聚苯胺与还原石墨烯复合材料的微波吸收性能

采用化学氧化法制备聚苯胺与还原石墨烯复合材料。复合材料的结构、晶型和电磁参数分别通过X射线衍射仪及HP8722ES型矢量网络分析仪进行表征、测试与分析。结果表明，同聚苯胺相比，聚苯胺与还原石墨烯复合材料的介电损耗明显增加。而且在复合材料中，石墨烯的含量越大，材料的微波吸收性能越好，在频率波段（9.5~13.4GHz）反射损耗均小于-10 dB，并在频率为11.2 GHz时达到最大反射损耗-29.69 dB。聚苯胺与还原石墨烯的复合使得材料的载流子迁移率变大，吸波特性得到改善。     

Performance improvement of MEH-PPV:PCBM solar cells using bathocuproine and bathophenanthroline as the buffer layers

In this work, bathocuproine (BCP) and bathophenanthroline (Bphen), commonly used in small-molecule organic solar cells (OSCs), are adopted as the buffer layers to improve the performance of the polymer solar cells (PSCs) based on poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunction. By inserting BCP or Bphen between the active layer and the top cathode, all the performance parameters are dramatically improved. The power conversion efficiency is increased by about 70% and 120% with 5-nm BCP and 12-nm Bphen layers, respectively, when compared with that of the devices without any buffer layer. The performance enhancement is attributed to BCP or Bphen (i) increasing the optical field, and hence the absorption in the active layer, (ii) effectively blocking the excitons generated in MEH-PPV from quenching at organic/aluminum (Al) interface due to the large band-gap of BCP or Bphen, which results in a significant reduction in series resistance (Rs), and (iii) preventing damage to the active layer during the metal deposition. Compared with the traditional device using LiF as the buffer layer, the BCP-based devices show a comparable efficiency, while the Bphen-based devices show a much larger efficiency. This is due to the higher electron mobility in Bphen than that in BCP, which facilitates the electron transport and extraction through the buffer layer to the cathode.     

火焰原子吸收光谱法测定不同产地大蒜中11种金属元素的含量

为进一步利用和开发大蒜资源,采用V（硝酸）＋V（高氯酸）=4＋1常压微沸条件下消化,用火焰原子吸收法测定不同产地大蒜中的金属元素Na、Ca、Mg、Mn、Cu、K、Zn、Fe、Cr、Cd和Pb的含量。研究了不同元素的仪器最佳工作条件,并做了准确度和精密度的考察。结果表明,大蒜中Na、Ca、Mg、Mn、Cu、K、Zn、Fe、Cr、Cd和Ph的含量分别为236．49、1598．21、612.44, 6.27, 15.48, 12 172.41, 126.88, 64.46, 1.67, 1.75, 2.02; 172.84, 1 243.38, 610.05, 5.32, 13.60, 11689.65, 120. 07, 78.91, 1.75, 2. 04, 1.97; 136. 90, 1467.93, 574. 16, 6. 27,16.90, 12 263.45, 146.34, 116.20, 1.82, 2.17, 2.25 μg·g^-1。加标回收率为96．60％～105．80％,相对标准偏差（n=9）为：0．24％～4．81％,测定方法简单易行,方便快捷。     

柱壳和锥壳结构自由振动特征的数值计算与校验

为了评估柱壳和锥壳结构自由振动特征数值计算的精度,分析不同边界条件、环肋、纵肋以及流体载荷对自由振动特征的影响,计算并校验了典型壳体结构在空气中、浸没以及浸没并充满水情况下的自由振动特征。结果表明,空气中干模态分析在2 kHz内、单面及双面接触水情况下的流固耦合湿模态分析在500 Hz内的计算精度能够控制在10%以内。壳体流固耦合自由振动分析时可以采用实体单元离散也可以采用壳单元离散的方法,前者精度略高,能够有效保证求解收敛的频带范围更宽,但工作量更大。径长比大于0.2时,浸没于水中的自由振动分析可以转换为内部填充水时的自由振动分析,转换时应保证两者流固耦合湿表面积相等,如半浸水和半充满水,能够有效减小计算量;环肋和流体载荷对壳体自由振动特征的影响明显,环肋使柱壳同阶自振频率增加,流体载荷使柱壳同阶自振频率减小且影响幅度更大,两者均会使得柱壳模态振型呈现错序排列;流固耦合效应对无肋柱壳和环肋柱壳自振频率的影响效果相当;柱壳内外有水相对于单面接触水而言,同阶自振频率进一步减小,模态振型基本不变;流体载荷对环肋锥壳的自振频率和模态振型的影响幅度较对环肋柱壳小。      

