Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm

The need for more efficient power cycles has attracted interest in super-critical CO₂ (sCO₂) cycles. However, the effects of high CO₂ dilution on auto-ignition at extremely high pressures has not been studied in depth. As part of the effort to understand oxy-fuel combustion with massive CO₂ dilution, we have measured shock tube ignition delay times (IDT) for methane/O₂/CO₂ mixtures and hydrogen/O₂/CO₂ mixtures using sidewall pressure and OH* emission near 306?nm. Ignition delay time was measured in two different facilities behind reflected shock waves over a range of temperatures, 1045–1578?K, in different pressures and mixture regimes, i.e., CH₄/O₂/CO₂ mixtures at 27–286 atm and H₂/O₂/CO₂ mixtures at 37–311 atm. The measured data were compared with the predictions of two recent kinetics models. Fair agreement was found between model and experiment over most of the operating conditions studied. For those conditions where kinetic models fail, the current ignition delay time measurements provide useful target data for development and validation of the mechanisms.     

Investigating the effect of operating parameters on the open circuit voltage of a passive DMFC

The variations of the open circuit voltages (OCVs) were studied in a passive air-breathing direct methanol fuel cell with an air-breathing cathode using Nafion 115 as the electrolyte membrane. The effects of some operating parameters such as cell temperature, cell orientation, and also methanol concentration on the OCV of fabricated fuel cell were investigated experimentally. The experimental results showed that the OCV values depend strongly on the cell orientation, cell temperature, and methanol concentration. The OCV values decrease with an increase in methanol concentration and cell temperature. Also, the OCV values in vertical orientation are lower than the OCV values in other orientations.     

Influence of staff number and internal constellation on surgical site infection in an operating room

Prediction of bacteria-carrying particle （BCP） dispersion and particle distribution released from staffmem- bers in an operating room （OR） is very important for creating and sustaining a safe indoor environment. Postoperative wound infections cause significant morbidity and mortality, and contribute to increased hospitalization time. Increasing the number of personnel within the OR disrupts the ventilation airflow pattern and causes enhanced contamination risk in the area of an open wound. Whether the amount of staffwithin the OR influences the BCP distribution in the surgical zone has rarely been investigated. This study was conducted to explore the influence of the number of personnel in the OR on the airflow field and the BCP distribution. This was performed by applying a numerical calculation to map the airflow field and Lagrangian particle tracking （LPT） for the BCP phase. The results are reported both for active sampling and passive monitoring approaches. Not surprisingly, a growing trend in the BCP concentration （cfu/ms） was observed as the amount of staff in the OR increased. Passive sampling shows unpredictable results due to the sedimentation rate, especially for small particles （5-10 i~m）. Risk factors for surgical site infections （SSls） must be well understood to develop more effective prevention programs.     

Determination of Chlorophenoxy Acid Herbicides in Water Samples by Suspended Liquid-Phase Microextraction�CLiquid Chromatography

In this study, directly suspended liquid-phase microextraction was investigated for the extraction and determination of five chlorophenoxy acid herbicides in water samples. The optimized parameters for extraction of chlorophenoxy acid herbicides were 1 M HCl concentration in sample solution, solution temperature 20 °C, 45-min extraction time, 1,000 rpm stirring rate, 25 ??L extracting solvent volume and without NaCl addition. Under the optimum conditions, the enrichment factor ranged from 192 to 390. Calibration curves yielded good linearity (R ² > 0.999) and the linear range was 5.0?C500.0 ??g L^?1, limit of detection was 0.3?C0.4 ??g L^?1 and limit of quantification was 1?C2 ??g L^?1 for analytes and the relative standard deviations were in the range of 3?C10% (n = 3). Finally, the proposed method was successfully applied to the quantification of five chlorophenoxy acid herbicides in water samples and recovery was in the range of 74?C110%.     

Fresnel incoherent correlation hologram—— a review （Invited Paper）

Holographic imaging offers a reliable and fast method to capture the complete three-dimensional （3D） information of the scene from a single perspective. We review our recently proposed single-channel optical system for generating digital Fresnel holograms of 3D real-existing objects illuminated by incoherent light. In this motionless holographic technique, light is reflected, or emitted from a 3D object, propagates through a spatial light modulator （SLM）, and is recorded by a digital camera. The SLM is used as a beamsplitter of the single-channel incoherent interferometer, such that each spherical beam originated from each object point is split into two spherical beams with two different curve radii. Incoherent sum of the entire interferences between all the couples of spherical beams creates the Fresnel hologram of the observed 3D object. When this hologram is reconstructed in the computer, the 3D properties of the object are revealed.     

