Mg-catalyzed one-pot preparation of benzimidazoles and spirooxindoles by an immobilized chlorophyll b on magnetic nanoparticles

Chlorophyll b was extracted from Heliotropium europaeum plant, then immobilized on magnetic nanoparticles (Fe₃O₄@SiO₂@Chl-Mg) and found as an efficient and green catalyst for the preparation of a variety of benzimidazoles and spirooxindoles in mild conditions. The catalyst was fully characterized by Fourier-transform infrared (FTIR), ultraviolet–visible (UV–vis) spectroscopy, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric (TGA), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and dynamic light scattering (DLS) analyses. To prove the catalytic influence of Mg over the reactions, the catalytic activity of the demetalated chlorophyll b as well as some other control experiments was investigated. High to excellent yields were achieved for all entries, whether benzimidazole or spirooxindole derivatives at short reaction times. The catalyst could be recovered and reused for several consecutive runs by a simple external magnetic field without any considerable reactivity loss. The properties of the recovered catalyst were investigated by various analyses. Finally, the reasonable mechanisms were proposed for the reactions based on the literature.     

Novel halogenated cyclopentasilylene-2,4-dienes via DFT

In view of immense importance of silylenes and the fact that their properties undergo significant changes on substitution with halogens, here, we have used B3LYP/6-311++G** level of theory to access the effects of 1–4 halogens (X = F, Cl, Br, and I) on four unprecedented sets of cyclopentasilylene-2,4-dienes; with the following formulas: SiC₄H₃X ( 1 _X ), SiC₄H₂X₂ ( 2 _X ), SiC₄HX₃ ( 3 _X ), and SiC₄X₄ ( 4 _X ). In going down from F to I, the singlet (s)-triplet (t) energy gap (ΔE_s-t, a possible indication of stability), and band gap (ΔE_H-L) decrease while nucleophilicity (N), chemical potential (μ), and proton affinity (PA) increase. The overall order of N, μ, and PA for each X is 2 _X > 1 _X > 3 _X > 4 _X . Precedence of 2 _X over 1 _X is attributed to the symmetric cross conjugation in the former. The highest and lowest N are shown by 2 _I and 4 _F . The trend of divalent angle () for each X is 4 _X > 1 _X > 3 _X > 2 _X . The results show that in going from electron withdrawing groups (EWGs) to electron donating groups (EDGs), the ΔE_s-t and ΔE_H-L decrease while N, μ, and PA increase. Also, rather high N of our scrutinized silylenes may suggest new promising ligands in organometallic chemistry.     

New monodentate and bidentate silylene ligands by DFT

Considering the importance of silylene ligands in transition metal-mediated catalytic reactions, we have scrutinized eight novel monodentate ( 1 – 4 ) and bidentate ( 1 ^′ - 4 ^′ ) derivatives of 2,5-diX-cyclopentasilylene-2,4-dienes (X = NH₂, OH, PH₂, and SH), at M06/6-311++G** level of theory. To probe the complexation ability of our scrutinized silylene ligands with Rh atom ( 1 _Rh - 4 _Rh and 1 ^′ _Rh - 4 ^′ _Rh , respectively), thermodynamic and structural parameters such as complexation energy (ΔE_Com), singlet-triplet energy gap (ΔE_s-t), bond length, along with NBO and atoms in molecules analyses are provided. In going from less electron donating groups (EDGs) to more EDGs (NH₂ > OH > PH₂ > SH), the σ -donor strength and ligand flexibility increase. Structures 1 and 1 ^′ turn out as the most nucleophilic species for showing the highest nucleophilicity (N = 5.47 and 5.40 eV, respectively). Furthermore, they exhibit the highest proton affinity values (PA = 271.46 and 271.23 kcal/mol, respectively). The results indicate that bidentate coordination mode of silylene leads to a stronger Si-Rh complex. The overall orders of σ -donation ability for monodentate and bidentate silylene ligands are 1 > 2 > 3 > 4 and 1 ^′ > 2 ^′ > 3 ^′ > 4 ^′ , respectively.     

Development and validation of high-performance liquid chromatography method for determination of clarithromycin in pharmaceutical tablets

Clarithromycin is a very important macrolide antibiotic used to treat bacterial infections in human and veterinary medicine. This study reports the development and validation of cost-effective, simple, precise, accurate, and robust high-performance liquid chromatography (HPLC) for the determination of clarithromycin (CLA) in tablets. Reversed-phase chromatography was conducted using a standard column at 55°C with ultraviolet detection at 215 nm. A mobile phase consisting of acetonitrile –2-methyl-2-propanol –potassium phosphate buffer was used at a flow rate of 1.0 mL/min. The proposed method displayed good linearity, precision, accuracy, robustness, and specificity. The present HPLC was compared with capillary electrophoresis and bioassay methods and the results indicated that there was no significant difference between these methods. Moreover, the obtained results demonstrated the validity of the isocratic HPLC, which allows reliable quantitation of CLA in pharmaceutical samples. Thus, it can be used as a substitute alternative methodology for the routine quality control of this medicine, in situations where other methods are less accessible in the laboratory.     

