temperature on structural, optical, and electrical properties of AZO thin film are investigated. Increasing the thickness of buffer layer and substrate temperature can both promote the transformation of AZO from amorphous to crystalline structure, while they show(100)and(002) unique preferential orientations, respectively. After inserting Zr(50)Cu(50) layer between the glass substrate and AZO film, the sheet resistance and visible transmittance decrease, but the infrared transmittance increases. With substrate temperature increasing from 25℃ to 520℃, the sheet resistance of AZO(100 nm)/Zr(50)Cu(50)(4 nm) film first increases and then decreases, and the infrared transmittance is improved. The AZO(100 nm)/Zr(50)Cu(50)(4 nm) film deposited at a substrate temperature of 360℃ exhibits a low sheet resistance of 26.7 ?/, high transmittance of 82.1% in the visible light region, 81.6% in near-infrared region, and low surface roughness of 0.85 nm, which are useful properties for their potential applications in tandem solar cell and infrared technology.     

某型内转子光电雷达稳定平台的模态分析与优化

为了更好地设计某型内转子光电雷达稳定平台,运用Pro-E软件对其进行了三维实体建模,合理简化后,进入Ansys软件建立有限元模型.应用有限元理论和Ansys软件对该平台进行了模态分析,得到稳定平台前八阶模态的固有频率和振型.其中对比了不同网格、不同材料产生的不同模态,对同类分析提供了参考,也为此稳定平台的设计优化提供了...     

基于数值模拟的涡轮风扇结构优化设计

采用有限元方法分析出涡轮风扇支板个数为10时发生断裂的原因是高周疲劳破坏,并且叶片发生疲劳的主要原因是支板个数设置不合理.通过Campbell图分析出了两种优化方案,即支板个数为3和19.从共振点个数、应力水平及理论寿命来看,支板个数为19均优于3.分别对支板个数为10和3的叶片进行疲劳寿命模拟计算,结果表明,两者的疲劳寿命均较短,不符合工程实际要求,最终确定支板个数19为优化方案.