The Landscape of the Spiked Tensor Model

We consider the problem of estimating a large rank-one tensor u ^⊗k ∈ (ℝⁿ)^⊗k , k ≥ 3 , in Gaussian noise. Earlier work characterized a critical signal-to-noise ratio λ  _Bayes = O(1) above which an ideal estimator achieves strictly positive correlation with the unknown vector of interest. Remarkably, no polynomial-time algorithm is known that achieved this goal unless λ ≥ Cn^{(k − 2)/4} , and even powerful semidefinite programming relaxations appear to fail for 1 ≪ λ ≪ n^{(k − 2)/4} . In order to elucidate this behavior, we consider the maximum likelihood estimator, which requires maximizing a degree-k homogeneous polynomial over the unit sphere in n dimensions. We compute the expected number of critical points and local maxima of this objective function and show that it is exponential in the dimensions n , and give exact formulas for the exponential growth rate. We show that (for λ larger than a constant) critical points are either very close to the unknown vector u or are confined in a band of width Θ(λ^{−1/(k − 1)}) around the maximum circle that is orthogonal to u . For local maxima, this band shrinks to be of size Θ(λ^{−1/(k − 2)}) . These “uninformative” local maxima are likely to cause the failure of optimization algorithms. © 2019 Wiley Periodicals, Inc.     

Certification of nitrate in spinach powder reference material SPIN-1 by high-precision isotope dilution GC–MS

A high-precision exact-matching quadruple isotope dilution method (ID⁴MS) was employed for the quantitation of nitrate in an air-dried spinach powder Certified Reference Material (CRM). The analyte was extracted in hot water following addition of ¹⁵NO\({}_{3}^{-}\) internal standard. The blend was then treated with sulfamic acid to remove nitrite and with triethyloxonium tetrafluoroborate to promote aqueous conversion of nitrate into volatile EtONO₂. The derivative was analyzed by headspace GC–MS with 3-min elution time. The method performance was validated with a series of tests which demonstrated adequate selectivity and ruggedness. This method supported the development of novel SPIN-1 CRM giving a modest contribution to its uncertainty (u_char = 0.85%). With respect to previous attempts, the SPIN-1 was proven stable, homogeneous (u_hom = 0.44%), and suitable for spinach monitoring under EU regulations. On dried basis, the nitrate content of SPIN-1 was found to be 22.53 ± 0.43 mg/g (U_c = 1.9%, k = 2). The material was also used in an inter-laboratory study where four laboratories employed a total of ten measurement methods.

SPIN-1 Certified Reference Material for nitrate in spinach powder

     

The Effect of Calcium-Silicate Cements on Reparative Dentinogenesis Following Direct Pulp Capping on Animal Models

Dental pulp vitality is a desideratum for preserving the health and functionality of the tooth. In certain clinical situations that lead to pulp exposure, bioactive agents are used in direct pulp-capping procedures to stimulate the dentin-pulp complex and activate reparative dentinogenesis. Hydraulic calcium-silicate cements, derived from Portland cement, can induce the formation of a new dentin bridge at the interface between the biomaterial and the dental pulp. Odontoblasts are molecularly activated, and, if necessary, undifferentiated stem cells in the dental pulp can differentiate into odontoblasts. An extensive review of literature was conducted on MedLine/PubMed database to evaluate the histological outcomes of direct pulp capping with hydraulic calcium-silicate cements performed on animal models. Overall, irrespective of their physico-chemical properties and the molecular mechanisms involved in pulp healing, the effects of cements on tertiary dentin formation and pulp vitality preservation were positive. Histological examinations showed different degrees of dental pulp inflammatory response and complete/incomplete dentin bridge formation during the pulp healing process at different follow-up periods. Calcium silicate materials have the ability to induce reparative dentinogenesis when applied over exposed pulps, with different behaviors, as related to the animal model used, pulpal inflammatory responses, and quality of dentin bridges.     

A Generalization of the Univalence on the Boundary Theorem with Applications to Sobolev Mappings

We give a generalization of a known theorem from classical complex analysis, namely the univalence on the boundary theorem. We apply this result to obtain some univalence conditions for Sobolev mappings \(f\in C({\overline{D}},{\mathbb {R}}^n)\bigcap W_{loc}^{1,q}(D,{\mathbb {R}}^n)\) which are injective on \(\partial D\), in connection with a known result of Ball from (Proc R Soc Edinb Sect A 88(3–4):315–328, 1981) modeling nonlinear elasticity.     

