Solid‐phase extraction based on a molecularly imprinted polymer for the selective determination of four benzophenones in tap and river water

This work reports the preparation of molecularly imprinted polymer particles for the selective extraction and determination of four benzophenones from aqueous media. The polymer was prepared by using 4‐vinylpridine as functional monomer, ethylene glycol dimethacrylate as cross‐linker, acetonitrile as porogenic solvent and 2,2’,4,4’‐tetrehydroxybenzophenone as template. Good specific adsorption capacity (Q_max = 27.90 μmol/g) for 2,2’,4,4’‐tetrehydroxybenzophenone was obtained in the sorption experiment and good class selectivity for 2,2’,4,4’‐tetrehydroxybenzophenone, 2,4‐dihydroxybenzophenone, 2,2’‐dihydroxy‐4‐methoxybenzophenone, 2,2’‐dehydroxy‐4,4’‐dimethoxybenzophenone was demonstrated by the chromatographic evaluation experiment. Factors affecting the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were investigated systematically. An accurate and sensitive analytical method based on the molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography and diode array detection has been successfully developed for the simultaneous determination of four benzophenones from tap water and river water with method detection limits of 0.25–0.72 ng/mL. The recoveries of benzophenones for water samples at two spiking levels (500 and 5000 ng/mL for each benzophenone) were in the range of 86.9–103.3% with relative standard deviations (n = 3) below 9.2%.     

无溶剂高度分散Ni/MCM-41催化剂的制备及其萘加氢性能

分别用机械研磨无溶剂法、添加柠檬酸无溶剂法制备了Ni/MCM-41催化剂,对所制催化剂进行了分析表征,探究其萘加氢反应性能并与常规浸渍法进行了对比。与常规浸渍法相比,机械研磨无溶剂法所制催化剂的物理性质相近,金属镍分散度和萘加氢性能略有提高;添加柠檬酸无溶剂法则显著提升了催化剂的分散度和萘加氢性能,金属镍分散度由6.9%大幅提高至67.9%,萘加氢性能提高了近1倍。通过红外光谱、紫外光谱和热重分析,提出了添加柠檬酸对无溶剂法制备催化剂性能的促进作用机制。     

氮掺杂鸡毛碳点荧光关开探针用于测定百草枯

以鸡毛和乙二胺为碳源和氮源,通过一步水热法合成强荧光性能的氮掺杂碳量子点(N-CQDs),并优化其制备和掺杂条件。该碳量子点具有良好的光学、结构性质和稳定性,平均粒径7.89 nm,荧光量子产率为14%。最大激发波长为320 nm,最大发射波长为386 nm。Hg²⁺存在条件下N-CQDs溶液的荧光被猝灭(关),添加百草枯后猝灭的荧光被恢复(开)。通过N-CQDs/Hg²⁺体系设计了荧光"关-开"方法,在最佳条件下,百草枯在0.05~1.0μg/mL范围内具有良好的线性,线性方程为ΔF=92.41X+123.31(R²=0.9989),检出限为16μg/L,加标回收率为95.3%~104.4%,RSD<3.8%。以鸡毛为原料制备的高选择性和灵敏性的荧光"关-开"探针方法可有效检测实际样品中的百草枯。     

锂离子电池正极材料Fe3+掺杂Li1+xV3O8的制备与电化学性能

采用柠檬酸辅助的溶胶-凝胶法制备了Fe^3＋掺杂Li1.1Fe0.05V2．95O8及对比样品LiV3O8正极材料．使用TG—DTA、XRD、FT-IR等手段表征了正极材料的物理化学特性，并采用EIS、恒电流充放电等手段研究了其电化学性能．结果表明：Fe^3＋掺杂LiV3O8与对比LiV3O8相比，能在更低的温度下晶化，能在相同温度、相同时间煅烧下保持更小的晶粒度．Li1.1Fe0.05V2．95O8与对比LiV308相比，特别是大电流下的放电容量有较大的提高，在75mA·g^-1，197mA·g^-1，373mA·g^-1及重新回到75mA·g^-1电流下的初始放电容量分别是307mAh·g^-1，237mAh·g^-1．162mAh·g^-1和302mAh·g^-1．在回复到75mA·g^-1电流后放电容量能非常稳定保持在278．6mAh·g^-1左右，并同时给出了初步的理论解释．     

Three‐dimensional vortex simulation of unsteady flow in hydraulic turbines

On the basis of the Helmholtz decomposition, a grid‐free numerical scheme is provided for the solution of unsteady flow in hydraulic turbines. The Lagrangian vortex method is utilized to evaluate the convection and stretch of the vorticity, and the BEM is used to solve the Neumann problem to define the potential flow. The no‐slip boundary condition is satisfied by generating vortex sticks at the solid surface. A semi‐analytical regularization technique is applied to evaluate the singular boundary surface integrals of the potential velocity and its gradients accurately. The fast multipole method was extended to evaluate the velocity and velocity gradients induced by the discretized vortex blobs in the Lagrangian vortex method. The successful simulation for the unsteady flow through a hydraulic turbine's runner has manifested the effectiveness of the proposed method. Copyright © 2011 John Wiley & Sons, Ltd.     

