Enantiospecific synthesis of isomers of AES, a new environmentally friendly chelating agent

Three four-step enantiospecific syntheses of different diastereomers of AES, a new biodegradable chelating agent, are described. The stereocenters in each of the isomers are accessible from l- and d-malic and aspartic acids.     

The effect of water or salt solution on thin hydrophobic films

Hydrophobic films of polystyrene synthesized in bulk (PS) and by emulsion polymerization in the presence of the cationic surfactant cetyltrimethylammonium bromide (PS-CTAB) or the anionic surfactant sodium dodecyl sulfate (PS-SDS) were characterized by means of ellipsometry, contact angle measurements, and atomic force microscopy. Thin (approximately 65 nm) and thick (approximately 300 nm) films were spin-coated on hydrophilic silicon wafers. PS films presented scarcely tiny holes, while PS-CTAB and PS-SDS films presented holes and protuberances. The former were attributed to dewetting effects and the latter to surfactant clusters. The films were exposed to water or to a 0.1 mol/L NaCl solution for 24 h. Ex situ measurements evidenced strong topographic alterations after the exposure to the fluid. A model based on the diffusion of water (or electrolyte) molecules to the polymer/silcon dioxide interface through holes or defects on the film edges was proposed to explain the appearance of wrinkles and protuberances. In situ ellipsometric measurements were performed and compared with simulations, which considered either a water layer between a polymer and a silcon dioxide layer or an air layer between a polymer and water (medium). In the case of thin PS films, the ellipsometric angles evidenced a very thin (0.5-1.0 nm) air layer between water and the PS films. Upon increasing the PS film thickness, no air layer could be observed by ellipsometry. Regardless of the thickness, the ellipsometric data obtained for PS-CTAB and PS-SDS films did not indicate the presence of an air layer between them and the aqueous media. The dramatic changes in the topography of PS, PS-CTAB, and PS-SDS after immersion in salt solution were explained with proposed models. From a practical point of view, this study is particularly relevant because many hydrophobic polymers are used as substrates for biomedical purposes, where the physiological ionic strength is 0.15 mol/L NaCl.     

Trace analysis of heavy metals in high purity materials by helium-3 activation analysis

A method is described to determine traces of V, Fe, Ni, Zn, Nb and Mo in high purity matrices of niobium, tantalum and tungsten by non-destructive 14 MeV³He activation analysis. The influence of nuclear and γ-ray interferences in the determination of these elements is discussed.     

Über Struktur und Aktivität der den H2O2-Zerfall katalysierenden Cu2+-Komplexe. V. Vergleich der katalytischen Aktivität der Cu2+-Komplexe isomerer β-Hydroxythiophen-Derivate. Mettallionen und H2O2, 9. Mitteilung

The catalytic properties in H₂O₂ decomposition of the Cu²⁺-chelates of 2- Acetyl-3-hydroxy-thiophene (I) and 3-Acetyl-4-hydroxy-thiophene (II) have been investigated. Evidence is given that the catalytic activity of the chelates is a function of the respective bond orders of the α, β (I) and β, β′ (II) thiophene bonds of the chelate ring.     

Extent of exchange of bromine-82 with bromamine-T in strong acid medium

The extent of exchange of bromine-82 with bromamine-T in strong acid medium is low due to the formation of at lower acid concentrations and bromine at higher acidities. formation occurs over a narrow acid concentration range and is less stable than .     

Reactions of quaternized imidazo-quinazoline and-pyridopyrimidine with active methylene compounds

Summary Syntheses of 1-methylimidazo[1,2-c]quinazolinium iodide (3) and 1-methylimidazo[2,1-f]pyrido[3,2-d]pyrimidinium iodide (4) are described. These tricyclic compounds react with nucleophiles derived from active methylene compounds to give the corresponding open-chain enamines.

---

Reaktionen von quaternisierten Imidazo-Chinazolinen und -Pyridopyrimidinen mit Verbindungen mit reaktiven Methylengruppen

Zusammenfassung Synthesen von 1-Methylimidazo[1,2-c]chinazoliniumjodid (3) und 1-Methylimidazo[2,1-f]pyrido[3,2-d]pyrimidiniumjodid (4) werden beschrieben. Diese tricyclischen Verbindungen reagieren mit einigen Carbanionen aus Verbindungen mit reaktiven Methylengruppen, wobei die offenkettigen Enamine entstehen.

