Comparison of 17beta-estradiol structures from x-ray diffraction and solution NMR

The NMR-derived structure of estrogen (17beta-estradiol, E2), the drug of choice for postmenopausal women, was compared with a recent literature crystal x-ray structure of Fab-bound E2. 1H and 13C NMR spectra of E2 were acquired in DMSO-d6. Assignments were obtained from an analysis of DQF-COSY, TOCSY, HETCOR, HMQC and HMBC 2D NMR spectra. The 1H and 13C NMR assignments are the first reported for E2 in DMSO-d6. Two solution structures, S1 and S2, were obtained with molecular modeling using NOE constraints. S1 overlaps with the crystal structure for all rings. S2 shows prominent differences in the C-ring (C9--C11--C12--C13) segment, which deviates from a chair conformation, and excellent overlap in the A-, B- and D-rings of E2. The C-ring in S2 adopts a boat conformation as opposed to a chair conformation in the x-ray and S1 structures. The S2 structure is about 6 degrees more twisted than the bound x-ray and S1 models. The S1, S2 and x-ray structures had ring bowing values of 10.1 +/- 0.3, 11 +/- 1 and 10.37 degrees , respectively. Of the 100 solution conformers generated, 83 had S1 conformation and 17 had S2 conformation, with average internal energies of 112 +/- 2 and 141 +/- 2 kcal mol(-1), respectively. The 100 S1- and S2- derived conformers showed a r.m.s.d. of 0.72 A for all atoms. The x-ray, S1 and S2 C18--O17 distances were 2.93, 2.92 +/- 0.01 and 2.93 +/- 0.01 A, respectively, and the O3--O17 distances were 11.06, 11.18 +/- 0.12, and 10.89 +/- 0.05 A, respectively.     

Intrinsic and Intramolecular Lipophilicity Effects in O-Glucuronides

In this study, we compared the lipophilicity of O-glucuronides and their aglycones. Distribution coefficients (log D) and P values of neutral species (log P) were determined by centrifugal partition chromatography (CPC) in octanol/buffer systems. Two-phase potentiometry was also used to measure the log P value of some lipophilic solutes. The experimentally determined global influence of glucuronidation on lipophilicity, obtained as the difference (decrement) log P_{(glucuronide)} ? log P_(aglycone), was found to be ?1.30 ± 0.16 (n = 4) for glucuronides of alcohols (methyl, menthyl, neomenthyl, and chloramphenicol O-glucuronide). The mean decrement was ?2.06 ± 0.31 (n = 9) for glucuronides of phenols (phenyl, p-nitrophenyl, 1-naphthyl, 6-bromo-2-naphthyl, 4-methylumbelliferyl, 3-coumarinyl, phenolphthalein, 4′-benzophenonyl O-glucuronide, and diflunisal phenolic glucuronide). For the acylglucuronide of diflunisal and its rearrangement isomers, the mean decrement was ?1.80 ± 0.08 (n = 4; range ?1.7 to ?1.9). Differences in through-bond proximity effects as parametrized in the CLOGP algorithm seem to account for much of this difference. Conformational factors may also play a role, although it appears modest and unassessable for the glucuronides investigated here. The results imply that in vivo glucuronidation should have a stronger influence on the excretion of phenols than on that of alcohols.     

Separation strategy for acidic chiral pharmaceuticals with capillary electrochromatography on polysaccharide stationary phases

The effect of five factors on the capillary electrochromatographic enantioseparation of acidic compounds was studied using an experimental design. The studied factors were pH, acetonitrile content in the mobile phase, temperature, buffer concentration, and applied voltage. These experiments allowed defining a generic separation strategy applicable on acidic compounds with chemical and structural diversity. The starting screening conditions consist of a 45 mM ammonium formate electrolyte at pH 2.9 mixed with 65% acetonitrile, an applied voltage of 15 kV, and a temperature of 25 degrees C. The screening phase occasionally can be followed by an optimization procedure. Evaluation of the proposed strategy pointed out that it allows achieving baseline resolution within a relatively short time when a beginning of separation is obtained at the starting conditions. This strategy revealed enantioselectivity for 11 compounds out of 15, of which 10 could be baseline-separated after the proposed optimization steps.     

Rhodium(II)-Catalyzed CH Insertions with {[(4-Nitrophenyl)sulfonyl]imino}phenyl-λ3-iodane

The [Rh₂(OAc)₄]-catalyzed decomposition of {[(4-nitrophenyl)sulfonyl]imino}phenyl-λ³-iodane (NsN?IPh) resulted in formal insertions into CH bonds, activated by phenyl or vinyl groups, or by O-substituents. Scope and limitations of the reaction were investigated. Yields of up to 84% were achieved in the most favorable cases. Yields were enhanced by electron-releasing substituents and decreased by steric hindrance. Aziridination competed with allylic insertion with olefinic substrates. The insertion reaction proceeded with retention of configuration. With chiral Rh^II catalysts, a modest asymmetric induction was observed. A mechanism involving direct insertion by a Rh-complexed nitrene into the CH bond is proposed.     

Minimal number of chromatographic test parameters for the characterisation of reversed-phase liquid chromatographic stationary phases

This paper focuses on the classification or differentiation of RP-HPLC columns based on measured chromatographic properties. A chemometric study has been conducted on a published data set consisting of 85 RP-HPLC columns and on a data set consisting of 47 self-tested columns. Principal component analysis enables determination of the number of parameters necessary for a rational differentiation. The results show that reducing the number of parameters for such differentiation still allows classification of the columns just as a higher number did. It is shown that three test parameters produce a classification similar to that obtained with five parameters.     

