Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation

Instrumented indentation tests using both constant loading rate (CLR) and continuous stiffness measurement (CSM) operation modes were performed to investigate the deformation mechanism and their sensitivity to the deformation rate in semi-crystalline polymers through the quantitative analysis of load-depth loading and unloading curves. The strain rate was constant during the CSM tests, while the strain rate decreased with the increasing of loading time in CLR tests. The mechanical response mechanism of the semi-crystalline polymers to these tests was very complicated because of the combined effects of strain-hardening in the crystal phase and strain-softening in the amorphous phase. Results show that the loading index m reflects the strain-hardening or strain-softening response during indentation. When m > 2, the mechanical response was due to the strain-hardening, and when m < 2, the response was due to strain-softening. A method based on the measured contact hardness was proposed to obtain the unloading stiffness, and the other mechanical parameters could then be determined according to the unloading stiffness.     

Dependence of the Elastic Properties of H5-Chondrites (NWA 12370) on Pressure

Doklady Physics - The mechanical properties of NWA 12370 chondrite, petrological type H5, depending on the external hydrostatic pressure were studied using ultrasonic waves. This meteorite is a...     

Natural Cellulose Substance Based Energy Materials

Natural cellulose substances have been proven to be ideal structural templates and scaffolds for the fabrication of artificial functional materials with designed structures, psychochemical properties and functionalities. They possess unique hierarchically porous network structures with flexible, biocompatible, and environmental characteristics, exhibiting great potentials in the preparation of energy-related materials. This minireview summarizes natural cellulose-based materials that are used in batteries, supercapacitors, photocatalytic hydrogen generation, photoelectrochemical cells, and solar cells. When natural cellulose substances are employed as the structural template or carbon sources of energy materials, the three-dimensional porous interwoven structures are perfectly replicated, leading to the enhanced performances of the resultant materials. Benefiting from the mechanical strengths of natural cellulose substances, wearable, portable, free-standing, and flexible materials for energy storage and conversion are easily obtained by using natural cellulose substances as the substrates.     

Inverse colloidal crystal membranes for hydrophobic interaction membrane chromatography

Hydrophobic interaction membrane chromatography has gained interest due to its excellent performance in the purification of humanized monoclonal antibodies. The membrane material used in hydrophobic interaction membrane chromatography has typically been commercially available polyvinylidene fluoride. In this contribution, newly developed inverse colloidal crystal membranes that have uniform pores, high porosity and, therefore, high surface area for protein binding are used as hydrophobic interaction membrane chromatography membranes for humanized monoclonal antibody immunoglobulin G purification. The capacity of the inverse colloidal crystal membranes developed here is up to ten times greater than commercially available polyvinylidene fluoride membranes with a similar pore size. This work highlights the importance of developing uniform pore size high porosity membranes in order to maximize the capacity of hydrophobic interaction membrane chromatography.     

聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)的制备与性能

采用熔融酯交换和缩聚两步法,合成了以1,4-丁二醇、4,8-三环[5.2.1.0(2,6)]癸烷二甲醇和碳酸二苯酯为原料的聚(碳酸丁二醇酯-co-三环癸烷二甲醇碳酸酯)(PBTCx, x为进料中TCD占二元醇总量的百分比)。用1H NMR和13C NMR对PBTCs的微观结构和组成进行了表征。采用GPC、 DSC、 XRD、 TG对PBTCs的分子量、玻璃化转变温度(Tg)、热稳定性等进行了研究。结果表明,PBTCs的Mw为10500~124800 g?mol-1, Mn为6300~73000 g?mol-1, PDI为1.59~1.73; PBTCs呈无定形态、Tg为-3.43 ℃~70.90 ℃, PBTCs表现出比PBC更高的热稳定性。薄膜拉伸试验结果表明,PBTC30(拉伸强度为33.54 MPa,断裂伸长率为275.69%)和PBTC40(拉伸强度为32.13 MPa,断裂伸长率为294.63%)具有较高的强度和韧性,在薄膜材料中具有一定的应用潜力。