Development of a bioanalytical method for the quantification of sinococuline in human plasma and its application in phase I clinical pharmacokinetic study

A selective, highly sensitive, precise, and novel bioanalytical method has been developed and validated to quantify sinococuline, an active constituent present in the phytopharmaceutical drug product containing Cocculus hirsutus plant extract, in vivo. Chromatographic separation was achieved on a Luna Omega Polar-C18 bonded analytical column maintained at 45°C. The isocratic mobile phase consisted of methanol and ammonium formate buffer (60:40, v/v) at acidic pH with a low flow rate of 0.250 mL/min. Detection was performed on an API 4000 mass spectrometer using electrospray ionization in positive polarity and multiple reaction monitoring mode to achieve a lower limit of quantification of 1.50 ng/mL. Excellent accuracy and precision were obtained after extracting the analyte from plasma samples using a chemical analogue as an internal standard in the absence of an isotope-labeled compound. The extraction efficacy was evidenced from recovery study, and the analyte was found to be stable in plasma. Validation study demonstrated linearity with coefficient of correlation, r ≥ 0.99, and minimal matrix effect. This bioanalytical method was successfully applied to evaluate pharmacokinetic parameters of sinococuline from a phase I clinical trial of an aqueous extract of C. hirsutus in healthy human volunteers.     

Brominated poly(isobutylene‐co‐para‐methylstyrene) (BIMS)‐clay nanocomposites: Synthesis and characterization

In this work, preparation and properties of different nanoclays modified by organic amines (octadecyl amine, a primary amine, and hexadecyltrimethylammonium bromide, a tertiary amine) and brominated polyisobutylene‐co‐paramethylstyrene (BIMS)‐clay nanocomposites are reported. The clays and the rubber nanocomposites have been characterized with the help of Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X‐ray diffraction (XRD). The X‐ray diffraction peaks observed in the range of 3 °–10 ° for the modified clays disappear in the rubber nanocomposites. TEM photographs show predominantly exfoliation of the clays in the range of 12 ± 4 nm in the BIMS. In the FTIR spectra of the nanocomposites, there are common peaks of virgin rubber as well as those of the clays. Excellent improvement in mechanical properties like tensile strength, elongation at break, and modulus is observed on incorporation of the nanoclays in the BIMS. Structure‐property correlation in the above nanocomposites is attempted. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4489–4502, 2004     

Electrical characterization of low temperature deposited TiO2 films on strained-SiGe layers

Thin films of titanium dioxide have been deposited on strained Si_0.82Ge_0.18 epitaxial layers using titanium tetrakis-isopropoxide [TTIP, Ti(O-i-C₃H₇)₄] and oxygen by microwave plasma enhanced chemical vapor deposition (PECVD). The films have been characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Dielectric constant, equivalent oxide thickness (EOT), interface state density (D_it), fixed oxide charge density (Q_f/q) and flat-band voltage (V_FB) of as-deposited films were found to be 13.2, 40.6 Å, 6×10¹¹ eV⁻¹ cm⁻², 3.1×10¹¹ cm⁻² and −1.4 V, respectively. The capacitance–voltage (C–V), current–voltage (I–V) characteristics and charge trapping behavior of the films under constant current stressing exhibit an excellent interface quality and high dielectric reliability making the films suitable for microelectronic applications.     

Highly stereoselective synthesis of peracylated α-aldopyranosyl chlorides from aldopyranose peracetates and thionyl chloride catalyzed by BiCl3 generated in situ from the procatalyst BiOCl

Aldopyranose peracetates react with thionyl chloride and BiCl₃, generated in situ from a substoichiometric amount of the procatalyst BiOCl, producing the corresponding peracylated aldopyranosyl chlorides in very good to excellent yields (82–97%) with exclusive α-anomeric selectivity.     

Formatation of pore structure in tape-cast alumina membranes – effects of binder content and firing temperature

Disc type ceramic aluminium oxide membrane has been prepared by tape casting technique. Thickness of this single layer membrane is in the range 200–300 μm. Porosity and pore size distribution have been determined by mercury porosimetry. Polymeric binder content of the green tape and the firing temperature are found to have strong influence on the average pore size, pore size distribution and overall porosity. Higher binder content promotes agglomeration of the ceramic particles, which on firing leads to wider pore size distribution and formation of closed pores. Pore coarsening is observed with increasing firing temperature.     

Polymerization of vinylcarbazole on copper(II)-13X molecular sieves: Role of copper(II) salts

Copper(II)-exchanged-13X molecular sieves, prepared from four copper(II) salts, namely, sulfate, nitrate, chloride, and acetate, and their activities in the polymerization of N-vinylcarbazole at a fixed copper ion exchange level were studied. From the kinetic characteristics of polymerization it was established that the variation in activities of the Cu-exchanged sieves is due primarily to the difference in the pH of the original salt solution, which is responsible for the varying degree of proton exchange with the zeolite during copper ion exchange. A first-order dependence of the rate of polymerization was observed with respect to H⁺ ion concentration of the original copper-salt solution. It was further established that the rate of polymerization of exchanged copper ion, at a hypothetical zero proton concentration, is low. A mechanism of polymerization of NVC on copper-exchanged-13X zeolite was suggested on the basis of the results obtained.     

