Conjugate addition of pyrroles to α,β-unsaturated ketones using copper bromide as a catalyst

Copper bromide was used as a catalyst for the addition of pyrroles to enones. When both the reactants were used in equimolar amounts, mono and dialkylated products were obtained. However, the use of excess enone furnished only dialkylated products. Thus, copper bromide was shown to be an efficient catalyst for the dialkylation of pyrroles.     

Synthesis and Characterization of Silica@Copper Core–Shell Nanoparticles: Application for Conjugate Addition Reactions

Silica@copper (SiO₂@Cu) core–shell nanoparticles were synthesized and well characterized by XRD, TEM, AFM, XPS, UV/Vis, TGA–MS, and ICP–AES techniques. The synthesized SiO₂@Cu core–shell nanoparticles were employed as catalysts for the conjugate addition of amines to α,β‐unsaturated compounds in water to obtain β‐amino carbonyl compounds in excellent yields in shorter reaction times. Furthermore, the catalyst works well for hetero‐Michael addition reactions of heteroatom nucleophiles such as thiols to α,β‐unsaturated compounds. As the reaction is performed in water, it allows for easy recycling of the catalyst with consistent activity.     

Extractive spectrophotometric determination of Cobalt(II) in synthetic and pharmaceutical samples using Cyanex 923.

Cyanex 923 has been proposed as a sensitive analytical reagent for the direct extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a blue-colored complex with Cyanex 923 in the organic phase. The maximum absorbance of the complex is measured at 635 nm. Beer's law was obeyed in the range 58.9 - 589.0 microg of cobalt. The molar absorptivitiy and Sandell's sensitivity of the complex was calculated to be 6.79 x 10920 l mol(-1) cm(-1) and 0.088 microg cm(-2), respectively. The nature of the extracted species was found to be Co(SCN)2 x 2S. An excellent linearity with a correlation coefficient value of 0.999 was obtained for the Co(II)-Cyanex 923 complex. Stability and regeneration of the reagent (Cyanex 923) for reuse is the main advantage of the present method. The method was successfully applied to the determination of cobalt in synthetic mixtures and pharmaceutical samples was found to give values close to the actual ones. Standard alloy samples, such as high-speed tool BCS 484 and 485, have been tested for the determination of cobalt for the purpose of validating the present method. The results of the proposed method are comparable with atomic absorption spectrometry and were found to be in good agreement.     

Solvent and thiourea adsorption/intercalation effects on the solid-state electrochemistry of α-phase nickel hydroxide nanoparticles

Nanoparticles of α-phase nickel hydroxide were synthesized by a single-step hydrothermal method using urea as the hydrolytic agent. Precipitated powders were of pure turbostratic α-phase as confirmed by x-ray diffraction profile. The ageing of α-Ni(OH)₂ in 1.0 M alkali solutions is investigated for pure non-intercalated α-Ni(OH)₂ and thiourea intercalated/absorbed α-phase nanomaterials. The α-Ni(OH)₂ powder immobilized on the surface of graphite electrodes shows a gradual α→β phase transformation with continuous voltammetric cycling, and the concentration gradient of water that exists in the layered-double-hydroxide-like interlayers of α-phase and the solution was shown to play a crucial role on the high electrochemical activity of this phase nickel hydroxide. To understand the role of water in the ageing process, concomitant entries of non-aqueous solvents like ethanol and acetonitrile along with thiourea were effected. Cyclic voltammetric measurements of thiourea-treated α-Ni(OH)₂ samples revealed that hydroxyl ion influx during the anodic oxidation depends on the counter flux of solvent molecules, and if the intercalated the solvent is acetonitrile, then the electrochemical activity of α-Ni(OH)₂ reduced drastically; Q _a/Q _c>1 for water as solvent in the interlayers α-Ni(OH)₂ and Q _a/Q _c<1 for ethanol and acetonitrile as solvents. The α-phase gets stabilized in the presence of thiourea with water and ethanol as co-intercalates. Transmission electron microscope images of α-Ni(OH)₂ and thiourea-treated samples show a change in particle size and morphology. Elemental CHNS analysis confirms the presence of sulphur in the thiourea intercalated samples.     

