季铵盐改性四钛酸钾晶须及其吸附性能

通过季铵盐改性四钛酸钾晶须,应用X射线衍射分析、红外光谱,紫外-可见漫反射光谱对改性前后的四钛酸钾晶须进行表征,并初步研究了不同季铵盐改性的四钛酸钾晶须对苯酚吸附性能的研究。实验结果表明,改性前后的四钛酸钾晶须在紫外光区均有较强的光吸收,而在可见光区其吸收则较弱。改性前后四钛酸钾晶须的结构没有改变,季铵盐能够进入层状化合物的层板间,使改性后的层间距稍微增大。与改性前相比,改性后的四钛酸钾晶须对苯酚的吸附量和吸附率有了明显的提高。     

基于数学抽象过程中的问题驱动探析——以“复数的三角表示(第一课时)”教学设计为例

抽象是数学的本质属性,抽象素养是数学六大核心素养之一.用问题串驱动教学过程,启发学生的思维,引导学生积极思考,不仅是教学实践中一个基本的教学策略,也是提升学生学科素养的必要方式.文章以\"复数的三角表示(第一课时)\"为例,通过对教学的设计及反思,浅析在数学抽象的过程中问题情境的设置策略.     

FTIR study of hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide,and acetonitrile in supercritical CO_2

FTIR spectroscopy was used to study the hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide (DMSO),and acetonitrile in supercritical CO_2 at 318.15 K, and 12.5 and 16.5 MPa. The concentrations of the cosolvents range from 0—0.6 mol·L~(-1). The area percentage of absorption bands for hydrogen-bonded and nonhydrogen-bonded species was obtained from the IR spectra. The acid and the cosolvents can form hydrogen bond even when their concentrations are very low. At fixed solute concentration, the extent of hydrogenbonding increases with cosolvent concentration. At higher ethanol concentrations, it seems that one stearic acid molecule can hydrogen bond with more than one ethanol molecules simultaneously. It is seen that the strength of the hydrogen bond formed by the acid and the cosolvents is in the order: DMSO>ethanol>acetonitrile.     

Solubility of stearic acid in supercritical CO_2-acetonitrile mixtures

The solubility of stearic acid in supercritical CO2 with acetonitrile (CH3CN) cosolvent was measured at 318.15 K in the pressure range from 9.5 to 16.5 MPa, and the cosolvent concentration ranges from 0. 0 to 5.5 mol% . The solubility increases with acetonitrile concentration and pressure, and it also increases with the apparent density of CO2 d1(moles of CO2 in per liter of fluid) at higher cosolvent concentrations. At lower d1, however, the solubility of the acid at lower acetonitrile concentrations is lower than that in pure CO2 provided that d1 is fixed, which is discussed qualitatively based on the clustering of the components in the system.     

Density of supercritical CO_2-tetrahydrofuran binary mixture and the partial molar volume of the cosolvent

The densities of supercritical CO2-tetrahydrofuran (cosolvent) binary mixture weremeasured at temperatures in range of 308.15 to 323.15 K and at pressure up to 16.5 MPa.The concentrations of tetrahydrofuran were from 0 to 0.57 mol/L.The partial molar volume of tetrahydrofuran was calculated based on the relationship between the density of the mixture and the concentration of the cosolvent.It is observed that the partial molar volume of the cosolvent is negative and the absolute value decreases with increasing pressure and the concentration of the cosolvent.     

Improved Electrochemical Performance of Mg-doped ZnO Thin Film as Anode Material for Lithium Ion Batteries

Zn1-xMgxO （x = 0, 0.18） thin films were fabricated on the copper substrates by radiofrequency magnetron sputtering using the high pure argon as a sputtering gas. The Zn1-xMgxO films were characterized by X-ray powder diffraction （XRD）, scanning electron microscope （SEM） and galvanostatic tests. The electrochemical test showed an improved electrochemical performance of Zn0.82EMg0.18O thin film as an anode material for lithium ion batteries.     

小分子亲水有机溶剂液-液萃取技术在分析化学中的应用进展

介绍了小分子亲水有机溶剂液-液萃取技术的基本原理、影响因素并对小分子亲水有机溶剂液-液萃取技术的发展前景进行了展望,引用文献20篇.     

气浮浮选分离富集-紫外分光光度法测定水中痕量强力霉素

水样中痕量的强力霉素(DXCC)用正丙醇及无水乙醇(4+1)作混合溶剂,从pH 8的溶液中进行气浮浮选使之分离并富集.加入氯化钠作为分相剂,加入铁(HI)使与DXCC反应生成憎水的络合物而浮选入有机相,在383 am波长处测定有机相的吸光度.吸光度与DXCC浓度在3.1×10-7～2.0×10-5mol·L-1范围内呈线性关系,方法的检出限(3S/N)为2.6×10-7mol·L-1,测定中采用自制的气浮浮选装置.应用所提出的方法分析了3种不同来源的水样,并以此样品作为基体用标准加入法对方法的回收率进行了测定,测得方法的平均回收率为99.7%,测定值的相对标准偏差(n=5)均小于2.5%.     

铅离子印迹聚合物的制备、表征及其在水溶液中的吸附行为研究

以Pb2+为模板,壳聚糖为单体,硅胶为载体,γ-(2,3环氧丙氧)丙基三甲氧基硅烷(KH-560)为偶联剂,利用表面分子印迹技术和溶胶-凝胶法制备了Pb2+ 印迹聚合物.采用傅立叶变换红外光谱法(FT-IR)、紫外光谱法、扫描电镜对Pb2+ 印迹和非印迹聚合物的表面形貌和结构进行表征;并用电感耦合等离子体原子发射光谱法考察了吸附酸度、吸附剂用量、静置时间等对聚合物吸附性能的影响;研究了印迹聚合物在混合溶液中对Pb2+ 的选择性,比较了印迹和非印迹聚合物的吸附容量;并提出了印迹聚合物的印迹吸附机理.在最佳吸附酸度pH=4.5时,0.3 g 吸附剂吸附5 h达到平衡,Pb2+印迹聚合物对模板离子具有较高的选择性,其饱和吸附容量是非印迹聚合物的2倍.