Carbon nanotube-carbon black hybrid counter electrodes for dye-sensitized solar cells and the effect on charge transfer kinetics

In this work, the catalytic activity of carbon nanotubes (CNTs), carbon black (CB), and CNT-CB counter electrodes in the I⁻/I₃⁻ reduction reaction is reported and compared with the Pt counter electrode. The fabricated counter electrodes were evaluated in dye-sensitized solar cells (DSSCs). The results indicate that the best cathodes were made from CNT₁₀ (240 μm) and CB with a charge transfer resistance (R_CT) of 2.70 Ω, and when the complete device shows 19.83 Ω of internal series resistance (R_S), the photovoltaic parameters of these cells were J_SC = 10.47 mA cm⁻²; V_OC = 0.70 V; and FF = 57.90, with an efficiency of 4.29%, indicating a better interaction between the CNT₁₀ in the 3D network of the counter electrode, generating a good charge transfer kinetics, in comparison with only CNT₁₀ or CB.

     

Validation of a HPLC/MS method for simultaneous quantification of clonidine,morphine and its metabolites in human plasma

A high‐performance liquid chromatography–tandem mass spectrometry method was developed and validated for the simultaneous quantification of morphine, morphine's major metabolites morphine‐3‐glucuronide and morphine‐6‐glucuronide, and clonidine, to support the pharmacokinetic analysis of an ongoing double‐blinded randomized clinical trial that compares the use of morphine and clonidine in infants diagnosed with neonatal abstinence syndrome. Plasma samples were processed by solid‐phase extraction and separated on an Inertsil ODS‐3 (4 μm) column using an 0.1% formic acid in water–0.1% formic acid in methanol gradient. Detection of the analytes was conducted in the positive multiple reaction monitoring mode. The range of quantitation was 1–1000 ng/mL for morphine, morphine‐3‐glucuronide and morphine‐6‐glucuronide, and 0.25–100 ng/mL for clonidine. Intra‐day and inter‐day accuracy and precision were ≤15% for all analytes across the quantitation range. Extraction recovery rates were ≥94% for morphine, ≥90% for M3G, ≥87% for M6G and ≥ 79% for clonidine. Matrix effect ranged from 85–94% for clonidine to 101–106% for M3G. The method fulfilled all predetermined acceptance criteria and required only 100 μL of starting plasma volume. Furthermore, it was successfully applied to 30 clinical trial plasma samples.     

Bioprinting of Collagen: Considerations,Potentials, and Applications

Collagen is the most abundant extracellular matrix protein that is widely used in tissue engineering (TE). There is little research done on printing pure collagen. To understand the bottlenecks in printing pure collagen, it is imperative to understand collagen from a bottom‐up approach. Here it is aimed to provide a comprehensive overview of collagen printing, where collagen assembly in vivo and the various sources of collagen available for TE application are first understood. Next, the current printing technologies and strategy for printing collagen‐based materials are highlighted. Considerations and key challenges faced in collagen printing are identified. Finally, the key research areas that would enhance the functionality of printed collagen are presented.     

Iridium‐ and Osmium‐decorated Reduced Graphenes as Promising Catalysts for Hydrogen Evolution

Renewable energy sources are highly sought after as a result of numerous worldwide problems concerning the environment and the shortage of energy. Currently, the focus in the field is on the development of catalysts that are able to provide water splitting catalysis and energy storage for the hydrogen evolution reaction (HER). While platinum is an excellent material for HER catalysis, it is costly and rare. In this work, we investigated the electrocatalytic abilities of various graphene–metal hybrids to replace platinum for the HER. The graphene materials were doped with 4f metals, namely, iridium, osmium, platinum and rhenium, as well as 3d metals, namely, cobalt, iron and manganese. We discovered that a few hybrids, in particular iridium‐ and osmium‐doped graphenes, have the potential to become competent electrocatalysts owing to their low costs and—more importantly—to their promising electrochemical performances towards the HER. One of the more noteworthy observations of this work is the superiority of these two hybrids over MoS₂, a well‐known electrocatalyst for the HER.     

