Design of a capacitive main power coupler for RF superconducting accelerators

An updated main coupler has been designed for the superconducting accelerator of Free Electron Laser (FEL) project under construction in Peking University. A capacitive structure is chosen for the main coupler. Numerical investigation using CST Microwave Studio demonstrates the cold window part. The other nonstandard structures such as holding rods and antenna are also optimized. The coupler uses a 95% purity Al₂O₃ ceramic cold window. The VSWR (Vottage Standing Wave Ratio) is 1.02 at 1.3GHz and the frequency bandwidth is 45MHz with VSWR<1.1. The electric field intensity is 8.5×10^－2kV/mm around the window with 20kW Continuous Wave (CW) transmitted power. The Q_ext is designed variable from 5×10⁶ to 1×10⁷.     

Impact on the magnetic compressor due to CSR

When an electron bunch is compressed in a chicane compressor, the CSR (coherent synchrotron radiation) will induce energy redistribution along the bunch. Such energy redistribution will affect the longitudinal emittance as a direct consequence. It will also excite betatron oscillation due to the chromatic transfer functions, and hence a transverse emittance change. So, it is indispensable for us to find a way to alleviate the CSR-caused emittance dilution and the bad result of chicane compressor in PKU-FEL.     

软X光能谱仪探测元件晌应曲线标定

报道了软X光能诺仪探别元件的能量响应曲线标定工作．实验利用北京同步辐射装置-3W1B束经及反射率计靶室，在束流40—80mA、贮存环电子能量2.2GeV专用光运行模式下，在150—1500eV能区的四个能段，做了铝阴极X射线二权管、滤光片及擦入射平面反射镜能量响应标定实验，通过实验数据比对及分析，最终给出X射线二极管在不同能量段最大可能的测量误差范围。     

改进的TESLA式高阶模衰减器的实验研究

讨论了TESLA型高阶模耦合器的改进, 对所设计的改进型TESLA式高阶模耦合器进行实验, 对理论计算与实验结果进行详细分析, 结果表明改进的高阶模耦合器理论计算和实验结果符合得较好.     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

降温速率对低温保存动脉粘弹性的影响

使用DMA测定了3种降温速率低温保存的家兔颈总动脉的蠕变曲线.结果表明:1.5℃/min降温速率低温保存后,血管的粘弹性最接近新鲜对照组;而对应降温速率1.5,5,10℃/min,血管粘弹性依次降低.动脉的粘弹性极有可能是评估其低温保存效果的潜在评价指标.     

反应溅射法制备TiO2薄膜

报道了用反应溅射法制备TiO₂薄膜的实验研究.详细研究了氧分压、基底温度和退火温度对成膜结构的影响.制备出了具有金红石和锐钛矿晶体结构的TiO₂薄膜.分析了金红石和锐钛矿晶体的形成条件,并对薄膜的表面形貌进行了测量. 关键词： 反应溅射 2薄膜')" href="#">TiO₂薄膜     

含不同柔性链的(甲基)丙烯酸酯类液晶高分子的合成及其液晶行为研究

通过改变侧链中柔性间隔基的长度,合成了一系列含有两个手性中心的侧链液晶（甲基）丙烯酸酯类聚合物.红外、核磁和GPC表征各中间体、单体及聚合物的结构和分子量.通过DSC和热台偏光显微镜系统地研究了单体和聚合物的液晶态织构.结果表明,含有六个碳的柔性间隔基的丙烯酸酯类聚合物表现为近晶SA和手性近晶SC^＊液晶相.     

激光驱动高亮度电子束源

采用激光驱动光阴级和１００ｋＶ直流加速间隙可产生宽度为５０～１００ｐｓ的高亮度脉冲电子束．该装置主要由光阴极制备室和直流加速间隙组成．可以用化学气相沉积、离子注入和离子束增强沉积等方法制备光阴极．通过用ＥＧＵＮ和ＰＯＩＳＳＯＮ程序模拟,给出了直流加速间隙的物理设计．光源采用一台主被动双锁的Ｎｄ:ＹＡＧ激光器,可工作在１０６４、５３２和２６６ｎｍ三个波长,重复频率为１０Ｈｚ．此外,也论述了光阴极制备室与超与腔结合的超导高亮度注入器的有关问题. A DC high brigytness laser driven by photoemissive electron gun is being developed at Peking University,in order to produce 50～100ps electron bunches of high quality.The gun consists of a photocathode preparation chamber and a DC acceleration cavity.Different ways of fabricating photocathode,such as chemical vapor deposition,ion beam implantation and ion beam enhanced deposition,can be adopted.The acceleration gap is designed with the aid of simulation codes EGUN and POISSON,100kV DC high voltage is...