Reactivity of urethanes at high temperature: Transurethanization and side reactions

The reactivity of urethanes based on 1,6‐hexamethylene diisocyanate (HDI) and 4,4′‐methylene diphenyl diisocyanate (MDI) was investigated at temperatures between 190 °C and 235 °C. Diurethane model compounds end‐capped with either 1‐dodecanol (D‐core‐D) or 1‐hexadecanol (H‐core‐H) were mixed and annealed at high temperature. The core was either MDI or HDI. The transurethanization reaction was followed based on the formation of the compounds (H‐core‐D). The amount of H‐core‐D and of side products, which had formed after variable annealing times, were identified with ¹H NMR, FTIR, SEC, and MALDI‐TOF. Transurethanization was considerably faster for MDI‐based urethanes than for HDI‐based urethanes. Only traces of side products were formed during annealing of MDI‐based urethanes, whereas a significant amount of allophanates was formed from HDI‐based urethanes under the same conditions. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 621–629     

Indeno[1,2‐b]fluorene‐Based [2,2]Cyclophanes with 4n/4n and 4n/[4n+2] π Electrons: Syntheses,Structural Analyses,and Excitonic Coupling Properties

Indeno[1,2‐b]fluorene‐based [2,2]cyclophanes with 4n/4n and 4n/[4n+2] π‐electron systems were prepared, and their structures were identified by X‐ray crystallography. With short π–π distances around 3.0 Å, [2.2](5,11)indeno[1,2‐b]fluorenophane and its precursor [2.2](5,11)indeno[1,2‐b]fluorene‐6,12‐dionophane exhibit remarkable transannular interactions, leading to their unusual electrochemical and photophysical properties. With the aid of femtosecond transient absorption spectroscopy, the transition from the monomeric excited state to the redshifted H‐type dimeric state was first observed, correlating to the calculated excitonic energy splitting and the steady‐state absorption spectra induced by charge‐transfer‐mediated superexchange interaction.     

Protection of Li metal anode by surface-coating of PVDF thin film to enhance the cycling performance of Li batteries

The PVDF thin film on the surface of the lithium metal can highly suppress the lithium dendrites.     

可获得高分辨率谱线信息的新型太阳极紫外成像仪

极紫外光谱观测和诊断是研究太阳大气基本物理过程的最重要手段之一。但因为波长短，很多可见光仪器的设计方案不再适用，且极紫外观测只能在太空中开展。国际上现有卫星上的太阳极紫外成像仪和光谱仪都有各自的不足，比如极紫外成像仪不能获得高光谱分辨率的谱线信息；狭缝式光谱仪通过扫描可得到活动区域的信息，但扫描时间过长，对于研究剧烈变化的太阳活动有很大的局限性。这些不足制约了对日冕物质抛射(CME)和耀斑等太阳活动的高精度观测及对其机理的研究：无法看到CME在内日冕的加速过程，而且无法将可见光看到的CME现象同极紫外看到的日面源区直接联系；缺少观测目标的视向速度信息，难以识别CME的触发过程。采用多级衍射成像方式的一种新型太阳极紫外成像仪，除实现传统极紫外成像仪功能外，还可以在太阳活动变化过程中同步获得全日面各区域的光谱信息。新型成像仪可以得到高光谱分辨率数据，用于反演低日冕的等离子体视向速度，获得全日面的速度分布，与同时得到的高空间分辨率图像相结合，可以识别太阳活动现象对应的物质运动, 为空间科学研究提供数据；因为没有狭缝和运动部件，可以实现对大视场的太阳活动区域的高时间分辨率成像，有利于捕捉日面活动的快速变化。新型成像仪采用无狭缝光谱分光成像的设计理念，即同一时间把一定光谱带宽的信息记录到一个二维的图像上，此过程可以看成是从某一个角度将空间和光谱数据立方体投影到一个面上，然后再利用反演得到空间分辨图像和光谱信息。多级光谱成像的光学设计与传统光谱仪最大的不同是其不存在逐行扫描的狭缝，这使得其能够同时获得大视场内太阳的空间信息和光谱信息。因为极紫外波段的特殊性，以及本仪器面向卫星遥感应用，不可能像可见光波段或者医用CT机一样实现很多衍射级的同时成像。因此，新型极紫外成像仪光学系统由反射镜、色散光栅和五个探测器组成，入射的太阳极紫外辐射经过光栅色散后分别由五个级次的探测器接收，其中四个探测器分部接收±1和±2衍射级图像，另外一个接收0级图像。空间信息可以直接从0级图像得到，而光谱信息则需要根据五个级次成像的反演结果得出。介绍了光学系统的设计以及反演算法，并分析了反演算法的误差。光路基于变间距光栅设计，可实现空间分辨率1.8 arcsec·pixel-1, 光谱分辨率7.8×10-3 nm·pixel-1，同时减小了体积和重量，适合空间应用。     

