Yb:CaF2–YF3 transparent ceramics ultrafast laser at dual gain lines

Yb³⁺:CaF₂-YF₃ transparent ceramics with excellent optical quality was successfully fabricated by hot-pressed method. Pulsed laser properties of this ceramics were investigated for the first time. Laser diode (LD) was applied as the pump source to generate a dual-wavelength mode-locked (ML) laser. The maximum average output power was 310 mW, which represents the highest output power of ultrafast calcium fluoride ceramic laser. The spectrum separated at 1048.9 nm and 1049.7 nm with a total pulse duration of 8.9 ps. The interval period between the beating signals was about 4.3 ps, corresponding to a 0.23 THz beat pulse repetition rate. These results demonstrate its potential in producing dual-wavelength ultrashort pulses. These Yb³⁺:CaF₂-YF₃ ceramics with low-cost and short-preparation period are ideal candidate materials for ultrafast lasers.     

单位圆内解析函数和整函数四则运算的精确级和精确型

利用Nevanlianna值分布对具有精确级整函数与单位圆内的解析函数,具有相同增长级和不同型的整函数和解析函数f1（z）与f2（z）四则运算后的精确级、级、精确型和型进行了研究,得到了一些结果,完善了原有的一些结论。     

无机钙钛矿太阳能电池Cs2SnI6的电子结构和光学性质的第一性原理研究

近年来,Cs2SnI6作为一种无毒性、稳定性好的新型钙钛矿材料应用于太阳能电池中,其电池的光电转换效率由最初不到1%增长到现在的8.5%,使之成为有可能替代铅基钙钛矿太阳能电池的新型太阳能电池。本文采用基于广义密度泛函和杂化密度泛函的第一性原理方法研究了Cs2SnI6的电子结构、光学特性和钙钛矿太阳能电池的光电性能参数。研究结果表明,导带底和价带顶位于同一高对称点Γ而属于直接跃迁型半导体,且电子态主要来自于I-5p轨道和Sn-5s轨道。在近红外和可见光波长范围内有较高的吸收系数,当Cs2SnI6钙钛矿厚度达到10μm时,吸收率在311~989 nm之间接近100%,不考虑潜在损失的情况下,理论上太阳能电池可获得短路电流为32.86 mA/cm2、开路电压0.91 V、填充因子87.4%、光电转换效率26.1%。为实验上制备高效Cs2SnI6钙钛矿太阳能电池提供了参考。     

Strategy to mitigate single event upset in 14-nm CMOS bulk FinFET technology

Three-dimensional (3D) TCAD simulations demonstrate that reducing the distance between the well boundary and N-channel metal-oxide semiconductor (NMOS) transistor or P-channel metal-oxide semiconductor (PMOS) transistor can mitigate the cross section of single event upset (SEU) in 14-nm complementary metal-oxide semiconductor (CMOS) bulk FinFET technology. The competition of charge collection between well boundary and sensitive nodes, the enhanced restoring currents and the change of bipolar effect are responsible for the decrease of SEU cross section. Unlike dual-interlock cell (DICE) design, this approach is more effective under heavy ion irradiation of higher LET, in the presence of enough taps to ensure the rapid recovery of well potential. Besides, the feasibility of this method and its effectiveness with feature size scaling down are discussed.     

一类双曲型方程的Hamilton算子半群方法

将一类双曲型方程混合问题转换成一阶抽象Cauchy问题,证明所得Hamilton算子矩阵H在相应空间中生成压缩半群,并借助Fourier变换,采用一致连续半群做逼近的方法,得到H所生成的压缩半群,进而给出了问题的古典解.     

害虫种群尖点突变模型的几何分析

基于尖点突变的性质,对修改后的Logistic模型进行变换,并将其化为具有尖点突变的标准模型.利用微分方程定性理论,对模型进行分析,并根据突变理论,给出突变发生的条件.最后利用仿真验证结论的正确性.     

