Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels

This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.     

Synthesis of novel dendrimers containing pyrimidine units

A novel convergent approach to dendritic macromolecules is described in which 4,6-dichloro-2-(4-methoxyphenyl)-pyrimidine is used as the building block. The nucleophilic aromatic substitution reaction at this AB₂-monomer was used as the key step in the propagation of the dendrons. Different core reagents were used to form the dendrimers, including a 5,15-bis(pyrimidyl)porphyrin core. Fourth-generation dendrons and third-generation dendrimers could be synthesized. The presented dendrimers are promising candidates to be used in applications where a more rigid structure and a larger resistance towards the applied conditions is required.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

Structural aspects of antibody-antigen interaction revealed through small random peptide libraries

Summary Two small random peptide libraries, one composed of 4550 dodecapeptides and one of 8000 tripeptides, were synthesized in newly developed credit-card format miniPEPSCAN cards (miniPEPSCAN libraries). Each peptide was synthesized in a discrete well (455 peptides/card). The two miniPEPSCAN libraries were screened with three different monoclonal antibodies (Mabs). Two other random peptide libraries, expressed on the wall of bacteria (recombinant libraries) and composed of 10⁷ hexa- and octapeptides, were screened with the same three Mabs. The aim of this study was to compare the amino acid sequence of peptides selected from small and large pools of random peptides and, in this way, investigate the potential of small random peptide libraries. The screening of the two miniPEPSCAN libraries resulted in the identification of a surprisingly large number of antibody-binding peptides, while the screening of the large recombinant libraries, using the same Mabs, resulted in the identification of only a small number of peptides. The large number of peptides derived from the small random peptide libraries allowed the determination of consensus sequences. These consensus sequences could be related to small linear and nonlinear parts of the respective epitopes. The small number of peptides derived from the large random peptide libraries could only be related to linear epitopes that were previously mapped using small libraries of overlapping peptides covering the antigenic protein. Thus, with respect to the cost and speed of identifying peptides that resemble linear and nonlinear parts of epitopes, small diversity libraries based on synthetic peptides appear to be superior to large diversity libraries based on expression systems.Abbreviations ABTS 2,2-azino-di-3-ethylbenzthiazoline sulfonate - EGF epidermal growth factor - Mab monoclonal antibody - OD_ccd optical density obtained using CCD camera - RAMPO rabbit-antimouse peroxidase - SDS sodium dodecylsulfate - TGEV transmissible gastroenteritis virus     

A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications

Abstract

The outstanding performance of conventional thermosets arising from their covalently cross-linked networks directly results in a limited recyclability. The available commercial or close-to-commercial techniques facing this challenge can be divided into mechanical, thermal, and chemical processing. However, these methods typically require a high energy input and do not take the recycling of the thermoset matrix itself into account. Rather, they focus on retrieving the more valuable fibers, fillers, or substrates. To increase the circularity of thermoset products, many academic studies report potential solutions which require a reduced energy input by using degradable linkages or dynamic covalent bonds. However, the majority of these studies have limited potential for industrial implementation. This review aims to bridge the gap between the industrial and academic developments by focusing on those which are most relevant from a technological, sustainable and economic point of view. An overview is given of currently used approaches for the recycling of thermoset materials, the development of novel inherently recyclable thermosets and examples of possible applications that could reach the market in the near future.     

Homodiselenacalix[4]arenes: Molecules with Unique Channelled Crystal Structures

A synthetic route towards homodiselenacalix[4]arene macrocycles is presented, based on the dynamic covalent chemistry of diselenides. The calixarene inner rim is decorated with either alkoxy or tert‐butyl ester groups. Single‐crystal X‐ray analysis of two THF solvates with methoxy and ethoxy substituents reveals the high similarity of their molecular structures and alterations on the supramolecular level. In both crystal structures, solvent channels are present and differ in both shape and capacity. Furthermore, the methoxy‐substituted macrocycle undergoes a single‐crystal‐to‐single‐crystal transformation during which the molecular structure changes its conformation from 1,3‐alternate (loaded with THF/water) to 1,2‐alternate (apohost form). Molecular modelling techniques were applied to explore the conformational and energetic behaviour of the macrocycles.     

