Totally geodesic Riemannian foliations with locally symmetric leaves

We prove the arithmeticity of totally geodesic Riemannian foliations, with a dense leaf, on complete finite volume Riemannian manifolds when the leaves are isometrically covered by an irreducible symmetric space of noncompact type and rank at least 2. To cite this article: R. Quiroga-Barranco, C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Inductively-coupled plasma/atomic emission spectrometry of sulfur with a vacuum scanning spectrometer and its application to the analysis of coal liquefaction catalysts

Inductively-coupled plasma/atomic emission spectrometry with a high-resolution vacuum scanning monochromator is described for the determination of sulfur at 180.734 nm. The behavior of the signal-to-background ratio is investigated as functions of RF power, argon gas flow rate and observation height above the load coil. Under the operating conditions selected, the detection limit is 3 μg l^?1. The Se I 196.090-nm line is chosen as internal standard, because the S/Se line pair exhibited the least change with carrier gas flow rate and acid concentration of solution. Sulfur in NiMo and CoMo/ Al₂O₃ catalysts used for coal liquefaction is determined as S(II) and S(VI) species. The total amount of the species agreed well with the sulfur value obtained by the conventinal combustion method.     

Electron Probe Microanalysis of HfO2 Thin Films on Conductive and Insulating Substrates

Quantitative electron probe microanalysis of highly insulating materials is a complicated problem, partially solved by coating samples with grounded thin conductive layers or using novel scanning electron microscopy (SEM) techniques, such as low-voltage and/or variable pressure SEM. In this work, some problems of quantitative X-ray microanalysis of thin HfO₂ films, in particular the possibility to determine mass thickness correlated to the density of the layer material, are discussed. For comparison, Al₂O₃, Ta₂O₅ and TiO₂ films grown onto both semiconductive Si and insulating quartz substrates were also analysed. All the films studied were synthesized by atomic layer deposition method.     

Polyfluorothiolate derivatives of rhodium(I). Crystal and molecular structure of [Rh(μ-SC6HF4)(C8H12)]2

Summary The thiolato-bridged dinuclear compounds [Rh(-SR)-(COD)]₂, where R=p-C₆HF₄ (1),p-C₆H₄F (2) and CF₃ (3), are obtained from the chloro-bridged analogue by ligand exchange.Compound (1) crystallizes in the space group P₁ with a=9.740(3)Å, b=11.642(4)Å, c=13.997(6)Å, =103.87(3)°, =106.98(3)° and =105.10(2)°; z=2. In this dinuclear molecule both Rh atoms have a square planar coordination sharing one edge, namely the two sulphur bridging atoms. The Rh—Rh separation of 2.96 Å is consistent with at most a very weak metal-metal interaction. Upon addition of CO the dimeric [Rh(-SR)(CO)₂]₂ (4), (5) and (6) are obtained, but addition of PPh₃ affords the monomeric species [Rh(SR)(PPh₃)-(COD)] (7), (8) and (9). Reactions of the dimeric tetracarbonyl derivatives with PPh₃ vary with the nature of R; [Rh(-SR)(PPh₃)(CO)]₂ is obtained when R=p-C₆H₄F (10) and CF₃ (11) but monomeric [Rh(SR)-(PPh₃)(CO)₂] (12) is produced when R=p-C₆HF₄. The latter mononuclear compounds, with R=p-C₆H₄F (13) and CF₃ (14), are also formed by reaction of [Rh(SR)-(PPh₃)(COD)] with CO.     

Evolution of self-assembled silica-tetrapropylammonium nanoparticles at elevated temperatures

The time evolution of silica nanoparticles in solutions of tetrapropylammonium (TPA) has been studied using a combination of small-angle scattering, conductivity, and pH measurements to provide the first comprehensive analysis of nanoparticle structural and compositional changes at elevated temperatures. We have found that silica-TPA nanoparticles subjected to hydrothermal treatment (70-90 degrees C) grow via an Ostwald ripening mechanism with growth rates that depend on both pH and temperature. Small-angle X-ray (SAXS) and neutron (SANS) scattering confirm that the core-shell structure of the particles, initially present at room temperature, is maintained during heating, but an evolution toward sphericity is evidenced especially at high values of pH. SAXS absolute intensity calculations were utilized to calculate the changes in nanoparticle composition and concentration over time. These changes along with the conductivity and pH measurements and SANS contrast matching studies indicate that, upon heating, TPA becomes embedded in the core of nanoparticles giving rise to more zeolitic-looking nanomaterials.     