Selective synthesis of copper microsheets and ultralong microwires via a surfactant assisted hydrothermal process

The surfactant assisted hydrothermal process for selective preparation of copper nanosheets and ultralong microwires by reducing Cu²⁺ with 2-(bis-phosphonomethylamino)propionic acid (dpc) under the action of cetyltrimethylammonium bromide (CTAB) or polyvinyl pyrrolidine (PVP) is presented. X-ray powder diffraction (XRD) and energy dispersive X-ray analysis (EDX) indicate that the products are pure Cu of cubic phase. The effects of starting material concentration and reaction time on morphology of nanosheets have been studied by scanning electron microscopy (SEM). The presence of CTAB and PVP as capping agents is identified by EDX, transmission electron microscopy (TEM) and FT-IR. The possible growth process for ultralong microwires was studied by stopping the growth at a series of intermediate morphology stages based on SEM observations. Optical properties of Cu nanosheets and ultralong microwires were studied by UV-Vis spectrophotometry.     

Two manganese(II) coordination polymers driven by (iso)nicotinoyl-hydrazone blocks and pseudohalide ancillary ligands: syntheses,structural features,and magnetic properties

Two coordination polymers, [Mn₂(μ-L¹)₂(μ-N₃)₂]_n (1) and [Mn(μ-HL²)(SCN)₂]_n (2), were assembled in a single-pot from MnCl₂·4H₂O, HL¹ (2-acetylpyridine isonicotinoylhydrazone) or HL² (2-acetylpyridine nicotinoylhydrazone) and ancillary ligand sources (NaN₃ or NH₄NCS). The products were fully characterized, including by single-crystal X-ray diffraction, which revealed a 2-D metal–organic layer in 1 and a 1-D zigzag coordination chain in 2. Both 1 and 2 are constructed from six-coordinate Mn(II) nodes that adopt distorted octahedral (MnN₅O) environments; the adjacent nodes are driven by the μ-L¹ and μ-N₃ linkers in 1 or μ-HL² linkers in 2 to form different metal–organic networks. Their topological classification was performed, disclosing the hcb and 2C1 topology in 1 and 2, respectively. Different weak non-covalent interactions promote dimensionality extension. Variable-temperature magnetic susceptibility measurements were carried out, revealing weak ferromagnetic and antiferromagnetic interactions in 1 and 2, respectively.     

Lignin as a Partial Polyol Replacement in Polyurethane Flexible Foam

This study was focused on evaluating the suitability of a wide range of lignins, a natural polymer isolated from different plant sources and chemical extractions, in replacing 20 wt.% of petroleum-based polyol in the formulation of PU flexible foams. The main goal was to investigate the effect of unmodified lignin incorporation on the foam’s structural, mechanical, and thermal properties. The hydroxyl contents of the commercial lignins were measured using phosphorus nuclear magnetic resonance (³¹P NMR) spectroscopy, molar mass distributions with gel permeation chromatography (GPC), and thermal properties with differential scanning calorimetry (DSC) techniques. The results showed that incorporating 20 wt.% lignin increased tensile, compression, tear propagation strengths, thermal stability, and the support factor of the developed PU flexible foams. Additionally, statistical analysis of the results showed that foam properties such as density and compression force deflection were positively correlated with lignin’s total hydroxyl content. Studying correlations between lignin properties and the performance of the developed lignin-based PU foams showed that lignins with low hydroxyl content, high flexibility (low T_g), and high solubility in the co-polyol are better candidates for partially substituting petroleum-based polyols in the formulation of flexible PU foams intended for the automotive applications.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Experimental and theoretical investigation of CO2 and air bubble rising velocity through kerosene and distilled water in bubble column

This paper concerns with developing of parameters which influence terminal velocities of air and CO₂ bubbles in distilled water and kerosene pools. The objective of this study is to validate and correct the formulas that were developed by previous investigators for prediction of terminal velocities. The investigation revealed that the terminal velocity of a single rigid spherical bubble in Newtonian fluids can be developed by balancing of mechanical forces acting on the bubble. However, for large bubbles, because of deforming of the bubble which is a result of interfacial tension, the effect of surface tension should be considered in the terminal velocity prediction formula. By using PSO algorithm and plotting experimental data of terminal velocity against the size of gas bubbles, the suitable equation for each of systems was chosen. Results showed that Jamialahmadi model is more practical for terminal velocity prediction. Jamialahmadi model requires a modification to be utilized for air-kerosene, CO₂-kerosene, air- distilled water and CO₂-distilled water systems. The developed PSO algorithm model is accurate for prediction of experimental data with an average R² value of 0.9722.