复杂载荷作用下圆柱壳的弹塑性动力屈曲研究

对复杂载荷作用下圆柱壳的弹塑性动力屈曲问题进行了研究。基于Hamilton变分原理导出圆柱壳的运动方程 ,本构关系采用增量理论 ,借助增量数值算法求解动力方程组。结果表明 ,均匀径向外压对圆柱壳的轴向冲击的过程或冲击性态有较大的影响 ,并讨论了径向压力与轴向冲击载荷的幅值对结构临界动力屈曲载荷和临界动力失效载荷的影响。     

延误休假且修理延迟的可修系统的更换策略

研究了修理工多重延误休假且修理延迟的可修系统,假设系统故障后均不能"修复如新",系统在准备休假期间故障的概率为q,系统延迟修理的概率为1-P,以系统故障次数为更换策略,运用更新过程和几何过程理论,得出系统长期运行单位时间内平均停机时间的表达式,并通过数值例子验证了存在最优策略,使得平均停机时间最短.     

Intercomparison of techniques for estimation of sedimentation rate in the Sabah and Sarawak coastal waters

A total of eight sediment cores with 50 cm length were taken in the Sabah and Sarawak coastal waters using a gravity corer in 2004 to estimate sedimentation rates using four mathematical models of CIC, Shukla-CIC, CRS and ADE. The average of sedimentation rate ranged from 0.24 to 0.48 cm year^?1, which is calculated based on the vertical profile of ²¹⁰Pb_ex in sediment core. The finding also showed that the sedimentation rates derived from four models were generally shown in good agreement with similar or comparable value at some stations. However, based on statistical analysis of paired sample t-test indicated that CIC model was the most accurate, reliable and suitable technique to determine the sedimentation rate in the coastal area.     

Radioactivity of plutonium isotopes, <Superscript>137</Superscript>Cs and their ratio in sediment,seawater and biota from the east coast of Peninsular Malaysia

This study with sampling expeditions of marine sediment, seawater and biota were performed at 30 stations within Malaysian Exclusive Economic Zone (EEZ). A total of >400 samples were collected to determine the activity concentration of anthropogenic radionuclides (^239+240Pu, ¹³⁷Cs) and their activity ratio (^239+240Pu/¹³⁷Cs) in sediments, seawater and biota. The purpose of this study was to determine the concentration levels for these radionuclides and to evaluate any occurrence of radioactive contamination. Sediment cores were obtained using multicorer device, while water samples via co-precipitation techniques and biota was purchased from local fishermen. The activity concentrations of ^239+240Pu in sediment, seawater and biota were ranged 0.21–0.45 Bq/kg dry wt., 2.33–7.95 mBq/m³ and <0.008 Bq/kg fresh wt., respectively. Meanwhile, the values of ¹³⁷Cs were ranged <1.00–2.71 Bq/kg dry wt. in sediment, 3.40–5.89 Bq/m³ in seawater and <0.05–0.41 Bq/kg fresh wt. in biota, respectively. Activity ratios of ^239+240Pu to ¹³⁷Cs obtained seem to confirm that these artificial radioactivities were mainly due to global nuclear fallout.     

Sedimentation rate in the Sungai Linggi estuary using excess 210Pb and 137Cs

The purpose of this study was to estimate the sedimentation rate in the Sungai Linggi estuary using the constant initial concentration of unsupported or excess ²¹⁰Pb model and verified with ¹³⁷Cs method. Five sediment cores were collected on 25 January 2011 using gravity corer with the inner tube of 50 cm length and 7.5 cm diameter. The total ²¹⁰Pb activities in the sediment cores profile at all sampling stations were varied and upper than those obtained for supported ²¹⁰Pb i.e. ²²⁶Ra, indicated disequilibrium among ²¹⁰Pb and its grandparents in the ²³⁸U decay series. Meanwhile, the lower ¹³⁷Cs activities were observed at all sampling stations due to no significant sources of ¹³⁷Cs releases were transferred into Malaysian marine. The estimation of sedimentation rate indicated the agreement of ²¹⁰Pb and ¹³⁷Cs method with a general presence of deep mixing in the Sungai Linggi estuary. Therefore, the apparent sedimentation rates calculated from ²¹⁰Pb profiles generally reflect the true value with the range from 0.70 to 1.97 cmyr^?1. High sedimentation rate was observed at some sampling stations which are located in river channel, estuary and closer to mainland. This suggested that land-use development, agriculture activities, channelization etc. introduced a large amount of sediment loaded into those areas.     

An evaluation of a 3D free‐energy‐based lattice Boltzmann model for multiphase flows with large density ratio

In this paper, the 3D Navier–Stokes (N–S) equation and Cahn–Hilliard (C–H) equations were solved using a free‐energy‐based lattice Boltzmann (LB) model. In this model, a LB equation with a D3Q19 velocity model is used to recover continuity and N–S equations while another LB equation with D3Q7 velocity model for solving C–H equation (Int. J. Numer. Meth. Fluids, 2008; 56 :1653–1671) is applied to solve the 3D C–H equation. To avoid the excessive use of computational resources, a moving reference frame is adopted to allow long‐time simulation of a bubble rising. How to handle the inlet/outlet and moving‐wall boundary conditions are suggested. These boundary conditions are simple and easy for implementation. This model's performance on two‐phase flows was investigated and the mass conservation of this model was evaluated. The model is validated by its application to simulate the 3D air bubble rising in viscous liquid (density ratio is 1000). Good agreement was obtained between the present numerical results and experimental results when Re is small. However, for high‐Re cases, the mass conservation seems not so good as the low‐Re case. Copyright © 2009 John Wiley & Sons, Ltd.     

流动注射在线过滤稀释原子吸收法测定诺氟沙星

提出了流动注射在线过滤稀释原子吸收法测定诺氟沙星的新方法。药物浓度在0．1－0．8mg/mL范围符合比耳定律，回收率为97．9％－102．4％，相对标准偏差为1．7％。方法可用于诺氟沙星胶囊测定。     

流动注射在线过滤稀释原子吸收测定药物制剂中安乃近的方法研究

提出了测定安乃近的FI-AAS分析新方法。此法基于在适当酸度条件下安乃近将Cu^2 还原为Cu^ ，新生成的Cu^ 与SCN^-生成沉淀，经流动注射在线过滤稀释，以AAS法测定反应剩余Cu^2 的量来间接测定安乃近的含量。安乃近的浓度在2-100mg/L范围内吸收值呈良好的线性关系。回收率为97.0%-102.5%，采样频率为100次/h。     

FREE DEFORMATION RETRACTION IN INJECTIVE METRIC SPACES

In this paper the authors establish the concept of generalized ball-intersection (GBI) and prove that an injective metric space is freely contractible to its each GBI, which generalizes a result of Isbell from a point to a GBI.     

内陷在C_(60)中的氢原子的性质

在短程球形势阱的模型下 ,运用线性变分法并采用B 样条作为展开基函数计算了内陷于C60 几何中心的氢原子能谱和波函数 ,并计算了势阱深度对能谱的影响 ,详细讨论了内陷氢原子表现出的一系列特殊性质 ,从而对低维半导体材料性能的研究提供了有效的数据 ;同时这一工作也表明 ,用线性变分法结合B 样条函数在处理这类问题时是非常有效的。