DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。     

Uniqueness of Solution to Systems of Elliptic Operators and Application to Asymptotic Synchronization of Linear Dissipative Systems II: Case of Multiple Feedback Dampings

In this paper, the authors consider the asymptotic synchronization of a linear dissipative system with multiple feedback dampings. They ?rst show that under the observability of a scalar equation, Kalman’s rank condition is su?cient for the uniqueness of solution to a complex system of elliptic equations with mixedobservations. The authors then establish a general theory on the asymptotic stability and the asymptotic synchronization for the corresponding evolutional system subjected to mixed dampings of various natures. Some classic models are presented to illustrate the ?eld of applications of the abstract theory.     

Interaction of ultrashort pulses with molecules and solids: Physics and applications

The interaction of ultrashort laser pulses with molecules and solids is an extremely complex area of science research encompassing the fields of physics, chemistry, and materials science. The physics of interaction has been fairly understood over the last couple of decades and, consequently, several applications have been envisaged from these interactions in the fields of photonics, lithography, biomedicine, sensing, telecommunications etc. In the present article we describe three different components of interaction of ultrashort pulses with matter: (1) with liquid molecules/thin films wherein we present the results from our studies of optical nonlinearities predominantly using picosecond and femtosecond pulses, (2) with molecules/solids wherein plasma generated from the surface was studied for applications in understanding the molecular dynamics and towards identifying high-energy molecules and (3) within the bulk and on the surface of solids (e.g. glasses, bulk polymers and metals) resulting in micro- and nanostructures. Different applications resulting from such interactions in photonics and microfluidics are presented and discussed.     

基于双功能单体的磁性双酚A印迹聚合物的制备及应用

以二氧化硅包覆的四氧化三铁为载体,双酚A(BPA)为模板分子,β-环糊精和4-乙烯基吡啶为二元功能单体,采用热聚合方法制备了对双酚A具有特异吸附性能的磁性印迹复合材料(mag-MIPs).采用透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)和振动样品磁强计(VSM)对该印迹复合材料进行了表征,并结合磁固相萃取(M-SPE)技术和高效液相色谱(HPLC)研究了其对双酚A的吸附行为,结果表明该印迹复合材料对双酚A具有良好的选择吸附能力.液相色谱检测结果表明,该磁性印迹复合材料可用于环境水样中双酚A的快速分离富集,回收率为90.51%~98.21%.     

新型N-杂环取代查尔酮衍生物的合成

以4-二甲氨基苯甲醛与4'-氟苯乙酮为原料,经羟醛缩合反应制得4-二甲氨基-4'-氟查尔酮(1);1分别与咪唑、哌嗪等含氮杂环化合物经取代反应合成了6个新型的N-杂环取代查尔酮衍生物,其结构经1H NMR,13C NMR和IR表征。     

Stress characterization of elastodynamics with continuously distributed defects

A pure stress formulation of linear nonhomogeneous anisotropic elastodynamics with continuously distributed defects (EcDD) is proposed, and well known solutions of ECDD corresponding to stationary and moving concentrated plastic fields in an infinite body are recovered by direct integration of the stress field equation. A new interpretation of the solutions is given.     

用自制仪器精确测定变温液体的粘滞系数

介绍了用恒流法自制仪器精确测定液体的粘滞系数.该自制仪器,能有效地保证底部的密封性、液体水位恒定和可操作性,还增设一个玻璃管连通器,附加一根标尺和游标使液体水位的测量精确度提高.并在接毛细管输出液体的量筒处加上光电计使测量液体流速的精确度提高,采用该仪器测定了水和乙醇两种液体在变温条件下的粘滞系数,经实验比对,所测得结果与理论值能较好地吻合.同时设计了可调换不同管径的毛细管,能快速准确地测量多种变温液体的粘滞系数.     

环形激光陀螺随机误差测试中的计数误差

详细讨论了环形激光陀螺（RLG）误差测试中的计数误差。首先提出了在角度随机游走为主要误差源的情况下，RLG的离散输出模型。在假设累积角度量化误差为白噪声的前提下推导了方差（或AIlan方差）分析中的量化误差模型。接着指出白噪声假设并不总能成立，特别是对于由计数器只能计整数引致的量化误差（特称为“计数误差”），由于量化间隔很大，这一假设通常不能成立。最后，给出了一种白噪声假设不能成立时的处理方法及仿真数据分析结果。     

高密度B炸药的燃烧转爆轰实验研究

采用电探针及压力传感器测试技术对密度为1.597 g/cm3的固体B炸药（TNT/RDX=40/60）的燃烧转爆轰性能进行研究。实验结果表明,在较强的约束条件下（45号钢管,内径20 mm,外径64 mm,长500 mm）,B炸药形成了DDT现象,诱导爆轰距离为295~310 mm。