Metal-Free Arylation of Benzothiophenes at C4 by Activation as their Benzothiophene S-Oxides

Benzothiophenes, activated by oxidation to the corresponding S-oxides, undergo C−H/C−H-type coupling with phenols to give C4 arylation products. While an electron-withdrawing group at C3 of the benzothiophene is important, the process operates without a directing group and a metal catalyst, thus rendering it compatible with sensitive functionalities—e.g. halides and formyl groups. Quantum chemical calculations suggest a formal stepwise mechanism involving heterolytic cleavage of an aryloxysulfur species to give a π-complex of the corresponding benzothiophene and a phenoxonium cation. Subsequent addition of the phenoxonium cation to the C4 position of the benzothiophene is favored over the addition to C3; Fukui functions predict that the major regioisomer is formed at the more electron-rich position between C3 and C4. Varied selective manipulation of the benzothiophene products showcase the synthetic utility of the metal-free arylation process.     

A Combined Experimental and Computational Study of Chrysanthemin as a Pigment for Dye-Sensitized Solar Cells

The theoretical study of chrysanthemin (cyanidin 3-glucoside) as a pigment for TiO₂-based dye-sensitized solar cells (DSSCs) was performed with the GAUSSSIAN 09 simulation. The electronic spectra of neutral and anionic chrysanthemin molecules were calculated by density functional theory with B3LYP functional and DGDZVP basis set. A better energy level alignment was found for partially deprotonated molecules of chrysanthemin, with the excited photoelectron having enough energy in order to be transferred to the conduction band of TiO₂ semiconductor in DSSCs. In addition, we used the raw aqueous extracts of roselle (Hibiscus sabdariffa) calyces as the source of chrysanthemin and the extracts with various pH values were tested in DSSCs. The extracts and photosensitized semiconductor layers were characterized by UV-Vis spectroscopy, and DSSCs based on raw extracts were characterized by current density-voltage measurements.     

Isoflavonoid-Antibiotic Thin Films Fabricated by MAPLE with Improved Resistance to Microbial Colonization

Staphylococcus aureus (Gram-positive) and Pseudomonas aeruginosa (Gram-negative) bacteria represent major infectious threats in the hospital environment due to their wide distribution, opportunistic behavior, and increasing antibiotic resistance. This study reports on the deposition of polyvinylpyrrolidone/antibiotic/isoflavonoid thin films by the matrix-assisted pulsed laser evaporation (MAPLE) method as anti-adhesion barrier coatings, on biomedical surfaces for improved resistance to microbial colonization. The thin films were characterized by Fourier transform infrared spectroscopy, infrared microscopy, and scanning electron microscopy. In vitro biological assay tests were performed to evaluate the influence of the thin films on the development of biofilms formed by Gram-positive and Gram-negative bacterial strains. In vitro biocompatibility tests were assessed on human endothelial cells examined for up to five days of incubation, via qualitative and quantitative methods. The results of this study revealed that the laser-fabricated coatings are biocompatible and resistant to microbial colonization and biofilm formation, making them successful candidates for biomedical devices and contact surfaces that would otherwise be amenable to contact transmission.     

Boundary behaviour of the mappings satisfying generalized inverse modular inequalities

We study the geometric properties of the mappings for which generalized inverse modular inequalities hold. We generalize in this way known theorems from the theory of analytic mappings and the theory of quasiregular mappings, like the theorems of Fatou, M. and F. Riesz, Beurling and Lindelöf and their extensions given for quasiregular mappings by Martio, Rickman and Vuorinen.     

Highly Efficient Copper(II) Ion Sorbents Obtained by Calcium Carbonate Mineralization on Functionalized Cross‐Linked Copolymers

A new type of Cu^II ion sorbents is presented. These are obtained by CaCO₃ mineralization from supersaturated solutions on gel‐like cross‐linked polymeric beads as insoluble templates. A divinylbenzene–ethylacrylate–acrylonitrile cross‐linked copolymer functionalized with weakly acidic, basic, or amphoteric functional groups has been used, as well as different initial inorganic concentrations and addition procedures for CaCO₃ crystal growth. The morphology of the new composites was investigated by SEM and compared to that of the unmodified beads, and the polymorph content was established by X‐ray diffraction. The beads, before and after CaCO₃ mineralization, were tested as sorbents for Cu^II ions. The newly formed patterns on the bead surface after Cu^II sorption were observed by SEM, and the elemental distribution on the composites and the chemical structure of crystals after interaction with Cu^II were investigated by EDAX elemental mapping and by FTIR‐ATR spectroscopy, respectively. The sorption capacity increased significantly after CaCO₃ crystals growth on the weak anionic bead surface (up to 1041.5 mg Cu^II/g sample) compared to that of unmodified beads (491.5 mg Cu^II/g sample).