A molecular beam study of the NO + CO reaction on Pd(111) surfaces

Nitric oxide (NO) reduction with carbon monoxide (CO) on the Pd(111) surface was studied under isothermal conditions by molecular beam techniques as a function of temperature, NO:CO beam composition, and beam flux. Systematic experiments were performed under transient and steady state conditions. Displacement of adsorbed CO by NO in the transient state of the reaction was observed at temperatures between 375 and 475 K for all the NO:CO compositions studied. NO accumulation occurs on Pd(111) surface under steady state conditions, below 475 K, due to stronger chemisorption of NO. The steady state reaction rates attain a maximum at about 475 K, nearly independent of beam composition. N2 was found to be the major product of the reduction, along with a minor production of N2O. The production of N2 and N2O indicates molecular and dissociative adsorption of NO on Pd(111) at temperatures up to 525 K. Postreaction TPD measurements were performed in order to determine the nitrogen coverage under steady-state conditions. Finally, the results are discussed with respect to the rate-controlling character of the different elementary steps of the reaction system.     

New lipids from the soft corals of the Andaman Islands

Sphingolipids and glycolipids including previously unknown (2S,3S,4R)-1,3,4-trihydroxy-2-(2-(R)-hydroxyoctadecanoylamino)octadec-8E-ene, (2S,3R)-1,3-dihydroxy-2-octadecanoylamino-4E,8E-hexadecadiene, and (2-hydroxy-3-hexadecyloxypropyl)--L-fucopyranoside were isolated from soft corals collected on the shelf near the Andaman Islands (Indian Ocean). The structures of all compounds were established by spectroscopic methods and chemical analyses. The lipids possessed antibacterial activity against Bacillus subtilis, Bacillus pumilus, Escherichia coli, and Pseudomonas aeruginosa and antifungal activity against Aspergillus niger, Rhizopus oryzae, and Candida albicans.     

Novel zigzag-shaped compounds exhibiting apolar columnar mesophases with oblique and rectangular lattices

The design, synthesis and characterisation of some compounds whose constituent molecules have a completely new shape have been carried out. A total of eight different series/part of series of these zigzag-shaped compounds that are either symmetrical or unsymmetrical were synthesised. Only two mesophases were observed, and on the basis of polarising optical microscopy, differential scanning calorimetry, X-ray diffraction and electro-optical studies, these have been characterised as columnar phases with a rectangular or an oblique lattice. Perhaps, these represent the first examples of a rigid zigzag-shaped compound exhibiting a mesophase.     

A comparative study of myo-inositol quantification using LCmodel at 1.5 T and 3.0 T with 3 D 1H proton spectroscopic imaging of the human brain

Myo-inositol is a strongly coupled system and resonates at four chemical shift positions. At 1.5 T, only the singlet component at 3.57 ppm is detected. However, at 3 T this resonance is resolved into its components at 3.55 ppm and 3.61 ppm. Due to the increased spectral resolution and signal-to-noise ratio, it is anticipated that the quantification of myo-inositol should improve at 3 T. Using data from normal controls and the LCmodel quantification procedure, we found that the quantification precision, reproducibility and detection sensitivity of myo-inositol is significantly better at 3 T relative to 1.5 T.     

Can Co(II) or Cd(II) substitute for Zn(II) in zinc fingers?

Zinc finger domains consist of sequences of amino acids containing cysteine and histidine residues tetrahedrally coordinated to a zinc ion. The role of zinc in a DNA binding finger was considered purely structural due to the absence of redox chemistry in zinc. However, whether other metals e.g. Co(II) or Cd(II) can substitute Zn(II) is not settled. For an answer the detailed interaction of Co(II) and Cd(II) with cysteine methylester and histidine methylester has been investigated as a model for the zinc core in zinc fingers. The study was extended to different temperatures to evaluate the thermodynamic parameters associated with these interactions. The results suggest that zinc has a unique role.     

New and efficient routes for the synthesis of murrayaquinone A and murrayanine

Three new routes were established for the synthesis of biologically active murrayaquinone A and a new method was developed for synthesis of murrayanine from the same starting material as 4-hydroxy carbazole. During the synthetic course a few novel observation were recorded, which include two one pot reaction sequences and C–N bond cleavage by sodium cyanoborohydride.