高光谱成像的土壤剖面水分含量反演及制图

传统土壤水分的获取方法仅可获得离散的土壤水分点位数据，难以获得剖面上精细且连续的水分含量分布图。研究了野外条件下利用近红外高光谱（882～1 709 nm）成像反演剖面土壤水分含量（SMC），并实现精细制图的可行性。研究剖面位于江苏省东台市，我们利用近红外高光谱成像仪对剖面进行了5天原位连续观测，共采集了280个土样用于烘干法测定SMC。原始高光谱图像经数字量化值（DN）校正、黑白校正、拼接、几何校正、剪切和掩膜等一系列预处理后，提取各采样点的平均光谱反射率。提取光谱（Raw）经吸光度[LOG₁₀(1/R)]，Savitzky-Golay平滑（SG）、一阶微分（FD）、二阶微分（SD）、多元散射校正（MSC）和标准正态变量（SNV）转换后，采用偏最小二乘回归（PLSR）和最小二乘支持向量机（LS-SVM）方法建立SMC预测模型，并对比分析不同光谱预处理方法与建模方法组合条件下SMC的预测精度。结果表明，光谱反射率随SMC增加逐渐降低，不同光谱预处理方法的预测精度有所差异，除MSC方法外，同一光谱预处理方法的LS-SVM模型预测精度均高于PLSR模型，并且基于LOG₁₀(1/R)光谱的LS-SVM模型对SMC预测精度最高，其建模集的决定系数（R2_c）和均方根误差（RMSE_c）分别为0.96和0.65%，预测集的决定系数（R2_p）、均方根误差（RMSE_p）和相对分析误差（RPD_p）分别为0.88，1.05%和2.88。利用最优模型进行剖面SMC的高空间分辨率精细制图，通过比较SMC反演图中提取的预测值与实测值关系发现预测精度较高（R2: 0.85～0.95, RMSE: 0.94%～1.02%），且两者在剖面中的变化趋势基本一致，说明SMC反演图不仅能很好地反映出土壤水分在整个剖面中毫米级的含量分布信息，也可反映出同一位置处不同天数间的含量差异。因此，利用近红外高光谱成像结合优化的预测模型，能够实现土壤剖面SMC的定量预测及精细制图，有助于快速、有效监测田间剖面土壤水分状况。     

Enhanced Activity and Substrate Specificity by Site-Directed Mutagenesis for the P450 119 Peroxygenase Catalyzed Sulfoxidation of Thioanisole

P450 119 peroxygenase was found to catalyze the sulfoxidation of thioanisole and the sulfonation of sulfoxide in the presence of tert-butyl hydroperoxide (TBHP) for the first time with turnover rates of 1549 min⁻¹ and 196 min⁻¹ respectively. Several mutants were designed to improve the peroxygenation activity and thioanisole specificity by site-directed mutagenesis. The F153G/T213G mutant gave an increase of sulfoxide yield and a decrease of sulfone yield. Moreover the S148P/I161T/K199E/T214V mutant and the K199E mutant with acidic Glu residue contributed to improving the product ratio of sulfoxide to sulfone. Addition of short-alkyl-chain organic acids to the P450 119 peroxygenase-catalyzed sulfur oxidation of thioanisole was investigated. Octanoic acid was found to induce a preferred sulfoxidation of thioanisole catalyzed by the F153G/T213G mutant to give approximately 2.4-fold increase in turnover rate with a k_cat value of 3687 min⁻¹ relative to that of the wild-type, and by the F153G mutant to give the R-sulfoxide up to 30 % ee. The experimental control and the proposed mechanism for the P450 119 peroxygenase-catalyzed sulfoxidation of thioanisole in the presence of octanoic acid suggested that octanoic acid could partially occupy the substrate pocket; meanwhile the F153G mutation could enhance the substrate specificity, which could lead to efficiently regulate the spatial orientation of thioanisole and facilitate the formation of Compound I. This is the most effective catalytic system for the P450 119 peroxygenase-catalyzed sulfoxidation of thioanisole.     

Preparation,rheological and drag reduction properties of hydrophobically associating polyacrylamide polymer

Hydrophobically associating polymer (HAMDP) was synthesized by using acrylamide, acrylic acid, 2-acrylamido-2-methylpropane sulfonic acid and dodecyl 2-methylacrylate as main monomers. Dynamic rheometer and self-made simulation evaluation apparatus were used to test the rheological and drag reduction properties of HAMDP. With the mass concentration increased, the apparent viscosity of HAMDP increased. The critical aggregation concentration was 2.29g/L. With the changement of the strain, the elastic modulus was larger than viscous modulus. With the increment of HAMDP, the area of thixotropic loop increased. Compared with commercial polyacrylamide, the drag reduction rate of HAMDP could be up to 62.38%.