Curvilinear smoothed particle hydrodynamics

We suggest a new set of equations to employ smoothed particle hydrodynamics (SPH) in a curvilinear space, and we refer to it as curvSPH. In classical SPH, the horizontal and vertical resolution of discretization is supposed to be equal for fluid particles. However, curvSPH makes the horizontal and vertical resolutions independent from each other. This is performed by transformation of physical space into an appropriate computational space with a different scale in horizontal and vertical directions. Solving a problem using SPH in a curvilinear space also provides capability to model curved boundaries as straight lines. In classical SPH, special care is needed to reach a uniform mass distribution along curved boundaries; however, producing uniform mass distribution along a line using curvSPH is straight forward. Different simulations, including simulation of a flip bucket are performed to demonstrate the applicability of the proposed method. Good agreement of results with experimental data and classical SPH confirms the capabilities of curvSPH. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and characterization of cellulose-ZnO nanocomposite based on ionic liquid ([C4mim]Cl)

Cellulose-ZnO composite was achieved by microwave assisted dissolution of cellulose in ionic liquid 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) followed by addition of premixed ground of Zn(CH₃COO)₂·2H₂O and NaOH. Surface characterization, optical property and thermal stability of nanocomposite were determined by X-ray diffraction, scanning electron microscopy (SEM), UV–Vis spectroscopy and thermo gravimetric analysis. XRD patterns showed the ZnO in polymer matrix has the wurtzite structure. Presence of zinc oxide nanoparticles and cellulose fibers in the composites were observed by SEM. Band-edge transition of zinc oxide in the nanocomposite occurs in lower wavelength than bulk zinc oxide. Thermal stability of nanocomposite was lower than regenerated cellulose due to catalyst behavior of zinc oxide nanoparticles in cellulose matrix.     

Modified Schmidt games and Diophantine approximation with weights

We show that the sets of weighted badly approximable vectors in Rn are winning sets of certain games, which are modifications of (α,β)-games introduced by W.M. Schmidt in 1966. The latter winning property is stable with respect to countable intersections, and is shown to imply full Hausdorff dimension.     

Detection of specific Bacillus anthracis spore biomarkers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

Analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was applied for the characterization of Bacillus anthracis spore biomarkers. B. anthracis spores were extracted under a simple procedure, followed by linear mode analysis, using sinapinic acid as the matrix. Several markers with a mass range of 4-7 kDa were detected in three B. anthracis strains: Vollum, Sterne and V770-NP1-R. Similar spectra were also obtained for spore extracts of two members of the B. cereus group: B. thuringiensis and B. cereus, but not for B. mycoides, B. subtilis or B. licheniformis, suggesting that these markers are specific to closely related members of the B. cereus group. When alpha-cyano-4-hydroxycinnamic acid was used as the matrix, at least four additional new markers within a mass range of 2-4 kDa could be detected in all B. anthracis spore extracts. These markers, corresponding to a molecular weight of 2528.3, 2792.4, 3077.4, and 3590.7 Da, have not been observed in extracts of the three closely related Bacillus species - B. cereus, B. thuringiensis and B. mycoides. These unique B. anthracis biomarkers, which were isotopically resolved and reproducibly detected in the highly accurate MALDI-TOFMS reflectron mode, may be useful as a basis for rapid and specific identification of B. anthracis strains.     

The effect of cell orientations and environmental conditions on the performance of a passive DMFC single cell

A single cell passive air-breathing liquid feed direct methanol fuel cell (DMFC) is designed and fabricated. Furthermore, the effects of cell orientation and environmental conditions such as temperature and relative humidity on the performance of such passive DMFC are tested experimentally. The obtained results indicate that both environmental temperature and relative humidity have significant effects on the performance of fabricated fuel cell. The experimental data contained within this work shows that under lower relative humidity and higher temperature, the passive air-breathing direct methanol fuel cell has higher power output and better performance. According to experimental results, flooding has a vital role on the cell performance in various relative humidity and temperatures. The results also show that cell orientation has a strong effect on the performance of passive DMFC. The best power output and performance were achieved under vertical orientation.