Effect of furan π-bridge on the photovoltaic performance of D-A copolymers based on bi(alkylthio-thienyl)benzodithiophene and fluorobenzotriazole

The medium band gap donor-acceptor(D-A) copolymer J61 based on bi(alkylthio-thienyl)benzodithiophene as donor unit and fluorobenzotriazole as acceptor unit and thiophene as π-bridge has demonstrated excellent photovoltaic performance as donor material in nonfullerene polymer solar cells(PSCs) with narrow bandgap n-type organic semiconductor ITIC as acceptor.For studying the effect of π-bridges on the photovoltaic performance of the D-A copolymers,here we synthesized a new D-A copolymer J61-F based on the same donor and acceptor units as J61 but with furan π-bridges instead of thiophene.J61-F possesses a deeper the highest occupied molecular orbital(HOMO) level at-5.45 eV in comparison with that(-5.32 eV) of J61.The non-fullerene PSCs based on J61-F:ITIC exhibited a maximum power conversion efficiency(PCE) of 8.24%with a higher open-circuit voltage(V_(oc)) of 0.95 V,which is benefitted from the lower-lying HOMO energy level of J61-F donor material.The results indicate that main chain engineering by changing π-bridges is another effective way to tune the electronic energy levels of the conjugated D-A copolymers for the application as donor materials in non-fullerene PSCs.     

Dual-Atom Catalysts Derived from a Preorganized Covalent Organic Framework for Enhanced Electrochemical Oxygen Reduction

Dual-atom catalysts (DAC) are deemed as promising electrocatalysts due to the abundant active sites and adjustable electronic structure, but the fabrication of well-defined DAC is still full of challenges. Herein, bonded Fe dual-atom catalysts (Fe₂DAC) with Fe₂N₆C₈O₂ configuration were developed through one-step carbonization of a preorganized covalent organic framework with bimetallic Fe chelation sites (Fe₂COF). The transition from Fe₂COF to Fe₂DAC involved the dissociation of the nanoparticles and the capture of atoms by carbon defects. Benefitting from the optimized d-band center and enhanced adsorption of OOH* intermediates, Fe₂DAC exhibited outstanding oxygen reduction activity with a half-wave potential of 0.898 V vs. RHE. This work will guide more fabrication of dual-atom and even cluster catalysts from preorganized COF in the future.     

Syntheses,Crystal Structures and Properties of Mn(Ⅱ) and Co(Ⅱ) Coordination Complexes Based on 1,10-Phenanthroline Derivative

Two new coordination complexes[Mn(L)₂(DNSA)](1) and[Co(L)(1,4-bdc)]_n (2) have been achieved under hydrothermal conditions (H₂DNSA=3,5-dinitro-salicylic acid,1,4-bdc=1,4-benzenedicarboxylic acid and L=2-(2-fluoro-6-fluorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline).1 crystallizes in monoclinic,space group P2_1/c with a=15.871(3),b=17.274(4),c=16.078(3)A,β=113.03(3)^o,V=4056.6(16)A³,Z=4,C₄₅H₂₂Cl₂F₂Mn N₁₀O₇,M_r=978.57,D_c=1.602 g/cm³,F(000)=1980,μ(Mo Ka)=0.536 mm^–1,R=0.0437 and w R=0.1065.2 belongs to the monoclinic system,space group C2/c with a=14.665(2),b=30.856(4),c=11.237(2)A,β=111.166(2)^o,V=4742.0(12)A³,Z=8,C₂₇H₁₄Cl Co FN₄O₄,M_r=517.80,D_c=1.602 g/cm³,F(000)=2312,μ(Mo Ka)=0.889 mm^–1,R=0.0364 and w R=0.0862.The central Mn(II) ion in 1 is six-coordinated by four nitrogen atoms from two L ligands and two oxygen atoms from one DNSA anion.In 2,the two kinds of 1,4-bdc ligands link neighboring Co(II) atoms to yield a two-dimensional layer structure.The luminescence of 1 has been studied in detail.Moreover,thermal behaviors of 1 and 2 are also investigated.     

Benzotriazole Based 2D-conjugated Polymer Donors for High Performance Polymer Solar Cells

To design high efficiency polymer solar cells(PSCs), it is of great importance to develop suitable polymer donors that work well with the low bandgap acceptors, providing complementary absorption, forming interpenetrating networks in the active layers and minimizing energy loss. Recently, we developed a series of two-dimension-conjugated polymers based on bithienylbenzodithiophene-alt-benzotriazole backbone bearing different conjugated side chains, generally called J-series polymers. They are medium energy bandgap(Eg) polymers(Eg of ca. 1.80 eV)with strong absorptions in the range of 400-650 nm, and exhibit ordered crystalline structures, high hole mobilities, and more interestingly,tunable energy levels depending on the structure variations. In this feature article, we highlight our recent efforts on the design and synthesis of those J-series polymer donors, including an introduction on the polymer design strategy and emphasis on the crucial function of differential conjugated side chain. Finally, the future opportunities and challenges of the J-series polymers in PSCs are discussed.     

