多孔硅的微结构与发光特性研究

利用原子力显微镜（AFM）和光致荧光（PL）光谱对一系列直流腐蚀和脉冲腐蚀的多孔硅的微结构及发光特性进行了对比研究．表面和侧面的AFM结果表明，多孔硅表面呈“小山”状，有许多小的、突出的硅颗粒．在相同的腐蚀条件（等效）下，脉冲腐蚀的样品表面Si颗粒更加尖锐、突出，侧面的线状结构更明显，多孔硅层更厚．对应的PL谱，脉冲腐蚀的样品发光更强．量子限制效应的理论可以比较成功地解释这个结果 关键词：     

Effects of Substrate Hydrophobicity/Hydrophilicity on Height Measurement of Individual DNA Molecules

Effects of substrate hydrophobicity/hydrophilicity on height measurement of individual ds-DNA molecules are investigated with tapping mode atomic force microscopy （TMAFM） and vibrating mode scanning polarization force microscopy （VSPFM）. The measured heights of ds-DNA on hydrophobic highly oriented pyrolytic graphite （HOPG） are remarkably less than those on hydrophilic bare mica and Ni^2＋ treated mica in both TMAFM and VSPFM. By analysing the results, we propose that the hydrophobicity/hydrophilicity of substrate can greatly influence the height measurement of DNA molecules.     

NANOBUBBLES AT THE LIQUID/SOLID INTERFACE STUDIED BY ATOMIC FORCE MICROSCOPY

Bubbles on the nanometer scale were produced by a special method on solid surfaces. Atomic Force Microscopy (AFM) was used to detect these bubbles. It shows that nanobubbles can be seen clearly in the interfaces of liquid/graphite and liquid/mica. In AFM images, the nanobubbles appeared like bright spheres. Some of the bubbles kept stable for hours during the experiments. The bubbles were disturbed under high load during AFM imaging. The conformation of the bubbles is influenced by the atomic steps on the graphite substrate. In addition, a shadow was found around the bubbles, which was due to the interactions between a bubble adhered to the tip and a bubble on the substrate.     

原子力显微镜对TeOx薄膜中短波长静态记录点结构的分析

以真空蒸镀法在K9基底上制备了TeOx单层薄膜,采用特定的定位方法,使用原子力显微镜对不同记录功率下薄膜中短滤长静态记录点（514．5nm)的结构进行了分析。实验结果表明薄膜具有良好的记录灵敏性,在记录功率1．5mW时就可产生较高的反射率对比度,记录点具有明显的凹陷和凸起结构,随着记录功率的提高,凹陷和凸起增强,记录点增大。记录点的形态结构和记录前后反射率对比度是直接相关的。研究揭示了原子力显微镜在提高薄膜存储特性如信噪比,存储密度等方面的分析功能。     

非晶Ni88P12合金薄膜的表面形貌特征与晶化行为的研究

采用化学镀的方法在363K和p型Si（100）衬底上制得非晶Ni₈₈P₁₂合金薄膜．利用X射线衍射、X射线光电子能谱、扫描隧道显微镜和原子力显微镜对非晶合金薄膜及其经处理后形成的氧化态、还原态和晶态的结构、组分和表面的形貌特征作了研究，并对它的晶化行为作了初步探讨．结果表明，非晶合金薄膜是由纳米级微粒聚集成微米级颗粒组成；在低于晶化温度条件下经氧化和还原处理后的薄膜表面晶化；在晶化过程中，合金薄膜的非晶纳米微粒转变为微晶后长大成晶粒，其表面结构光滑平坦，几何边界 关键词：