A scheme of optical interconnection for super high speed parallel computer

An optical cross connection network which adopts coarse wavelength division multiplexing (CWDM) and data packet is introduced. It can be used to realize communication between multi-CPU and multi-MEM in parallel computing system. It provides an effective way to upgrade the capability of parallel computer by combining optical wavelength division multiplexing (WDM) and data packet switching technology. CWDM used in network construction, optical cross connection (OXC) based on optical switch arrays, and data packet format used in network construction were analyzed. We have also done the optimizing analysis of the number of optical switches needed in different scales of network in this paper. The architecture of the optical interconnection for 8 wavelength channels and 128 bits parallel transmission has been researched. Finally, a parallel transmission system with 4 nodes, 8 channels per node, has been designed.     

机械阻抗测量的一种新方法

本文介绍了一种新的机械阻抗测量方法－声强法，由定义出发将机械阻抗表为功率流和加速度响应谱的函数，应用结构声强技术测量功率流，声强法不需要测量作用力信号，可以用于测量任意结构中的各类机械阻抗，实验结果表明，声强获得的测量值与直接获得的测量值相近，声强法能较准确地测量一维和二维匀质结构中机械阻抗。     

HL-1工程联调中真空室的放电清洗

HL-1托卡马克装置工程联调时,内真空系统经200℃60小时烘烤和7万次脉冲放电清洗,接着作了124次低参数托卡马克放电。在环向磁场为15kG下获得了60kA的等离子体电流,等离子体存在时达85ms,本文总结分析了HL-1工程联调期间真空系统的烘烤、真空室的放电清洗技术及效果。     

A new burst assembly technique for supporting QoS in optical burst switching networks

This letter proposes a new burst assembly technique for supporting QoS in optical burst switching (OBS) networks. It consists of the adaptive-threshold burst assembly mechanism and QoS-based random offset-time scheme. The assembly mechanism, which is fit well to multi-class burst assembly, not only matches with IP QoS mechanism based on packet classification, and also utilizes fairly and efficiently assembly capacity. Based on token-bucket model and burst segment selective discard (BSSD), the offset-time scheme can smooth the traffic to support OBS QoS. The simulation results show that the technique can improve the performance in terms of packet loss probability (PLP).     

核酸适配体功能化纳米复合材料用于靶向凝血酶的心血管疾病治疗

制备了一种核酸适配体功能化磁球/金纳米棒复合材料,该复合材料可以实现凝血酶活性的可逆调控。凝血酶与其一对核酸适配体基于邻近表面杂交技术可构建成闭环结构,这种闭环结构会使核酸适配体与凝血酶的结合作用增强,从而大大增强抑制效果;金纳米棒具有局部表面等离子体共振效应,在近红外光刺激下周围环境温度升高破坏了闭环结构并伴随着凝血酶的活性的恢复。利用监测散射变化和扫描电子显微镜等手段表征了酶活性的变化。人血清凝血时间的测定证明这种抑制与恢复方法具有非常好的临床应用前景。此外,模拟透析实验显示该方法还可应用于急性肾功能衰竭等疾病的血液滤过治疗的抗凝和解毒中。     

飞秒激光烧蚀齿曲面的复耦合模型及形貌影响

针对飞秒激光烧蚀齿曲面过程中能量累积效应与变离焦效应对齿面形貌与烧蚀尺寸的影响问题,建立飞秒激光烧蚀复耦合模型,通过有限差分法求解得到激光烧蚀面齿轮材料18Cr2Ni4WA的电子与晶格在不同的脉宽与能量密度下的温度变化分布,对烧蚀凹坑的深度及半径进行仿真。考虑激光束在加工齿面时,与被加工齿面之间存在倾斜角,根据光斑能量分布方式得到齿面底角与激光能量的定量关系,结合焦半径与折射率的变化,对飞秒激光烧蚀齿面深度、半径与形貌进行研究。通过实验得到当激光能量密度为1.783 J/cm²且被加工齿面底角过大时,激光能量降低烧蚀过程只发生在材料表面;当能量密度为2.376 J/cm²、激光脉冲数为3 000时,烧蚀凹坑的微结构细密良好。研究结果表明飞秒激光烧蚀曲面时,激光有效能量随着倾斜角的变化降低,同时激光光斑的能量分布影响了烧蚀凹坑深度的变化,可为提高飞秒激光加工齿曲面质量提供参考。     

A scheme of optical interconnection for super high speed parallel computer

An optical cross connection network which adopts coarse wavelength division multiplexing (CWDM) and data packet is introduced. It can be used to realize communication between multi-CPU and multi-MEM in parallel computing system. It provides an effective way to upgrade the capability of parallel computer by combining optical wavelength division multiplexing (WDM) and data packet switching technology. CWDM used in network construction, optical cross connection (OXC) based on optical switch arrays, and data packet format used in network construction were analyzed. We have also done the optimizing analysis of the number of optical switches needed in different scales of network in this paper. The architecture of the optical interconnection for 8 wavelength channels and 128 bits parallel transmission has been researched. Finally, a parallel transmission system with 4 nodes, 8 channels per node, has been designed.