钙钛矿锰氧化物(La1-xGdx)4/3Sr5/3Mn2O7 (x=0, 0.025) 磁性和输运性质研究

采用传统的高温固相烧结法制备了双层钙钛矿锰氧化物(La_1-xGd_x)_4/3Sr_5/3Mn₂ O₇ (x=0, 0.025)多晶样品. 通过X射线衍射仪研究发现样品为Sr₃Ti₂O₇型四方结构, 空间群为I4/mmm; 磁性测量表明, Gd³⁺掺杂后的样品(La_0.975Gd_0.025)_4/3Sr_5/3Mn₂O₇的三维磁有序转变温度(T_C1^3D)、磁化强度(M)均降低, 这是由于Gd³⁺的掺杂引起晶格的畸变, 从而使得晶格常数发生改变, 减弱了铁磁耦合而导致的; 通过电子自旋共振谱测量发现, 在T_C^3D<T<300 K温度范围内, 两样品在顺磁的基体上均有短程的铁磁团簇存在, 出现了相分离现象. 电性测量表明: 两样品分别在T_C1^3D (La_4/3Sr_5/3Mn₂O₇ 样品的三维磁有序转变温度, T_C0^3D)<T<300 K温度范围内均以三维变程跳跃的方式导电, 分析得出Gd³⁺的掺杂使得载流子局域长度的减小. 这表明载流子需要吸收更多的能量才能克服晶格的束缚进行跳跃, 因此(La_0.975Gd_0.025)_4/3Sr_5/3Mn₂ O₇ 样品的电阻较高.     

Synthesis, Structure and Photoluminescence of a New Cd(Ⅱ)Coordination Polymer Based on 4-(Carboxymethoxy)-benzoic Acid and 1,10-Phenanthroline Derivative

A new 1D coordination polymer, [Cd2(L1)2(L2)2]·H2O (1, H2L1 = 4-(carboxy-methoxy)benzoic acid and L2 = 2-(4-fluorophenyl)-1H-imidazo[4,5-f][1,10]phenanthroline), has been hydrothermally synthesized and characterized by elemental analysis and single-crystal X-ray diffraction. It crystallizes in triclinic, space group Pī with a = 9.985(5), b = 10.768(5), c = 12.512(5), α = 68.959(5), β = 80.354(5), γ = 79.663(5)°, V = 1227.4(10) 3, Z = 1, C56H36Cd2F2N8O11, Mr = 1259.73, Dc = 1.704 g/cm3, F(000) = 630, μ(MoKa) = 0.949 mm-1, R = 0.0261 and wR = 0.0655. The L1 anions link the neighboring Cd(II) atoms to form a 1D double chain structure. The L2 ligands are alternately located on both sides of the double chains. More interestingly, the lateral L2 ligands from adjacent double chains are paired to furnish strong π-π interactions, yielding a 2D supramolecular layer. N-H···O, O-H···N and O-H···O hydrogen bonds further stabilize the structure of 1. The luminescent property of 1 was studied in solid state at room temperature.     

Porous monoliths: sorbents for miniaturized extraction in biological analysis

In this review the focus is on application of porous monoliths to miniaturized extraction of biological analysis, with emphasis on porous monolithic materials and different miniaturized extraction formats. The general approaches used to synthesize organic polymer and silica monolithic materials are highlighted, and their properties and applicability are described and compared. Several extraction formats, including in-tube microextraction, chip-based microextraction, tip-based microextraction, among others, are reviewed in depth.     

香菇生物质基氮掺杂微孔碳材料的制备及其在超级电容器中的应用

采用简易浸泡法和一步碳化/活化法制备香菇生物质基氮掺杂微孔碳材料(NMCs),利用扫描电子显微镜(SEM)、透射电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)对材料的结构形貌进行表征,并研究了其超级电容特性。测试结果表明,NMCs的微孔比表面积高达1 594 m~2·g~(-1),且拥有更高数量的含氮官能团,其吡啶型含氮官能团比例也有所提高,展现出优异的超级电容特性。在0.5 A·g~(-1)的电流密度下,其比容量高达325 F·g~(-1),当电流密度上升到20 A·g~(-1)时,其比电容仍然高达180 F·g~(-1),表现出优异的倍率性能;同时,在5 A·g~(-1)的电流密度下,电极经历5 000次充放电循环后具有97.7%的比容量保持率,展现出优异的循环稳定性。这主要归因于NMCs超高的微孔比表面积和丰富的含氮官能团。     

A green strategy for lithium isotopes separation by using mesoporous silica materials doped with ionic liquids and benzo-15-crown-5

Three new mesoporous silica materials IL15SGs (HF15SG, TF15SG and DF15SG) doped with benzo-15-crown-5 and imidazolium based ionic liquids (C₈mim⁺PF₆ ^?, C₈mim⁺BF₄ ^? or C₈mim⁺NTf ₂ ^? ) have been prepared by a simple approach to separating lithium isotopes. The formed mesoporous structures of silica gels have been confirmed by transmission electron microscopy image and N₂ gas adsorption–desorption isotherm. Imidazolium ionic liquids acted as templates to prepare mesoporous materials, additives to stabilize extractant within silica gel, and synergetic agents to separate the lithium isotopes. Factors such as lithium salt concentration, initial pH, counter anion of lithium salt, extraction time, and temperature on the lithium isotopes separation were examined. Under optimized conditions, the extraction efficiency of HF15SG, TF15SG and DF15SG were found to be 11.43, 10.59 and 13.07 %, respectively. The heavier isotope ⁷Li was concentrated in the solution phase while the lighter isotope ⁶Li was enriched in the gel phase. The solid–liquid extraction maximum single-stage isotopes separation factor of ⁶Li–⁷Li in the solid–liquid extraction was up to 1.046 ± 0.002. X-ray crystal structure analysis indicated that the lithium salt was extracted into the solid phase with crown ether forming [(Li_0.5)₂(B15)₂(H₂O)]⁺ complexes. IL15SGs were also easily regenerated by stripping with 20 mmol L^?1 HCl and reused in the consecutive removal of lithium ion in five cycles.