实时在线化学发光监测水体亚硝酸盐

构建了一个实时在线监测水体样品中低含量亚硝酸盐的化学发光分析系统。采用连续采样方式,在线将NO-2转换为HOONO并立即与Luminol反应,实现了对亚硝酸盐的全自动连续检测。方法的线性范围为1.0×10-8~1.0×10-5 mol/L,线性相关系数R2=0.9989,检出限为5.0×10-9 mol/L。与国家标准方法对比验证了新方法的可靠性。考察了自来水煮沸、持续煮沸、持续亚沸及多次煮沸等处理方式对亚硝酸盐含量的影响。实验表明,该分析系统可用于水加热处理过程和地表水中亚硝酸盐含量的监测。为健康饮水提供了参考依据。     

Effects of preparation parameters on growth and properties of β-Ga2O3 film

The Ga$_{2}$O$_{3}$ films are deposited on the Si and quartz substrates by magnetron sputtering, and annealing. The effects of preparation parameters (such as argon-oxygen flow ratio, sputtering power, sputtering time and annealing temperature) on the growth and properties ($e.g.$, surface morphology, crystal structure, optical and electrical properties of the films) are studied by x-ray diffractometer (XRD), scanning electron microscope (SEM), and ultraviolet-visible spectrophotometer (UV-Vis). The results show that the thickness, crystallization quality and surface roughness of the $\beta $-Ga$_{2}$O$_{3}$ film are influenced by those parameters. All $\beta $-Ga$_{2}$O$_{3 }$films show good optical properties. Moreover, the value of bandgap increases with the enlarge of the percentage of oxygen increasing, and decreases with the increase of sputtering power and annealing temperature, indicating that the bandgap is related to the quality of the film and affected by the number of oxygen vacancy defects. The $I$-$V$ curves show that the Ohmic behavior between metal and $\beta $-Ga$_{2}$O$_{3}$ films is obtained at 900 ${^\circ}$C. Those results will be helpful for the further research of $\beta $-Ga$_{2}$O$_{3}$ photoelectric semiconductor.     

碳钢的高应力冲击磨损行为研究

在高应力冲击磨损条件下，金属材料的磨损表面很容易形成硬度很高（ＨＶ≥１０００）的白层．采用新的试验方法，研究了碳钢在高应力冲击条件下的磨损特征，并且从分析白层的结构出发，讨论了白层的形成机制和失效模式．结果表明，材料的高应力冲击磨损质量损失与冲击次数之间具有线性关系，韧性较好的低碳钢的耐磨性比高碳钢的好，原因是硬度越高，白层在磨损过程中越容易发生剥层与剥落．白层是一种高度塑性变形层，其内部精细结构的变形特征证实了白层的塑性变形机制     

Improve the performance of interferometer with ultra-cold atoms

Ultra-cold atoms provide ideal platforms for interferometry.The macroscopic matter-wave property of ultra-cold atoms leads to large coherent length and long coherent time,which enable high accuracy and sensitivity to measurement.Here,we review our efforts to improve the performance of the interferometer.We demonstrate a shortcut method for manipulating ultra-cold atoms in an optical lattice.Compared with traditional ones,this shortcut method can reduce the manipulation time by up to three orders of magnitude.We construct a matter-wave Ramsey interferometer for trapped motional quantum states and significantly increase its coherence time by one order of magnitude with an echo technique based on this method.Efforts have also been made to enhance the resolution by multimode scheme.Application of a noise-resilient multi-component interferometer shows that increasing the number of paths could sharpen the peaks in the time-domain interference fringes,which leads to a resolution nearly twice compared with that of a conventional double-path two-mode interferometer.With the shortcut method mentioned above,improvement of the momentum resolution could also be fulfilled,which leads to atomic momentum patterns less than 0.6hkL. To identify and remove systematic noises,we introduce the methods based on the principal component analysis (PCA) that reduce the noise in detection close to the 1/√2 of the photon-shot noise and separate and identify or even eliminate noises.Furthermore,we give a proposal to measure precisely the local gravity acceleration within a few centimeters based on our study of ultracold atoms in precision measurements.     

稀土元素的摩擦学研究发展概况

本文对稀土元素的摩擦学研究发展概况作了综述与讨论,主要涉及的是稀土金属及稀土无机化合物和稀土配合物作为润滑油、脂及润滑涂层的添加剂的摩擦学特性,并对稀土无机化合物的高温润滑特性、稀土金属及其化合物在高温涂层中的应用作了简要讨论,最后还提出了稀土的摩擦学研究中当前值得注意的几个重要课题。     

液相质谱测定非极性或弱极性物质的研究进展

从衍生、离子加合、离子源、裂解等方面对近年来液相质谱测定非极性或弱极性物质的研究进行综述。其中,衍生方式主要介绍了醛酮类化合物、醇类化合物、胺类化合物、烯烃与炔烃等物质的衍生方式,离子加合主要介绍了铵根离子加合等正离子加合模式与甲酸根等负离子加合模式,离子源主要介绍了大气压化学电离(APCI)、APPI、DESI三种离子源在测定非极性或弱极性物质的研究,裂解方式以三氯杀螨醇为例子。文章以实例对液相质谱测定非极性或弱极性物质的策略进行了讨论,对它们的现状和未来前景进行预测。     

沉积温度对硬质合金表面沉积的SiC薄膜的影响

采用强电流直流伸展电弧等离子体CVD技术,以Ar、H2和四甲基硅烷(TMS)为先驱气体,在YG6硬质合金衬底表面制备了SiC薄膜。实验结果表明:随着沉积温度的升高,薄膜的致密性和平整度提高;但当沉积温度过高时,SiC薄膜的表面开始具有含非晶碳球和呈花瓣状的疏松结构。在合适的沉积温度下,SiC薄膜的致密性和平整度较好,且其具有较好的附着力和一定的强度,而这样的SiC薄膜可以阻止在金刚石涂层沉积过程中硬质合金中含有的Co对金刚石相沉积过程的有害作用。     

一种混沌海杂波背景下的微弱信号检测方法

基于复杂非线性系统的相空间重构理论,提出了一种基于遗传算法的支持向量机预测方法.利用改进的自相关法和饱和关联维数法确定混沌信号的时间延迟和嵌入维,从而实现相空间重构.通过遗传算法优化支持向量机中的惩罚系数和核函数参数,并结合支持向量机建立混沌序列的单步预测模型,从预测误差中检测出淹没在混沌背景中的微弱信号(包括瞬态信号和周期信号).以Lorenz系统和加拿大McMaster大学利用IPIX雷达实测得到的海杂波数据作为混沌背景噪声进行仿真实验,结果表明该方法能够有效地从混沌背景噪声中检测出微弱目标信号,所得的均方根误差为0.00049521(信噪比为-89.7704 dB),这比传统支持向量机方法的均方根误差(0.049,信噪比为-54.60 dB)降低了两个数量级.