Two- and three-dimensional comparative study of heat transfer and pressure drop characteristics of nanofluids flow through a ventilated cubic cavity (part I: Newtonian nanofluids)

Journal of Thermal Analysis and Calorimetry - Through this paper, three-dimensional fluid flow and heat transfer of Al2O3 nanofluid within ventilated enclosures was taken into consideration....     

Application of differential electrolytic potentiometry for detection in flow injection analysis

The applicability of differential electrolytic potentiometry as a detection system in flow injection analysis is investigated. A computer-controlled injector which delivers precise volumes of sample solutions in a reproducible manner was developed. Conditions such as current density employed, the concentrations of the solutions used and the flow rate were optimized. Chloride in water was determined by means of this system. The relation between chloride concentration and the measured signal was found to be Nernstian for solutions of concentrations above 6 μg ml⁻¹ chloride. For solutions below this concentration, the relation is linear.     

Equivalences of comodule categories for coalgebras over rings

In this article we defined and studied quasi-finite comodules, the cohom functors for coalgebras over rings. Linear functors between categories of comodules are also investigated and it is proved that good enough linear functors are nothing but a cotensor functor. Our main result of this work characterizes equivalences between comodule categories generalizing the Morita-Takeuchi theory to coalgebras over rings. Morita-Takeuchi contexts in our setting is defined and investigated, a correspondence between strict Morita-Takeuchi contexts and equivalences of comodule categories over the involved coalgebras is obtained. Finally, we proved that for coalgebras over QF-rings Takeuchi's representation of the cohom functor is also valid.     

Synthesis,dynamic light scattering,and luminescence properties of copolymers containing iridium(III) bisterpyridine in the side chain

Supramolecular block‐random copolymers containing [Ir(terpy)₂]³⁺ in the side chain were synthesized via postfunctionalization of a P(S‐b‐AC_terpy) block copolymer. Absorbance and emission spectra compared to a model compound show that the polymer backbone has a minor effect on the polymer absorbance but produces a larger shift for the phosphorescence signals to higher wavelength. Dynamic light scattering of the metal complex containing copolymer studied in various solvents showed monomodal aggregation with decreasing aggregate size as the solvent dielectric constant increased. The copolymer precursor P(S‐b‐AC_terpy) shows multimodal aggregation in different solvents with the major population consisting of single chains. This difference in behavior between the two polymers is attributed to the electrolytic nature of the complex and the amphiphilicity induced by the charged metal complex. Supramolecular copolymers like these will continue to have interesting self‐organizational properties and may find applications in multicomponent systems for photoinduced charge separation processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1109–1121, 2007     

Eigenvalue Spectrum of a Dirac Particle in Static and Spherical Complex Potential

It has been observed that a quantum theory need not be Hermitian to have a real spectrum. We study the non-Hermitian relativistic quantum theories for many complex potentials, and obtain the real relativistic energy eigenvalues and corresponding eigenfunctions of a Dirac-charged particle in complex statically and spherically symmetric potentials. Complex Dirac–Eckart, complex Dirac–Rosen–Morse II, complex Dirac–Scarf and complex Dirac–Poschl–Teller potential are investigated.     

A Note on an Input Control Model of a Predictive Regression Interval

A well-known problem of prediction in linear regression models is to find a confidence interval for the random value of the dependent variable when the values of the independent variables are given. Such a situation may arise in economic quality control models when the independent variables are costly inputs and the dependent variable is some measure of quality or production. In such a circumstance, an important control objective may be to find values for the inputs that will maximize the lower limit of the prediction confidence interval for a fixed budget, or alternatively, to minimize the cost of the inputs for a fixed lower limit of the confidence interval. In this paper, we shall show that global optima can be found using known algorithms. The special case of simple linear regression is discussed and an illustrative example is provided.     

Heat transfer and flow induced by both natural convection and vibrations inside an open-end vertical channel

The effects of oscillatory motions that may present at a wall during vibrating conditions are studied on flow induced by natural convection and heat transfer inside an open-end vertical channel. The governing equations are non-dimensionalized and reduced to simpler forms. Analytical solutions are obtained for several limiting cases. The reduced governing equations are solved for various values of the controlling parameters. It is found that mean values of average Nusselt numbers are mainly affected by the Grashof number and the amplitude of the horizontal vibrations. Further, amplitudes of Nusselt numbers at the vibrated wall are decreased as the Grashof number increases for horizontal vibrations while they are increased as amplitudes of vibrations increase. It is also found that the squeezing/vibrational Reynolds number, Grashof number and amplitudes of vibrations have a great influence on the trends of stream lines and isotherms especially at low Grashof numbers. Finally, correlations that summarize the effects of the different controlling parameters are determined on the Nusselt numbers and their amplitudes at relatively low frequency of vibrations.     

An Enhancement of the Drezner—Wesolowsky Algorithm for Single-Facility Location with Maximin of Rectilinear Distance

In this note, we examine the algorithm of Drezner and Wesolowsky for locating a facility with maximin rectilinear distance to a given set of demand points. The concept of the closest-point constraint is introduced as a technique for increasing the efficiency of the algorithm. This potential increase in efficiency is demonstrated by an example.     

Electronic communication through the ureylene bridge: spectroscopy, structure and electrochemistry of dimethyl 1,1-ureylenedi(1-ferrocenecarboxylate)

Dimethyl 1^′,1^′-ureylenedi(1-ferrocenecarboxylate) (1) formed during the synthesis of 1-amino, 1^′-ferrocenecarboxylic acid shows virtual molecular centrosymmetry. Electronic coupling between the two Fc groups through the ureylene bridge results in both Fc groups being individually oxidizable (ΔE_1/2?0.14 V). The possible existence of intermolecular electronic communication has discussed. The oxidation was followed by spectroelectrochemistry. The separation between the two halfwave potentials ΔE_1/2=137±5 mV and the comproportionation constant K_c=207.     

Time-weighted average sampling of volatile and semi-volatile airborne organic compounds by the solid-phase microextraction device

The ultimate goal of the chemist is to perform sample preparation, and analysis, if possible at the place where a sample is located rather than moving the sample to laboratory, as is common practice in many cases at the present time. This approach eliminates errors and time associated with sample transport and storage and therefore it would result in more accurate, precise and faster analytical data. In addition to portability, two other important features of ideal field sample preparation technique are elimination of solvent use and integration with a sampling step. A method is developed which addresses these requirements for the determination of time-weighted average concentration of gas phase compounds using a solid-phase microextraction device. Quantification of target analytes in air using this method can be carried out without external calibration. The volatile and semi-volatile organic compounds in air diffuse into the fiber coating which is retracted a known distance into its needle housing during the sampling period. The coatings used are poly(dimethylsiloxane) and poly(dimethylsiloxane)-divinylbenzene. The sampling rate at which gas phase analytes load onto the fiber is determined for a wide range of hydrocarbons. There is a good agreement between the theoretical and experimental sampling rates. Sampling time ranges from 1 min to 24 h depending on the coating used and its retraction distance. Effect of the flow-rate on the uptake rate by the fiber is studied. The method is tested in the field and compared with National Institute of Occupational Health and Safety Method 1550. Good agreement between the results is obtained.