Intramolecular fluorescence quenching in luminescent copolymers containing fluorenone and fluorene units: a direct measurement of intrachain exciton hopping rate

The quenching process of fluorescence emission in polyfluorene (PF) due to the presence of intramolecular 9-fluorenone (9 FL) moieties is studied in dilute toluene solution as a function of 9 FL content in eight copolymers containing both fluorene and fluorenone units (PF/FL(x)). The absorption spectrum of PF/FL(x) copolymers clearly shows a new absorption band, redshifted relatively to the PF and 9-fluorenone absorption, which increases in intensity when the fluorenone fraction increases and also decreases with solvent polarity. Fluorescence emission spectra of PF/FL(x) show that this redshifted and unstructured emission does not coincide with the 9-fluorenone emission and, with increasing solvent polarity, it further redshifts and decreases in intensity. An isoemissive point is clearly observed on the fluorescence emission spectra of PF/FL(x) as a function of fluorenone content, showing that the new emission band is formed at the expense of PF. We propose the formation of an intramolecular charge transfer complex (ICTC) between PF units and 9-fluorenone to explain the appearance of the new emission band. Global analysis of time resolved fluorescence decays collected at 415 nm (PF emission) and 580 nm (the ICTC emission) show that three exponentials are generally needed to achieve excellent fits. Two of the components (420 ps and 6.5 ns) are independent of 9-fluorenone fraction. A further fast component is strongly dependent on fluorenone fraction and ranges between 280 and 70 ps. This component appears as a decay time at 415 nm and as a rise time at 580 nm and is ascribed to the migration of exciton to quenching sites (formation of intramolecular CT complex or exciton ionization at CT complex). A kinetic mechanism involving three different kinetic species, quenched PF units kinetically coupled with the ICTC complex, and unquenched PF units is proposed to explain the experimental data and the quenching rate constant is obtained, k(1) congruent with 10(11) s(-1). This is an experimental measurement of the intrachain exciton hopping rate.     

Nanoparticles from cationic copolymer and DNA that are soluble and stable in common organic solvents

DNA by virtue of its superlative ability to self-assemble has found use beyond biological research in the design and fabrication of nanomaterials. However, developing novel DNA-based materials for chemical applications might be restricted due to the insoluble nature of DNA in most common organic solvents. In this Communication, we are reporting the first demonstration of making DNA soluble in a variety of nonbiological solvents such as acetonitrile, benzene, dimethyl sulfoxide (DMSO), and tetrahydrofuran with the help of poly(ethylene glycol) (PEG)-based cationic random copolymers. Because of complex formation between cationic copolymer and anionic DNA, nanoparticles are formed. These nanoparticles are expected to exhibit micelle-like structures with a nanometric core of cationic units neutralized by phosphate anions of DNA, surrounded by a shell of PEG segments. As PEG is soluble in the organic solvents used in this study, nanoparticles are stable in these solvents, making entrapped DNA soluble in these organic solvents.     

Transition metal carbene chemistry 2: kinetic studies on the nucleophilic substitution reactions of (CO)5MC(SCH3)CH3 (M = Cr and W) with morpholine in aqueous acetonitrile

Kinetic studies of the aminolysis of [methyl(thiomethyl)carbene]pentacarbonyl chromium(0),(CO)₅CrC(CH₃)(SCH₃) (1-Cr(S)) and [methyl(thiomethyl)carbene]pentacarbonyltungsten(0), (CO)₅WC(CH₃)(SCH₃) (1-W(S)), with morpholine, a secondary amine, in 50% acetonitrile-50% H₂O (v/v at 25 °C) is reported. The second-order rate constant (k_A in m⁻¹ s⁻¹) increases with amine concentration, giving a linear dependence with an intercept on the rate axis and a tendency towards leveling off at higher amine concentration. The reaction was found to undergo general base catalysis. The mechanism proposed is very similar to those for ester reactions, involving a nucleophilic addition of amine to the substrate to yield a zwitterionic tetrahedral intermediate in the first step, followed by deprotonation to form in the second step, which, in the third step, converted to product by H₂O and/or conjugate acid of the base (BH⁺), assisted MeS⁻ expulsion. The reactivity (k₁) of 1-W(S) was found to be higher than that of 1-Cr(S), whereas, comparable , water catalyzed and , BH⁺ catalyzed, leaving group departure were found for both the carbenes complexes. All these observations have been explained successfully.     

Chemically assisted ion beam etching of silicon and silicon dioxide using SF6

A chemical flux of sulfur hexafluoride (SF₆) in conjunction with low-energy Ar-ion bombardment has been used for chemically assisted ion beam etching (CAIBE) of silicon and silicon dioxide. The study has shown a large degree of independent control over the selectivity and anisotropy in dry etching. The total etch rate could be controlled by varying either the Ar-ion milling parameters or the chemical flux of SF₆. Etch rate enhancement of 7–8 for silicon and 3–4 for silicon dioxide have been obtained over pure physical etching.