Ca₂BO₃Cl:Ce³⁺,Tb³⁺:A novel tunable emitting phosphor for white light-emitting diode

<正>Ca₂BO₃Cl:Ce³⁺,Ca₂BO₃Cl:Tb³⁺,and Ca₂BO₃Cl:Ce³⁺,Tb³⁺ phosphors are synthesized by a high temperature solid-state reaction.The emission intensity of Ce³⁺ or Tb³⁺ in Ca₂BO₃Cl is influenced by the Ce³⁺ or Tb³⁺ doping content,and the optimum concentrations of Ce³⁺ and Tb³⁺ are 0.03 mol and 0.05 mol,respectively.The concentration quenching effect of Ce³⁺ or Tb³⁺ in Ca₂BO₃Cl occurs,and the concentration quenching mechanism is d-d interaction for either Ce³⁺ or Tb³⁺.The Ca₂BO₃Cl:Ce³⁺,Tb³⁺ can produce colour emission from blue to green by properly tuning the relative ratio between Ce³⁺ and Tb³⁺,and the emission intensity of Tb³⁺ in Ca₂BO₃Cl can be enhanced by the energy transfer from Ce³⁺ to Tb³⁺.The results indicate that Ca₂BO₃Cl:Ce³⁺,Tb³⁺ may be a promising double emission phosphor for UV-based white light emitting diodes.     

铜离子标记免疫法测定甲胎蛋白

本文报道了用铜离子标记一催化放大一免疫分析法测定甲胎蛋白(AFP)。该方法用铜离子代替天然酶标记甲胎蛋白,与其抗体发生异相竞争免疫反应后,采用酸化法释放出标记物中铜离子,利用铜离子对过硫酸铵一邻甲氧基酚一硼酸缓冲液显色体系的催化作用,以催化光度法检测铜,并由此间接测定甲胎蛋白的含量。新建方法可检测10～1000ng／mL的甲胎蛋白,操作方便,成本低。该法用于血清样品AFP测定,相对标准偏差小于5．1％,样品加标回收率为87．0％～96．7％,结果满意。     

Improved performance of P3HT：PCBM solar cells by both anode modification and short-wavelength energy utilization using Tb（aca）3phen

The performance of P3HT:PCBM solar cells was improved by anode modification using spin-coated Tb(aca)3phen ultrathin films. The modification of the Tb(aca)3phen ultrathin film between the indium tin oxide(ITO) anode and the PEDOT:PSS layer resulted in a maximum power conversion efficiency(PCE) of 2.99% compared to 2.66% for the reference device, which was due to the increase in the short-circuit current density(Jsc). The PCE improvement could be attributed to the short-wavelength energy utilization and the optimized morphology of the active layers. Tb(aca)3phen with its strong down-conversion luminescence properties is suitable for the P3HT:PCBM blend active layer, and the absorption region of the ternary blend films is extended into the near ultraviolet region. Furthermore, the crystallization and the surface morphology of P3HT:PCBM films were improved with the Tb(aca)3phen ultrathin film. The ultraviolent–visible absorption spectra,atomic force microscope(AFM), and X-ray diffraction(XRD) of the films were investigated. Both anode modification and short-wavelength energy utilization using Tb(aca)3phen in P3HT:PCBM solar cells led to about a 12% PCE increase.     

ZnS∶TbF_3薄膜电致发光器件性能的研究

用射频磁控溅射和扫描电子束蒸发方法研究制备了ZnS∶TbF3薄膜的交流电致发光器件。研究了制备ZnS∶TbF3薄膜电致发光器件的几种因素对电致发光器件性能的影响 ,诸如 ,磁控溅射过程中衬底温度 ,发光层厚度 ,退火等。     

结晶紫选择电极的制备及催化电位法测定碘的研究

根据磷酸介质中碘离子催化高碘酸钠氧化结晶紫的氧化还原反应,应用自制的结晶紫选择电极跟踪紫的 度变化,对催化电位法测定碘进行了研究。测定碘离子 的线性范围为０．２０－５．５μｇ／２５ｍＬ,方法检出限为４．１＊１０＾－９ｇ／ｍＬ。该方法应用于测定食盐和饮用水中碘含量,ＲＳＤ〈４．１％,平均回收率为９５．１％。     

关于树上连续状态马氏泛函的一类强偏差定理

强偏差定理一直是国际概率论界研究的中心课题之一.通过构造适当的非负鞅,将Doob鞅收敛定理应用于几乎处处收敛的研究,给出了一类特殊非齐次树上连续状态马氏泛函的若干强偏差定理.