Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Influence of Cross-Sectional Uncertainty on Sensitivity Studies of DUNE and T2HK Experiments

International Journal of Theoretical Physics - We successfully realized symmetric and asymmetric cyclic quantum teleportation by using different controllers for each receiver. In this study, Alice...     

Effects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method

Journal of Thermal Analysis and Calorimetry - Willemite is an inorganic semiconductor material used for optoelectronic applications. The present study purposes a new polymer thermal treatment...     

Techno-economic analysis of new integrated system of humid air turbine,organic Rankine cycle,and parabolic trough collector

Journal of Thermal Analysis and Calorimetry - Microgas turbines are one of the most well-known technologies for distributed generation. Unfortunately, their efficiency is not as high as it should...     

Special chaotic systems

The European Physical Journal Special Topics - This topical issue collects contributions related to recent achievements and scientific progress in special chaotic systems. The individual papers...     

Antioxidant activities and bioactive compounds of five Jalopeno peppers (Capsicum annuum) cultivars

The present study was designed to evaluate the contents of different antioxidants compounds and their antioxidant activities in Jalopeno peppers (Capsicum annuum) cultivars (El Dorido, Grande, Tula, Sayula and El Rey) extracts. Free radical scavenging activity of Grande was recorded as high as 87% followed by El Dorido (83%). Results of reducing power (Fe³⁺ to Fe²⁺) showed that Grande (0.85%) and El Dorido (0.81%) fruit extract absorbance value were close to synthetic antioxidant BHT (0. 97%) obtained at100 μg/mL. The results showed that total phenolic content of El Dorido and Grande were significantly higher compared to other Jalapeno pepper. Results indicated strong and positive correlation between antioxidant activity and carotenoids content (r = 0.75), vitamin C (r = 0.78) and total capsaicinoids (r = 0.84), respectively. The results of the antioxidant activity assays showed that the El Dorido and Grande had strongest antioxidant activity compared to other peppers cultivars in this study.     

Doping radius effects on an erbium-doped fiber amplifier

In an erbium-doped fiber amplifier(EDFA), erbium ions act as a three-level system. Therefore, much higher pump energy is required to achieve the population inversion in an erbium-doped fiber(EDF). This higher pump energy requirement complicates the efficient design of an EDFA. However, efficient use of the pump power can improve the EDFA performance. The improved performance of an EDFA can be obtained by reducing the doping radius of the EDF. A smaller doping radius increases pump–dopant interactions and subsequently increases the pump–photon conversion efficiency. Decreasing the doping radius allows a larger proportion of dopant ions,which are concentrated near the core, to interact with the highest pump intensity. However, decreasing the doping radius beyond a certain limit will bring the dopant ions much closer and introduce detrimental ion–ion interaction effects. In this Letter, we show that an optimal doping radius in an EDF can provide the best gain performance. Moreover, we have simulated the well-known numerical aperture effects on EDFA gain performance to support our claim.     

Study on Viscous Fluid Flow in Disordered-Deformable Porous Media Using Hydro-mechanically Coupled Pore-Network Modeling

Transport in Porous Media - We investigate viscous fluid flows and concurrent fluid-driven deformations in porous media. The hydro-mechanically (H-M) coupled pore-network model (PNM) is developed,...