Zn离子注入和退火对ZnO薄膜光学性能的影响

 利用溶胶凝胶方法在石英玻璃衬底上制备了ZnO薄膜，将能量56 keV、剂量1×10¹⁷ cm^-2的Zn离子注入到薄膜中。离子注入后，薄膜在500~900 ℃的氩气中退火，利用X射线衍射谱、光致发光谱和光吸收谱研究了离子注入和退火对ZnO薄膜结构和光学性质的影响。结果显示：衍射峰在约700 ℃退火后得到恢复；当退火温度小于600 ℃时，吸收边随着退火温度的提高发生蓝移，超过600 ℃时，吸收边随着退火温度的提高发生红移；近带边激子发光和深能级缺陷发光都随退火温度的提高而增强。     

溶剂对块体La基气凝胶性能的影响

采用溶胶-凝胶工艺,以氯化镧(LaCl3·7H2O)为前驱体,以甲醇和乙醇为溶剂,聚丙烯酸为分散剂,环氧丙烷为凝胶促进剂,分别合成两种性能不同的稀土La基气凝胶。采用扫描电子显微镜、傅里叶红外光谱仪、比表面积与孔径分析仪、力学性能测试仪对不同溶剂制备的两种稀土La基气凝胶的微观结构、成分、比表面积、孔径分布和力学性能进行了研究表征。结果表明,以甲醇和乙醇为溶剂制备的稀土La基气凝胶都具有纳米多孔材料的典型特征,由大量nm量级的球形和长条形颗粒胶连而成,孔洞结构丰富。以乙醇为溶剂制备的稀土La基气凝胶的网络骨架更纤细,孔洞更大,比表面积达到220m2·g-1,密度约为160mg·cm-3,但力学性能较差。而以甲醇为溶剂制备的稀土La基气凝胶的网络骨架更强壮,孔洞更小,比表面积达到95m2·g-1,密度约为350mg·cm-3,力学性能较好。样品性能上的差异可能是由甲醇的极性比乙醇的极性强引起的。     

The effect of Si content on the martensitic transfor-mation temperature of Ni55.5e18Ga26.5-xSix alloys

This paper investigates the effects of substitution of Si for Ga on the martensitic transformation behaviours in Ni-Fe-Ga alloys by using optical metallographic microscope and differential scanning calorimetry (DSC) methods. The structure type of Ni_55.5Fe₁₈Ga_26.5-xSi_x alloys is determined by x-ray diffraction (XRD), and the XRD patterns show the microstructure of Ni-Fe-Ga-Si alloys transformed from body-centred tetragonal martensite (with Si content x = 0) to body-centred cubic austenite (with x = 2) at room temperature. The martensitic transformation temperatures of the Ni_55.5Fe₁₈Ga_26.5-xSi_x alloys decrease almost linearly with increasing Si content in the Si content range of x ≤ 3. Thermal treatment also plays an important role on martensitic transformation temperatures in the Ni-Fe-Ga-Si alloy. The valence electronic concentrations, size factor, L2₁ degree of order and strength of parent phase influence the martensitic transformation temperatures of the Ni-Fe-Ga-Si alloys. An understanding of the relationship between martensitic transformation temperatures and Si content will be significant for designing an appropriate Ni-Fe-Ga-Si alloy for a specific application at a given temperature.     

The effect of Si content on the martensitic transformation temperature of Ni55.5Fe18Ga26.5-xSix alloys

This paper investigates the effects of substitution of Si for Ga on the martensitic transformation behaviours in Ni-Fe-Ga alloys by using optical metallographic microscope and differential scanning calorimetry (DSC) methods. The structure type of Ni55.5Fe18Ga26.5-xSix alloys is determined by x-ray diffraction (XRD),and the XRD patterns show the microstructure of Ni-Fe-Ga-Si alloys transformed from body-centred tetragonal martensite (with Si content x = 0) to body-centred cubic austenite (with x = 2) at room temperature. The martensitic transformation temperatures of the Ni55.5Fe18Ga26.5-xSix alloys decrease almost linearly with increasing Si content in the Si content range of x ≤ 3. Thermal treatment also plays an important role on martensitic transformation temperatures in the Ni-Fe-Ga-Si alloy. The valence electronic concentrations,size factor,L21 degree of order and strength of parent phase influence the martensitic transformation temperatures of the Ni-Fe-Ga-Si alloys. An understanding of the relationship between martensitic transformation temperatures and Si content will be significant for designing an appropriate Ni-Fe-Ga-Si alloy for a specific application at a given temperature.