高电荷态离子207Pb36+与金属Nb表面作用产生的二次离子产额

本文报道了利用兰州重离子加速器国家实验室的ECR离子源引出的高电荷态离子207Pb36 入射到金属Nb表面产生的二次离子的实验测量结果.实验发现,二次离子产额Y随入射初动能Ek的增加有先增加后减小的关系,在初动能为576 keV时二次离子产额达到最大.通过对实验点做高斯拟合发现,曲线峰值对应的入射初动能为602 keV.分析表明,这是势能沉积作用与线性级联碰撞过程协同作用的结果.高电荷态离子本身携带的高势能沉积在靶表面引起势能溅射,促进了二次离子的发射;而主导二次离子溅射的过程是动能溅射,它与靶表面的动量沉积(核能损)过程密切相关.  

低速高电荷态离子40Ar16+与云母表面作用中的电子发射研究

报道了由兰州ECR源提供的低速高电荷离子40Ar16 入射到云母表面产生的电子发射的实验测量结果.结果发现,电子发射产额Y与离子入射角ψ有近似1/tanψ的关系.基于经典过垒模型,我们对这一关系进行了理论分析.实验结果和理论结果相当符合,这就间接说明势能电子发射是低速高电荷态离子作用于表面发射电子的一个主要途径.  

高电荷态离子207Pbq+(24≤q≤36)与Si(110)固体表面作用的电子发射研究

报道了利用兰州重离子加速器国家实验室ECR源引出的高电荷态离子²⁰⁷Pb^q+(24≤q≤36)入射到Si(110)表面产生的电子发射的实验测量结果.结果表明,高电荷态离子与固体表面相互作用产生的电子发射产额Y与入射离子的电荷态q、入射角度ψ和入射能量E都有很强的关联.首次发现,电子发射产额Y与入射角度ψ间有接近1/tanψ的关系.理论分析认为,这些过程与基于经典过垒模型的势能电子发射过程密切相关. 关键词： 高电荷态离子 经典过垒模型 电子发射产额  

离子束微探针及其扫描断层分析应用研究

以欧共体离子束物理及材料科学研究所的装置为例介绍了离子束微探针实验装置，给出了利用这一装置开展重离子弹性反冲核分析、研究氢在钛合金中的微观分布及其动力学行为的实验结果．该离子束微探针装置可以用来开展带电离子荧光分析、核反应分析、弹性反冲核分析、卢瑟福背散射分析及沟道效应和高离子束密度、大剂量离子注入等分析和研究工作．同时利用微束扫描分析可获得样品中元素的点、线、面分布信息．利用能量为16MeV、直径为3μm的Si^5 离子束对钛合金中氢进行断层面扫描分析，观测到了氢在钛合金中的非均匀分布，揭示了氢在钛合金中的不同物理、化学状态与空间分布的相关性，为进一步研究钛的氢化和金属钛的表面腐蚀行为提供了科学依据。  

低能氘分子团（d^＋3）与固体靶原子相互作用过程中的团簇 …

通过对三个氘原子组成的氘分子团与三个分立的氘原子在轰击固体靶原子时所激发以Ｘ射线产额的差别的研究，进而揭示氘分了团在以库仑激发方式与靶原子相互作和中所体现出的团簇优势，实验结果显示，在１０－１００ｋｅＶ／ｄ能区，每个分子团中的氘核所激发的Ｘ射线产额平均为相同能量的普通氘核所估激发的Ｘ射线产额的２．５倍，而且该比值具有较高很弱的能量相关性，基于原子库仑相互作用规律对实验现象做了初步解释和简要估算，提  

低能氘分子团(d_3~ )与固体靶原子相互作用过程中的团簇效应研究

通过对三个氘原子组成的氘分子团与三个分立的氘原子在轰击固体靶原子时所激发的Ｘ射线产额的差别的研究，进而揭示氘分子团在以库仑激发方式与靶原子相互作用中所体现出的团簇优势。实验结果显示，在１０－１００ｋｅＶ／ｄ能区，每个分子团中的氘核所激发的Ｘ射线产额平均为相同能量的普通氘核所激发的Ｘ射线产额的２．５倍。而且该比值具有较很弱的能量相关性。基于原子库仑相互作用规律对实验现象做了初步解释和简要估算，提出了分子团与靶原子作用模型。  

XPS and Raman studies of electron irradiated sodium silicate glass

The microstructure modifications of sodium silicate glass induced by 1.2-MeV electron irradiation are studied by x-ray photoelectron spectroscopy and Raman spectroscopy. Depth profile analyses are also performed on the irradiated glass at 109 Gy. A sodium-depleted layer with a thickness of a few tens of nanometers and the corresponding increase of network polymerization on the top surface are observed after electron bombardment, while the polymerization in the subsurface region has a negligible variation with the irradiation dose. Moreover, the formation of molecular oxygen after electron irradiation is evidenced, which is mainly aggregated in the first two-micron-thick irradiated glass surface. These modifications are correlated to the network relaxation process as a consequence of the diffusion and desorption of sodium species during electron irradiation.  

Effect of deuteron density distribution on the deduction of screening potential from the D（d,p）T reaction in Be metals

The D(d,p)T reaction in Be metal environments has been measured to investigate the electron screening effect in metals in an energy region of from 5.5 keV to 10 keV in a center of mass system (CMS) at a temperature of 121 K. The depth distribution of deuteron density in Be metals has an impact on the observed reaction yields. A model of deuteron density distribution in metal has been proposed to obtain the original yields. A screening energy of (116±46) eV has been obtained with the assumed deuteron density distribution model.  

Energy calibration of tagged photons by the d（γ,π~-pp） reaction

The energy of tagged photons, which were provided from the internal photon tagging system of the Laboratory of Nuclear Science, Tohoku University, has been calibrated using the d（γ,π-pp） reaction. Charged pions and protons in the final state were detected with the Neutral Kaon Spectrometer （NKS2）. Photon energies were obtained from the reaction of d（γ,π-pp）. The derived photon energy was consistent with the design of the tagger system and the previous measurement using electron-positron pair production. The consistency demonstrates the performance of NKS2 and the capability of the photon energy calibration using d（γ,π-pp）.  

Production of highly charged argon ions from a room temperature electron beam ion trap

In this work, highly charged ions have been extracted from the advanced Electron Beam Ion Source (EBIS-A) developed in a scientific cooperation between the Dresden University of Technology and the DREEBIT GmbH Dresden. The charge state distributions of ions extracted from the EBIS-A are measured in the pulse and leaky modes under different operation conditions. Ar¹⁶⁺ ions with current of 2 pA are produced and extracted in the leaky mode. 3×10⁵ Ar¹⁸⁺ ions per pulse are extracted in the pulse mode. The ion charge state distribution is a