Vulnerability analysis of interdependent infrastructure systems: A methodological framework

Infrastructure systems such as power and water supplies make up the cornerstone of modern society which is essential for the functioning of a society and its economy. They become more and more interconnected and interdependent with the development of scientific technology and social economy. Risk and vulnerability analysis of interdependent infrastructures for security considerations has become an important subject, and some achievements have been made in this area. Since different infrastructure systems have different structural and functional properties, there is no universal all-encompassing ‘silver bullet solution’ to the problem of analyzing the vulnerability associated with interdependent infrastructure systems. So a framework of analysis is required. This paper takes the power and water systems of a major city in China as an example and develops a framework for the analysis of the vulnerability of interdependent infrastructure systems. Four interface design strategies based on distance, betweenness, degree, and clustering coefficient are constructed. Then two types of vulnerability (long-term vulnerability and focused vulnerability) are illustrated and analyzed. Finally, a method for ranking critical components in interdependent infrastructures is given for protection purposes. It is concluded that the framework proposed here is useful for vulnerability analysis of interdependent systems and it will be helpful for the system owners to make better decisions on infrastructure design and protection.     

煤与稻杆共液化性能研究

通过与神府煤和稻杆单独热解和液化的对比,研究了神府煤与生物质稻杆的共热解和共液化行为,考察和揭示了两者之间的协同作用。热重分析表明,稻杆的热解温度较低,在与神府煤共热解时,由于在较低温度下稻杆热解形成的自由基对煤热解的促进作用,使得混合物实际的热解失重高于对应的加权平均计算结果。共液化结果表明,神府煤与稻杆之间存在着明显的协同效应,并因液化反应条件的不同而不同。在较高的液化反应温度和较长的反应时间,由于煤本身的热解速率增加,系统内供氢能力的不足导致逆向缩合反应速率增加,减弱了两者的协同效应。在实验条件范围内,当稻杆配入量为50%,在400℃,60min的反应条件下,神府煤与稻杆共液化时产生的协同效应最大。此时,共液化转化率和正己烷可溶物分别高于对应加权平均计算值的14.8%和9.7%,气体产率也同时降低了2.6%。     

由不同镍盐前体制备高分散Ni/SBA-15催化剂：活化氛围的影响

以硝酸镍和乙酸镍为镍前体,用浸渍法分别在空气和氢气氛围活化制得系列Ni/SBA-15催化剂,通过XRD、H₂-TPD、N₂物理吸附和在线质谱等物理化学手段对催化剂进行了表征,并结合微型高压反应釜萘加氢反应,评价了催化剂的加氢性能。结果表明,氢气氛围活化对硝酸镍为镍前体所制Ni/SBA-15催化剂的镍分散度和活性有显著促进作用,而空气氛围活化对乙酸镍为镍前体所制催化剂有明显促进作用。根据催化剂前体在不同氛围活化时的热分解产物,提出了活化氛围对不同镍前体制得Ni/SBA-15催化剂所产生的作用机理。     

神府煤与稻杆共热溶研究

研究了神府煤与稻杆在1-甲基萘溶剂中不同温度下的共热溶行为。相对神府煤,稻杆单独热溶时具有更高的热溶率,表明其具有较好的热溶活性。但稻杆的热溶过程中产生大量的挥发性气体,导致其热溶率和热溶物产率之间的较大差异。神府煤单独热溶时,其热溶率与热溶物产率之间的差异相对较小。神府煤与稻杆的共热溶表明,两者之间存在协同效应,并且该协同效应受温度的影响显著。在热溶温度为320~340 ℃时,对热溶物产率而言具有正的协同效应,也即其热溶物产率的实验值大于通过神府煤与稻杆单独热溶时热溶物产率经质量加权平均计算得到的理论值。在研究的热溶温度范围内,共热溶的热溶率实验值均低于质量加权平均的理论计算值。相对于理论计算值,在320 ℃时热溶物产率的实验值增加达到最大,为7.9%。此外,通过对热溶物的性质表征,还进一步探讨了共热溶过程中的协同作用机理。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.