排序方式: 共有63条查询结果,搜索用时 15 毫秒
1.
2.
近代洞庭湖沉积与孕灾环境研究 总被引:4,自引:0,他引:4
通过对洞庭湖区不同沉积部位的22个钻孔取样和^210Pb放射性同位素测年分析,洞庭湖有较高的沉积速率,最高可达2.33cm/a,不同的沉积部位沉积速率也有较大的差异。由于19世纪以来四口分流形成,大量长江的泥沙进入洞庭湖,近50年的水文资料表明,洞庭湖83%的泥沙淤积来源于长江。由于人类围垦、上游森林砍伐和洲滩堤坝的逐年加高,洞庭湖水面减少了2/3,洞庭湖对长江洪水的调蓄能力已迅速减弱。洞庭湖的演变变化过程直接影响到长江中游的生态安全。 相似文献
3.
红外反射及红外—光声光谱法对青铜生锈过程的研究 总被引:2,自引:0,他引:2
在自制Cu-Sn-Pb合金表面上进行盐酸腐蚀,用红外反射及红外-光声光谱方法监测粉状锈(Cu_2(OH)_3Cl)的生长过程。结果发现,在酸性环境中Cu_2(OH)_3Cl生长迅速;二价铜锈的生成需通过一价铜锈(CuCl)这一中间产物;粉状锈有传染性,可通过空气由锈蚀样品传至无锈样品,锈体颗粒对光线的散射作用强,结合热力学计算对青铜生锈机理进行了探索。 相似文献
4.
A series of Mo-impregnated Hβ samples, with MoO3 loading in Hβ zeolite in the mass fraction range of 0. 5%-6.0%, were studied by means of XRD and IR in order to characterize their structures. Mo/Hβ sampies‘ crystallinity almost linearly decreases with increasing the amount of MoO3 loaded, The IR spectra and XRD patterns suggest that the progressive destabilization of the Hβ zeolite structure is caused by increasing Mo loading in (MoO3 Hβ zeolite). During the calcination, Al2(MoO4)3 formed from the dealumination of Hβ zeolite, causes the substantially partial breakdown of the zeolite framework when the Mo loading in MoO3 Hβ is relatively high. 相似文献
5.
以不同浓度的H2SO4对膨润土进行改性,得到酸化膨润土催化剂x%H2SO4-BN(x=20,25,30,35,40),通过XRD,BET,FT-IR,Py-IR和NH3-TPD对膨润土的结构和性质进行表征,证明膨润土经酸化后,骨架结构基本没有变化,但是其比表面和孔容有很大的提高,且弱酸位增多.将其用于催化乙醇(EtOH)和叔丁醇(TBA)合成乙基叔丁基醚(ETBE)的醚化反应.结果表明,30%H2SO4-BN催化活性最好,最佳实验条件:催化剂用量为3.5%(催化剂与叔丁醇的质量百分比),反应温度130℃,原料摩尔比(EtOH:TBA)为2∶1. 相似文献
6.
7.
基于LCVR调谐的全偏振多谱段成像系统 总被引:2,自引:0,他引:2
提出一种新型全偏振多谱段成像系统,将液晶相位可变延迟器LCVR应用于全偏振成像技术,在可见-近红外波段上可快速实现光的全偏振态的精确调制.系统由光学镜头、LCVR、偏振片、滤波片和CCD探测器组成.文章首先介绍了系统结构、工作原理和光学设计,并提出了适合本系统的偏振定标方法,建立了偏振定标系统,实现了利用较小面积的偏振... 相似文献
8.
介绍一种计算随机变量数学期望的方法,利用这种方法容易得到数学期望的相关性质,很多概率与矩的不等式证明也因之变得更为简洁. 相似文献
9.
从EAST 装置2016 年的放电实验中,选取了119 次等离子体破裂放电数据,分析诱发等离子体破裂的原因,发现约60%的破裂是由垂直不稳定性直接引起的,其破裂后将会产生更大的晕电流,从而产生更大的电磁应力损坏装置。对由垂直不稳定性引起的破裂(简称为VID)(72 次放电)进行了研究,建立了分别基于单变量(垂直位移)和两维变量(垂直位移、垂直位移增长率)的预测模型用于对VID 破裂的预测。离线测试表明,基于两维变量的预测模型可以在破裂发生前20ms 给出破裂预警信号,预测成功率达93%。 相似文献
10.
A series of 3. 0Mo/(Hβ γ-Al2O3) samples with γ-Al2O3 contents in the range of 0-100% (mass fraction) was studied by means of XRD, NH3-TPD, TPR and BET determinations for characterizing their structures. The Hβ zeolite structure in the 3. 0Mo/Hβ sample can be effectively stabilized by adding some γ-Al2O3to Hβ zeolite. γ-Al2O3 mainly favors the formation of polymolybdate or multilayered Mo oxide, while Hβmainly forms the Al2(MoO4)3 species, as evaluated by the TPR technique. When used as the catalyst for the metathesis of butylene-2 and ethylene to propylene, there exists a close correlation between the specific surface area and stability of the catalyst. The specific surface area of the catalyst shows the maximum when (Hβ γ-Al2O3) contains 30%γ-Al2O3, which is in agreement with that of the time needed for the reaction stablization. In the case of maximum surface area, the rate of coke deposition is the minimum. 相似文献