Direct, two-step synthetic pathway to novel dibenzo[a,c]phenanthridines

Novel dibenzo[a,c]phenanthridines are prepared regioselectively by the application of a straightforward synthetic pathway, starting from new 3,4-diaryl- and 3,4-dihydro-3,4-diarylisoquinolines prepared via Ritter-type heterocyclization and the more classical two-step reductive amination/Bischler-Napieralski cyclization of triarylethanones, respectively. A comparative study of nonphenolic oxidative coupling methodologies provides a highly efficient procedure, based on the hypervalent iodine reagent phenyliodine(III) bis(trifluoroacetate) (PIFA), to accomplish the final coupling step.     

An advantageous route to oxcarbazepine (trileptal) based on palladium-catalyzed arylations free of transmetallating agents

[reaction: see text] A new route to oxcarbazepine (Trileptal), the most widely prescribed antiepileptic drug, starting from commercially available 2'-aminoacetophenone and 1,2-dibromobenzene, is reported. The sequentially accomplished key steps are palladium-catalyzed intermolecular alpha-arylation of ketone enolates and intramolecular N-arylation reactions. After several experiments to establish the best conditions for both arylation processes, the target oxcarbazepine is obtained in a satisfactory overall yield, minimizing the number of steps and employing scalable catalytic procedures developed in partially aqueous media.     

Autonomous intelligent agents for accelerated materials discovery

We present an end-to-end computational system for autonomous materials discovery. The system aims for cost-effective optimization in large, high-dimensional search spaces of materials by adopting a sequential, agent-based approach to deciding which experiments to carry out. In choosing next experiments, agents can make use of past knowledge, surrogate models, logic, thermodynamic or other physical constructs, heuristic rules, and different exploration–exploitation strategies. We show a series of examples for (i) how the discovery campaigns for finding materials satisfying a relative stability objective can be simulated to design new agents, and (ii) how those agents can be deployed in real discovery campaigns to control experiments run externally, such as the cloud-based density functional theory simulations in this work. In a sample set of 16 campaigns covering a range of binary and ternary chemistries including metal oxides, phosphides, sulfides and alloys, this autonomous platform found 383 new stable or nearly stable materials with no intervention by the researchers.

We present an end-to-end computational system for autonomous materials discovery.     

Kinetic investigation of the reactions of S-4-nitrophenyl 4-substituted thiobenzoates with secondary alicyclic amines in aqueous ethanol

The reactions of S-4-nitrophenyl 4-X-substituted thiobenzoates (X = H, Cl, and NO(2): 1, 2, and 3, respectively) with a series of secondary alicyclic amines (SAA) were subjected to a kinetic investigation in 44 wt % ethanol-water, at 25.0 degrees C and an ionic strength of 0.2 M (KCl). The reactions were followed spectrophotometrically by monitoring the release of 4-nitrobenzenethiolate anion at 420-425 nm. Under excess amine, pseudo-first-order rate constants (k(obsd)) are obtained for all reactions. The plots of k(obsd) vs [SAA] at constant pH are linear with the slope (k(N)) independent of pH. The statistically corrected Br?nsted-type plots (log k(N)/q vs pK(a) + log p/q) for the reactions of 1 and 2 are nonlinear with slopes at high pK(a), beta(1) = 0.27 and 0.10, respectively, and slopes at low pK(a), beta(2) = 0.86 and 0.84, respectively. The Br?nsted curvature is centered at pK(a) (pK(a)(0)) 10.0 and 10.4, respectively. The reactions of SAA with 3 exhibit a linear Br?nsted-type plot of slope 0.81. These results are consistent with a stepwise mechanism, through a zwitterionic tetrahedral intermediate (T(+/-)). For the reactions of 1 and 2, there is a change in rate-determining step with amine basicity, from T(+/-) breakdown to products at low pK(a), to T(+/-) formation at high pK(a). For the reactions of 3, breakdown to products of T(+/-) is rate limiting for all the SAA series (pK(a)(0) > 11). The increasing pK(a)(0) value as the substituent in the acyl group becomes more electron withdrawing is attributed to an increasing nucleofugality of SAA from T(+/-). The greater pK(a)(0) value for the reactions of SAA with 1, relative to that found in the pyridinolysis of 2,4-dinitrophenyl benzoate (pK(a)(0) = 9.5), is explained by the greater nucleofugality from T(+/-) of the former amines, compared to isobasic pyridines, and the greater leaving ability from T(+/-) of 2,4-dinitrophenoxide relative to 4-nitrobenzenethiolate.