Viscosity of particle filled polymer melts

Summary Viscosities of particle filled polymer melts were measured at fairly low shear rate. Particles were glass beads, glass balloons, and silas balloons. Polymers were polyethylene and polystyrene. Flow curves were superimposed with respect to concentration of filler. The relative viscosity defined as the ratio of viscosity of filled polymer to that of unfilled polymer at the same shear stress is obtained as an asymptotic value even for highly filled material. The relation between relative viscosity and volume fraction of filler was represented by the equations derived byMaron andPierce orMooney. Only the distribution of particle size had influence on relative viscosity at a defined filler concentration. Yield stresses were estimated, and found to increase exponentially in the range of volume fraction from 0.1 to 0.5.

---

Zusammenfassung Viskositäten von Polymerschmelzen, die mit Teilchen gefüllt worden waren, wurden bei mittleren Schergeschwindigkeiten bestimmt. Als Teilchen wurden Voll- und Hohlkugeln aus Glas, sowie sog. silas balloons, als Polymere Polyäthylen und Polystyrol verwendet. Die Fließkurven für verschiedene Füllstoffkonzentrationen wurden überlagert. Die relative Viskosität, definiert als das Verhältnis der Viskositäten von gefülltem und ungefülltem Polymer bei gleicher Schubspannung, besitzt einen asymptotischen Wert selbst für hoch gefülltes Material. Die Beziehung zwischen relativer Viskosität und Füllstoff-Volumenkonzentration läßt sich durch eine vonMaron undPierce oder eine vonMooney abgeleitete Gleichung beschreiben. Nur die Teilchengrößenverteilung hat bei einer definierten Füllstoffkonzentration einen Einfluß auf die relative Viskosität. Fließspannungen werden abgeschätzt und dafür in einem Konzentrationsbereich zwischen 0,1 und 0,5 ein exponentieller Anstieg gefunden.

---

---

With 13 figures and 2 tables     

An analysis of horizontal plane motion of tracked vehicles

This paper presents a theoretical analysis of non-stationary motion of a tracked vehicle on level ground. A practical model that includes track slippage, inertia force and the moment of inertia was developed to analyze and predict steering dynamics and steerability on the subject examined.

The system of differential equations was programmed and numerically solved on a digital computer, where the inputs are circumferential velocities of right and left drive sprockets.

The simulations for J-turn maneuver disclose the effects of initial forward velocities on the transient responses of the track slip velocity, side slip angle, yaw rate, and acceleration of the center of gravity of a tracked vehicle.     

The rheology of suspensions of vinylon fibers in polymer liquids. II. Suspensions in polymer solutions

Summary The rheological properties of vinylon fiber suspensions in polymer solutions were studied in steady shear flow. Shear viscosity, first normal-stress difference, yield stress, relative viscosity, and other properties were discussed. Three kinds of flexible vinylon fibers of uniform length and three kinds of polymer solutions as mediums which exhibited remarkable non-Newtonian behaviors were employed. The shear viscosity and relative viscosity ( _r ) increased with the fiber content and the aspect ratio, and depended upon the shear rate. Shear rate dependence of _r was found only in the low shear rate region. This result was different from that of vinylon fiber suspensions in Newtonian fluids. The first normal-stress difference increased at first slightly with increasing fiber content but rather decreased and showed lower values for high content suspensions than that of the medium. A yield stress could be determined by using a modified equation of Casson type. The flow properties of the fiber suspensions depended on the viscosity of the medium in the suspensions under consideration.With 16 figures and 1 table     

Specifications of a neutron exposure accelerator system for biological effects experiments (NASBEE) in NIRS

We developed a neutron irradiation facility, neutron exposure accelerator system for biological effect experiments (NASBEE) for biological studies in National Institute of Radiological Sciences, Japan. Irradiation field of 2 MeV average neutrons generated by a Be(d–n)B reaction is established. Dose uniformity of 240 mm in diameter irradiation field is producible within ±2.5% with a dose rate of 0.87 Gy/h at sample target distance of 1170 mm. Two irradiation rooms, a specific pathogen-free (SPF) conditioned one and a conventional, are now available. Irradiation protocols for in vitro experiments are now established and demonstrated by obtaining a relative biological effectiveness (RBE) of cell inactivation measured to be 3.54 with 10% survival dose (D₁₀).     

Alkylative Carbocyclization of ω‐Iodoalkynyl Tosylates with Alkynyllithium Compounds Through a Carbenoid‐Chain Process Leading to (1‐Iodoprop‐2‐ynylidene)tetrahydrofurans and ‐cyclopropanes

Alkylative carbocyclization reactions of ω‐iodoalkynyl tosylates with alkynyllithium compounds to give products with incorporated iodine atoms are described. Slow addition of 2‐(3‐iodoprop‐2‐ynyloxy)ethyl tosylates to 1‐alkynyllithium compounds in tetrahydrofuran at 40 °C followed by additional stirring at this temperature gives (Z)‐3‐(1‐iodoprop‐2‐ynylidene)tetrahydrofurans stereoselectively in good to moderate yields. Under similar conditions at 0 °C, 4‐iodobut‐1‐ynyl tosylates react with 1‐alkynyllithium compounds to give (1‐iodoprop‐2‐ynylidene)cyclopropanes. The carbocyclization reactions are proposed to proceed through a new carbenoid‐chain process involving the exo cyclization of a lithium acetylide intermediate and the vinylic substitution of the resulting TsO,Li‐cycloalkylidenecarbenoids (Ts=tosyl) by 1‐alkynyllithium compounds.