Detection challenges in quantitative polymer analysis by liquid chromatography

Accurate quantification of polymer distributions is one of the main challenges in polymer analysis by liquid chromatography. The response of contemporary detectors is typically influenced by compositional features such as molecular weight, chain composition, end groups, and branching. This renders the accurate quantification of complex polymers of which there are no standards available, extremely challenging. Moreover, any (programmed) change in mobile‐phase composition may further limit the applicability of detection techniques. Current methods often rely on refractive index detection, which is not accurate when dealing with complex samples as the refractive‐index increment is often unknown. We review current and emerging detection methods in liquid chromatography with the aim of identifying detectors, which can be applied to the quantitative analysis of complex polymers.     

Comments on the Implementation of a Simple Peak Capacity Optimization Procedure and Comparison of Poly(styrene–divinylbenzene) and RP-18 Silica Monolithic Capillary Columns of 5-cm for the Analysis of Protein Digests

For the analysis of protein digests, the peak capacity in reversed-phase liquid chromatography is of paramount importance. A univariate method to maximize the peak capacity as developed by Wang et al. (Anal Chem 78:3406–3416, 20) has been applied and tested for a monolithic RP-18 silica capillary column. In their method, using model peptides representing a bovine serum albumin digest, the gradient time and temperature are kept constant while the flow rate and eluent strength are varied. Despite our criticism on the fixed starting conditions, a long gradient time leading to an unnecessary long analysis time and a high temperature leading to possible degradation products in the chromatogram, and the peak capacity as the only optimization parameter this fast and simple optimization strategy turns out to be applicable to capillary monolithic columns. Furthermore, the influence of the peak capacity on a second optimization parameter, the MS protein identification score, is examined. The procedure is also used to enhance the performance of two popular types of monolithic capillary LC columns (silica-C18 and poly(styrene–divinylbenzene)) of the same length for the analysis of protein digests. Comparison of both columns show that the calculated chromatographic parameters, like productivity and peak capacity, and identification score for both columns are about the same. For a more complicated nine-protein digest the performance of the silica monolith is slightly better.     

Lewis Acid Mediated Vinyl‐Transfer Reaction of Alkynes to N‐Alkylimines by Using the N‐Alkyl Residue as a Sacrificial Hydrogen Donor

A variety of N‐alkyl‐α,α‐dichloroaldimines were vinylated by terminal acetylenes in the presence of Lewis acids such as In(OTf)₃ or BF₃ ? OEt₂ and hexafluoroisopropanol (HFIP) as an additive. The reaction proceeds at ambient temperature and leads to geometrically pure allylic β,β‐dichloroamines. This approach is complementary to previously reported transition‐metal‐catalyzed vinyl‐transfer methods, which are not applicable to aliphatic imines and are restricted to imines that contain an electron‐withdrawing nitrogen substituent. In the present approach, terminal alkynes were used as a source of the vinyl residue, and the N‐alkyl moiety of the imine acts as a sacrificial hydrogen donor. The additional advantage of this methodology is the fact that no external toxic or hazardous reducing agents or molecular hydrogen has to be used. This new methodology nicely combines a C(sp²)? C(sp) bond formation, hydride transfer, and an unusual cleavage of an unactivated C? N bond, thereby giving rise to functionalized primary allylic amines. A detailed experimental study supported by DFT calculations of the mechanism has been done.     

Atomic Layer Deposition of Cobalt Phosphide for Efficient Water Splitting

Transition‐metal phosphides (TMP) prepared by atomic layer deposition (ALD) are reported for the first time. Ultrathin Co‐P films were deposited by using PH₃ plasma as the phosphorus source and an extra H₂ plasma step to remove excess P in the growing films. The optimized ALD process proceeded by self‐limited layer‐by‐layer growth, and the deposited Co‐P films were highly pure and smooth. The Co‐P films deposited via ALD exhibited better electrochemical and photoelectrochemical hydrogen evolution reaction (HER) activities than similar Co‐P films prepared by the traditional post‐phosphorization method. Moreover, the deposition of ultrathin Co‐P films on periodic trenches was demonstrated, which highlights the broad and promising potential application of this ALD process for a conformal coating of TMP films on complex three‐dimensional (3D) architectures.