Configuration-Odor Relationships in 5β-Ambrox

The four possible A/B cis-fused diastereoisomers of Ambrox® have been synthesized and their configurations and conformations established by X-ray and NMR analysis. Only 5β-ambrox (= 1,2,3a,4,5,5β,6,7,8,9,9a,9bα-dodecahydro-3aβ,6,6,9aβ-tetramethylnaphtho[2,1-b]furan; 5 ) has an odor quality comparable to Ambrox®. The 1,3-synperiplanar/diaxial conformation of the substituents at C(8) ( = C(3a)) and C(10) (= C(9a)) has thus been confirmed to be a compulsory structure element for the particular odor.     

Influence of peak measurement parameters on the quality of chiral electrophoretic separations

The effect of nine peak measurement/analysis parameters on chiral capillary electrophoresis (CE), followed by UV detection, was studied. The parameters pertained UV-detection (detection wavelength, reference wavelength, and wavelength bandwidths), signal processing (data acquisition rate, type and amount of filtering) and peak detection (detection threshold and peak width). The influence of these factors on the chiral separation of dimethindene enantiomers was studied at two different concentrations (i.e., at high and low signal-to-noise (S/N) ratio) by the means of experimental designs. The electropherogram characteristics considered were the resolution between the two enantiomers, the peak areas, and the S/N ratio. A D-optimal design was first used as screening design to identify the most critical parameters. Afterwards, a modelling of the different responses as a function of these critical parameters was performed based on the results of a face-centered central composite design. The results showed that the signal-processing parameters should be carefully selected when developing a CE separation since very important variations in the separation, the S/N ratio and the peak area of the substances can occur by setting these parameters at different levels. The detection wavelength should also be carefully chosen for optimal peak area measurement. The role of these parameters becomes more important with decreasing concentration of the analytes (i.e., low S/N ratio). This study showed that the peak measurement/analysis parameters should be optimized as the chemical and physical parameters of a method. They also should always be well specified in order to allow a good transfer of a method from one instrument to another.     

Incipience of quantum chaos in the spin-boson model

The peculiar spectral properties of the spinboson model make it suitable for an investigation of quantum nonintegrability effects and level statistics from a new perspective. For fixed spin quantum numbers, its energy spectrum consists of 2s+1 sequences of levels with no upper bound. These sequences are identified and labelled consecutively by means of a quantum invariant calculated from the time average of a non-stationary operator. For integrable cases, level repulsion (on the energy axis) is limited to states within each sequence. From the observed spectral properties, we infer a series ofs-dependent level-spacing distributions. They converge towards a Poisson distribution fors. For nonintegrable cases, level repulsion becomes a universal phenomenon, but the amount of repulsion between two states decreases with increasing separation (in label) of the two sequences to which they belong. For smalls, the quantum nonintegrability effects are compelling but not at all chaotic. Nevertheless, they contain all the ingredients necessary to produce the symptoms commonly described as indicators of quantum chaos. In this model, we can observe quantum chaos in the making under very controllable conditions.     

Synthesis of 2,3-anti-3,4-anti and 2,3-anti-3,4-syn propionate motifs: a diastereoselective tandem sequence of Mukaiyama and free-radical-based hydrogen transfer reactions

[reaction: see text] Reported herein is a strategy employing a Mukaiyama reaction in tandem with a hydrogen transfer reaction for the elaboration of 2,3-anti-3,4-anti and 2,3-anti-3,4-syn propionate motifs. The mode of complexation is controlled through monodentate or chelate pathways for the Mukaiyama reaction to give access to either syn or anti aldol products, precursors of the free-radical reduction reaction. Boron Lewis acid is used to control the free-radical reaction through the exocyclic pathway.     

Enantioseparations by capillary electro-chromatography: differences exhibited by normal- and reversed-phase versions of polysaccharide stationary phases

The influence of using normal-phase and reversed-phase versions of four commercial polysaccharide stationary phases on chiral separations was investigated with capillary electrochromatography (CEC). Both versions of the stationary phases, Chiralcel OD, OJ, and Chiralpak AD, AS were tested for the separation of two basic, two acidic, a bifunctional, and a neutral compound. Different background electrolytes were used, two at low pH for the acid, bifunctional and neutral substances, and three at high pH for the basic, bifunctional and neutral ones. This setup allowed evaluating differences between both stationary-phase versions and between mobile-phase compositions on a chiral separation. Duplicate CEC columns of each stationary phase were in-house prepared and tested, giving information about the intercolumn reproducibility. In general, reversed-phase versions of the current commercial polysaccharide stationary phases are found to be best for reversed-phase CEC, even though at high pH no significant differences were seen between both versions. Most differences were observed at low pH. For acidic compounds, it was seen that an ammonium formate electrolyte performed best, which is also an excellent electrolyte if coupling with mass spectrometry is desired. For basic, bifunctional and neutral compounds, no significant differences between the three tested electrolytes were observed at high pH. Here, a phosphate buffer is preferred as electrolyte because of its buffering capacities. However, if coupling to mass spectrometry is wanted, the more volatile ammonium bicarbonate electrolyte can be used as an alternative.