Stress distribution caused by two neighboring out-of-plane locally cophasally curved fibers in a composite material

In the present paper, within the framework of a piecewise homogenous body model, with the use of the exact three-dimensional equations of elasticity theory, a method proposed earlier is developed for investigating the stress distribution caused by two neighboring out-of-plane locally cophasally curved fibers located along two parallel planes in an infinite elastic body. The body is loaded at infinity by uniformly distributed normal forces in the direction of fiber location. The self-equilibrated normal and shear stresses caused by the curved fibers are analyzed, and the influences of interaction between the fibers and of the geometric nonlinearity on the distribution of these stresses are studied. Numerical results for this interaction are obtained.     

Increasing the crystallite and conductivity of polypyrrole with dopant used

The chemical polymerization method is very convenient for obtaining a plurality of the polymer. Chemical synthesizes of polypyrrole (PPy) were performed in acetonitrile solutions containing different dopants: dodecylbenzene sulphonic acid (DBSA), tetrafluoroborate (BF₄ ^?), perchlorate (ClO₄ ^?) and oxalate (C₂O₄ ^2?). These polymers were characterized by using scanning electron microscopy (SEM), ultraviolet–visible (UV–Vis) spectrophotometer, Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) techniques and dry conducting measurement. It was observed that the interactions between the polymers and dopant materials are completely different from each other. As a result of this interaction, the conductivities and crystal structures of PPy are also different from each other. Results in this work showed that the dopants used affected both electrical conductivities and crystal structures of PPy.     

Synthesis and determination of pKa values of some new 3,4-disubstituted-4,5-dihydro-1H-1,2,4-triazol-5-one derivatives in non-aqueous solvents

3-Alkyl(Aryl)-4-amino-4,5-dihydro-1H-1,2,4-triazol-5-ones (2) reacted with 2-furoyl chloride and thiophene-2-carbonyl chloride to afford the corresponding 3- alkyl(aryl)-4-(2-furoylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (3) and 3-alkyl(aryl)- 4-(2-thienylcarbonylamino)-4,5-dihydro-1H-1,2,4-triazol-5-ones (4), respectively. The new compounds synthesized were characterized by using IR, 1H-NMR, 13C-NMR and UV spectral data together with elemental analysis. In addition, to investigate the effects of solvents and molecular structure upon acidity, compounds 3 and 4 were titrated potentiometrically with tetrabutylammonium hydroxide in four non-aqueous solvents (isopropyl alcohol, tert-butyl alcohol, N,N-dimethylformamide and acetonitrile). The half-neutralization potential values and the corresponding pKa values were determined for all cases.     

Determination of Folic Acid by CE in Various Cultivated Variety of Lentils

A simple extraction and determination method for folic acid (FA) in lentil samples was developed employing capillary electrophoresis. The analysis was performed in a 75 μm ID fused silica capillary using a running buffer of 10 mM sodium borate (10%, v/v, methanol, pH 9) at +18 kV and a detection wavelength at 200 nm. Methylparaben was used as the internal standard. FA signal response was linear in the range between 1.2 × 10^?5 and 4.8 × 10^?5 M. Limit of detection (inter-day) was determined at 6.12 × 10^?7 M (3.3 σs^?1). The amount of FA found in green, red and mignon lentils was found to range between 0.408 and 0.742 mg g^?1.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Vapochromic behavior of polycarbonate films doped with a luminescent molecular rotor

We report on vapochromic films suitable for detecting volatile organic compounds (VOCs), based on polycarbonate (PC) doped with 4‐(triphenylamino)phthalonitrile (TPAP), a fluorescent molecular rotor sensitive to solvent polarity and viscosity. PC films of variable thickness (from 20 up to 80 µm) and containing small amounts of TPAP (0.05 wt%) were prepared and exposed to a saturated atmosphere of different VOCs. TPAP/PC films showed a gradual decrease and red‐shift of the emission during the exposure to solvents with high polarity index and favorable interaction with the polymer matrix such as THF, CHCl₃, and acetonitrile. In the case of the most interacting solvents (THF and CHCl₃), TPAP/PC films also showed a fluorescence increase at longer exposure times, as a consequence of an irreversible, solvent‐induced crystallization process of the polymeric matrix. The vapochromism of TPAP/PC films is rationalized on the basis of alterations of the rotor intramolecular motion upon solvent uptake by PC and polarity effects of the microenvironment. Interestingly, the fluorescence response of the TPAP/PC films shows a non‐trivial, tuneable dependence on film thickness during the second solvent‐exposure stage. The latter effect is attributed to a variable extent of the crystallization process occurring in the PC films. This observation promptly suggests, in turn, an effective procedure to modulate the spectroscopic response in such functionalized polymeric materials through the precise control of the film thickness. Copyright © 2015 John Wiley & Sons, Ltd.     

Dirac field in topologically massive gravity

We consider a Dirac field coupled minimally to the Mielke–Baekler model of gravity and investigate cosmological solutions in three dimensions. We arrive at a family of solutions which exists even in the limit of vanishing cosmological constant.     

Modeling of Tarsus-Adana-Gaziantep highway-induced noise pollution within the scope of Adana city and estimated the affected population

The purpose of this study is, via employing SoundPLAN 7.3 software, to model the noise pollution that Tarsus-Adana-Gaziantep (TAG) Highway passing through Adana city induces in Adana city center and to designate the ratio of population exposed to the noise. The study was executed in an area extending from a 17 km-route of TAG Highway passing through Adana city center and 1900.62 ha area that surrounding 500 m north and 500 m south directions of this particular route.     

Estimating the population utility function: A parametric Bayesian approach

In this paper we consider the health utility index mark II for quantifying and describing a population’s health related quality of life over health states composed of multiple attributes. This measure can be used for various purposes such as evaluating the severity of the effect of a disease or comparing different treatment methods. We present a Bayesian framework for population utility estimation and health policy evaluation by introducing a probabilistic interpretation of the multi-attribute utility theory (MAUT) used in health economics. In doing so, our approach combines ideas from the MAUT and Bayesian statistics and provides an alternative method of modeling preferences and utility estimation.     

A sensitive and rapid determination of ranitidine in human plasma by HPLC with fluorescence detection and its application for a pharmacokinetic study

A novel precolumn derivatization reversed-phase high-performance liquid chromatography method with fluorescence detection is described for the determination of ranitidine in human plasma. The method was based on the reaction of ranitidine with 4-fluoro-7-nitrobenzo-2-oxa-1,3-diazole forming yellow colored fluorescent product. The separation was achieved on a C(18) column using methanol-water (60:40, v/v) mobile phase. Fluorescence detection was used at the excitation and emission of 458 and 521 nm, respectively. Lisinopril was utilized as an internal standard. The flow rate was 1.2 mL/min. Ranitidine and lisinopril appeared at 3.24 and 2.25 min, respectively. The method was validated for system suitability, precision, accuracy, linearity, limit of detection, limit of quantification, recovery and robustness. Intra- and inter-day precisions of the assays were in the range of 0.01-0.44%. The assay was linear over the concentration range of 50-2000 ng/mL. The mean recovery was determined to be 96.40 ± 0.02%. This method was successfully applied to a pharmacokinetic study after oral administration of a dose (150 mg) of ranitidine.