     

State-transition structures in physics and in computation

In order to establish close connections between physical and computational processes, it is assumed that the concepts of state and of transition are acceptable both to physicists and to computer scientists, at least in an informal way. The aim of this paper is to propose formal definitions of state and transition elements on the basis of very low level physical concepts in such a way that (1) all physically possible computations can be described as embedded in physical processes; (2) the computational aspects of physical processes can be described on a well-defined level of abstraction; (3) the gulf between the continuous models of physics and the discrete models of computer science can be bridged by simple mathematical constructs which may be given a physical interpretation; (4) a combinatorial, nonstatistical definition of information can be given on low levels of abstraction which may serve as a basis to derive higher-level concepts of information, e.g., by a statistical or probabilistic approach. Conceivable practical consequences are discussed.     

Alnumycins A2 and A3: new inverse-epimeric pairs stereoisomeric to alnumycin A1

Two new pairs of stereoisomeric alnumycin As, A2 {(2)-(1R,1′RS,4′SR,5′SR)} and A3 {(2)-(1R,1′RS,4′SR,5′RS)}, are described. Similar to alnumycin A1 {(2)-(1R,1′RS,4′RS,5′SR)}, each of these naturally occurring compounds is also a pair of C-1 inverse epimers. The relative configurations of the dioxane ring sidechains were assigned on the basis of ¹H NMR NOE contacts and molecular modeling using density functional theory (DFT) at the M06-2X/6-31G(d) level of theory. The absolute configurations of C-1 and the determination of inverse epimeric relationships were achieved by experimental electronic circular dichroism (ECD) measurements, with both aspects confirmed by using the chiral derivatizing agent (CDA) Mosher′s acid chloride {α-methoxy-α-trifluorophenylacetyl chloride (MTPACl)} to effect enantiodifferentiation. The absolute configurations of the dioxane ring using the CDA could only be effected in the case of alnumycin A1, the results of which were in agreement with previous assignments. The dioxane ring conformational mobility and the likely interaction between the MTPA groups coupled with the structural novelty of the diols in the dioxane ring with respect to CDA analysis precluded an absolute configuration assignment for alnumycins A2 and A3 based on empirical comparisons or by computational analysis of through-space NMR shieldings (TSNMRS) emanating from the phenyl groups of the MTPA moieties.     

Physical properties (thermal,thermomechanical, magnetic,and adhesive) of some smart orthodontic wires

Thermal, thermomechanical, and caloric properties of commercial orthodontic wires (produced by Natural Orthodontics Corp., USA) with cylindrical and rectangular geometry were studied. Depending on the applied forces, there were identified the range of elasticity, the elasticity–viscoelasticity coexistence domain and the domain in which a maximum force of 18 N is applied, for the orthodontic wires. When increasing the thickness of orthodontic wires, deformation decreases. The Controlled Force Module, in the tension mode, was used for the determination of the orthodontic wires elongation at application of the stretching forces from 0 to 13 N, at 35 °C, maintaining each static force value for 3 min. The increase in the cross-sectional area of the orthodontic wires disfavors the process of elongation of the sample, at the same applied static force. Using the Multi-Frequency–Strain–Stress modulus, in the tension mode, DMA cyclic heating–cooling measurements were performed. The measured physical quantities for orthodontic wires were Storage Modulus, Loss Modulus, Tanδ and Stiffness, at heating and cooling. Thus, the characteristic temperatures of the phase transitions (A_s, A_f, M_s, M_f), of all the studied orthodontic wires were identified. Also, the values of the elasticity modulus (Young’s Modulus) of the orthodontic wires were calculated at 35 °C. With the DSC Q200 device, using temperature-modulated differential scanning calorimetry method, a multi-step temperature variation program, was applied to a rectangular wire, in three stages (cooling–heating–cooling). Through the interpretation of heat fluxes (reversible, irreversible and total), the phase transitions in the formation of martensite, austenite, but also of the rombohedral phase (R-phase), were identified. Formations of austenite and martensite were also evidenced by the classical DSC method, but the classical DSC method also enabled the R-phase identification. The adherence of some food dyes on the orthodontic wires, as well as the modification of the surface roughness of the orthodontic wire after the deposition of the food dye, was also studied. By magnetic measurements, it was established that the orthodontic wires had paramagnetic properties at room temperature, and nitinol was a mixture of 49.2% austenite and 50.8% martensite.