Effect of thermal annealing on a bilayer polyvinyl alcohol/polyacrylic acid electrospun hydrogel nanofibres loaded with doxorubicin and clarithromycin for a synergism effect against osteosarcoma cells

Polyvinyl alcohol/polyacrylic acid (PVA/PAA) bilayer hydrogel nanofibres were successfully fabricated by electrospinning and physically crosslinked via heat treatment. The effects of the thermal annealing process on the structure, morphology, swelling, thermal properties and hydrophilicity of electrospun nanofibres were investigated. In addition, these membranes were also used to incorporate doxorubicin and clarithromycin for osteosarcoma treatment, one in each layer. These drugs were used because it is hypothesized in this work that a synergism occurs between both drugs. So, these membranes were analyzed towards their dual-drug release and potential cytotoxicity towards the U2OS human osteosarcoma cell line. Moreover, the water contact angle, disintegration, swelling and weight loss studies confirmed the rapid swelling and improved water stability of the annealed PVA/PAA bilayer nanofibres. The annealed bilayer nanofibres exhibited an increase in the average diameter and degree of crystallinity. In addition, the results revealed that a variation occurred in the degree of hydrophilicity of annealed PVA/PAA bilayer nanofibres. The PAA nanofibres surface exhibited higher hydrophilicity than the PVA nanofibres surface. Drug delivery presented to be as fast rate release for clarithromycin and slow-rate release for doxorubicin, which may be advantageous because both drugs exhibited to be synergetic for certain dosages presenting the combination of the drugs higher than 50% of cell inhibition, while these membranes had higher inhibition values (up to 90%), which was attributed to the PAA but also the drugs. These unique properties are of potential interest in drug delivery applications for dual drug delivery where the tunability of surfaces is desirable.     

Enantioselective Synthesis of Spiroindenes by Enol‐Directed Rhodium(III)‐Catalyzed C?H Functionalization and Spiroannulation

Chiral cyclopentadienyl rhodium complexes promote highly enantioselective enol‐directed C(sp²)‐H functionalization and oxidative annulation with alkynes to give spiroindenes containing all‐carbon quaternary stereocenters. High selectivity between two possible directing groups, as well as control of the direction of rotation in the isomerization of an O‐bound rhodium enolate into the C‐bound isomer, appear to be critical for high enantiomeric excesses.     

Cleavage of a PN Bond in a Urea‐Containing (Ph2P(R)PPh2)‐Bridged Dinuclear Gold(I) Thiolate Complex by Fluoride and a Mechanistic Insight

A urea‐containing, (Ph₂P(R)PPh₂)‐bridged, dinuclear, gold(I) thiolate complex, [Au₂{Ph₂PN(C₆H₄OMe‐4)PPh₂}(SC₆H₄NHCONHC₆H₅)₂] ( 1 ) was designed and synthesized and its photophysical and anion recognition properties studied. The results show that 1 has a high selectivity toward F^?. Upon addition of F^?, the yellow solution was decolorized, and drastic changes of emission and ¹H and ³¹P{¹H} NMR signals were observed. Interestingly, these changes are attributed to fluoride‐assisted P?N bond hydrolysis, instead of the expected hydrogen‐bonding interactions with the urea receptor. Similar changes were observed for two other basic anions, AcO^? and H₂PO₄^?, but to a much lesser extent; and these anions were found to bind to the urea receptor at the same time. On the other hand, Cl^? was found to only bind to the urea moiety through hydrogen‐bonding interactions. Further studies with the control complex [Au₂{Ph₂PN(C₆H₄OMe‐4)PPh₂}Cl₂] ( 2 ) indicate that F^? assists the hydrolysis process via cleavage of the P?N bond. DFT calculations were performed to study the reaction mechanism for the fluoride‐assisted P?N bond hydrolysis of 2 ; these provide a better insight into the role of fluoride in the hydrolysis.     

Six‐wave mixing induced by free‐carrier plasma in silicon nanowire waveguides

Nonlinear wave mixing in mesoscopic silicon structures is a fundamental nonlinear process with broad impact and applications. Silicon nanowire waveguides, in particular, have large third‐order Kerr nonlinearity, enabling salient and abundant four‐wave‐mixing dynamics and functionalities. Besides the Kerr effect, in silicon waveguides two‐photon absorption generates high free‐carrier densities, with corresponding fifth‐order nonlinearity in the forms of free‐carrier dispersion and free‐carrier absorption. However, whether these fifth‐order free‐carrier nonlinear effects can lead to six‐wave‐mixing dynamics still remains an open question until now. Here we report the demonstration of free‐carrier‐induced six‐wave mixing in silicon nanowires. Unique features, including inverse detuning dependence of six‐wave‐mixing efficiency and its higher sensitivity to pump power, are originally observed and verified by analytical prediction and numerical modeling. Additionally, asymmetric sideband generation is observed for different laser detunings, resulting from the phase‐sensitive interactions between free‐carrier six‐wave‐mixing and Kerr four‐wave‐mixing dynamics. These discoveries provide a new path for nonlinear multi‐wave interactions in nanoscale platforms.