环氧树脂中磷系阻燃剂协效体系的研究进展

近年来,出于环保等方面的考虑,一些卤系阻燃剂被逐渐淘汰,磷系阻燃剂作为卤系阻燃剂的替代品备受关注。然而,高效的磷系阻燃剂通常会在提高阻燃性能的同时产生更多的烟雾,因此需要与协效剂搭配使用。本文介绍了磷系阻燃剂在环氧树脂中的阻燃机理,综述了环氧树脂中磷系阻燃剂的协效体系的研究进展,包括无机协效剂、有机协效剂及有机-无机杂化协效剂等,并对环氧树脂体系中磷系阻燃剂的协效体系的未来发展趋势进行了展望。     

Construction and application of carbon nanotube/polypyrrole-based bacterial surface imprinted sensorEI北大核心CSCD

A simple and fast "non-hole" bacteria surface imprinted (SPBIP) impedance sensor was constructed for ultrasensitive detection of Salmonella. The SPBIP sensor was prepared by one step electropolymerization of pyrrole (functional monomer), single-walled carbon nanotube (SWNT, nano-modulator), and Salmonella(template) onto a glassy carbon electrode. After removing the bacterial template, "non-hole" imprinted sites were formed on the surface of the polymer matrix, allowing the target bacteria to be specifically recognized. The resulting changes in the electrode surface impedance could be used to detect the target bacteria. The effects of the amount of SWNT, polymerization cycles, eluents, elution time and recognition time on the recognition ability of the sensor were investigated. Under the optimal conditions, the sensor could be used to detect 10~1×107 CFU/mLSalmonella with the limit of detection of 3.5 CFU/mL. The sensor could be used for the detection of salmonella in drinking water and orange juice samples with the recoveries ranging from 95.4% to 109.5%. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

催化光度法时间程序测定土壤中痕量碘

碘是评价环境的重要元素之一,是地球化学勘察样品常测元素。本实验建立了艾斯卡试剂分解-热水提取样品,催化分光光度法时间程序测定碘的方法。详细讨论了艾斯卡试剂手工制作与行星球磨机制作的利弊;;参比液的选择;17℃-25℃不同环境温度条件对实验结果的影响;全程序空白溶液,与36g/L的碳酸钠溶液两种方法制作标准曲线及标准曲线线性范围;样品烧结时间及温度;乙酸用量对样品测试吸光度的影响。结果表明：利用行星球磨机制作艾斯卡试剂,选择试剂空白为参比液,在19℃的恒温环境下,采用36g/L的碳酸钠溶液制作0-8ug/mL标准曲线,样品采用0-300℃、300-500℃、500-750℃三阶段升温,750℃保持30min的烧结程序,乙酸用量为5mL时可以得到可靠的结果。该方法克服了艾斯卡试剂制作困难、样品烧结结块及实验反应速率过快等困难。通过方法学考察表明：基于所建方法碘元素校准曲线系数＞0.999;方法检出限为0.2 mg/kg;测定GSS36、GSS37、GSS38、GSS40、GSS47、GSS48、GSS49等9种国家一级标准物质,结果均在参考值范围内,相对标准偏差RSD＜5%。该方法测定的结果准确度及精密度高、 检出限低、减少碘记忆效应的存在,适用于地球化学勘察土壤样品中碘的测定。     

钴镁铝类水滑石液相选择性催化苯甲醇氧化合成苯甲醛

采用共沉淀法制备了不同Co₂AlMg_x(x=0.5、1、1.5和2)原子比的类水滑石,用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外光谱(FT-IR)、表面孔吸附(BET)及电感耦合等离子光谱(ICP)等技术手段表征了催化剂的结构、组成和比表面积,并考察了其催化苯甲醇选择氧化制苯甲醛的性能。 结果表明,随着Mg含量的增加,催化剂的碱性增强,苯甲醛的选择性提高。 在优化条件:苯甲醇0.02 mol,催化剂Co₂AlMg₁类水滑石100 mg,过氧化氢叔丁醇0.04 mol,溶剂乙腈8 mL,反应温度60 ℃,反应时间9 h下,苯甲醇的转化率为39.5%,苯甲醛的选择性达到89.2%。 催化剂重复使用5次后其活性与选择性未见明显降低,表明催化剂具有较好的稳定性。