The synthesis of iron–nickel alloy nanoparticles using a reverse micelle technique

Nanosized Fe_0.2Ni_0.8 particles were prepared by reducing their salts with sodium borohydride (NaBH₄) in cationic water-in-oil (w/o) microemulsions of water/cetyl-trimethyl-amonium bromide (CTAB) and n-butanol/isooctane at 25 °C. According to the TEM and X-ray diffraction analyses, the synthesized particles were around 4–12 nm in size. Due to their nanodimensions, the particles had a primitive cubic (pc) structure rather than the body-centered cubic (BCC) structure of the bulk material. An examination of the synthesis from the reverse micelle reveals that the morphology of the iron–nickel alloy nanoparticles depends mainly on the microemulsion's composition. The magnetization of the nanoparticles was much lower than that of the bulk material, reflecting the influence of the nanodimensions on the particles’ magnetizations.     

Flips and the Hilbert scheme over an exterior algebra

We study the tangent space at a monomial point M in the Hilbert scheme that parameterizes all ideals with the same Hilbert function as M over an exterior algebra.     

Smooth polynomial expansions of piecewise-differentiable functions

This paper proposes an extension of the expansions of analytic functions in the A_n polynomials defined by Adomian [1] to consider piecewise-differentiable functions.     

Uniqueness and continuous dependence on the initial data for a class of non-linear shallow shell problems

This note is concerned with the non-linear shallow shell model introduced in 1966 by W.T. Koiter, and later studied by M. Bernadou and J.T. Oden. We show the uniqueness of the solution to the dynamical model and that this solution is continuous with respect to the initial data. To cite this article: J. Cagnol et al., C. R. Acad. Sci. Paris, Ser. I 342 (2006).     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Thin-Layer Chromatography with an Isolated Support and Forced Flow of the Mobile Phase

JPC – Journal of Planar Chromatography – Modern TLC -     

Effect of the rhenium additive to VOx/TiO2 and MoOx/TiO2 catalysts on their properties in oxidative dehydrogenation of propane

VO_x/TiO₂ and MoO_x/TiO₂ catalysts with the addition of Re (Re/V or Mo = 0.5) were synthetized and tested in oxidative dehydrogenation of propane and in reduction by propane. XPS measurements showed depletion of the surface in Re. The Re additive does not affect the total conversion of propane, but increases the selectivity to propene. The effect is more pronounced for the MoO_x/TiO₂ catalyst. The increase in the selectivity to propene is accompanied with the increase in the reducibility of the catalysts.     

Synthesis of 3-hexahelicenol and its transformation to 3-hexahelicenylamines,diphenylphosphine, methyl carboxylate,and dimethylthiocarbamate

A nonphotochemical synthetic route to 3-hexahelicenol is reported. It involves a key [2+2+2] cycloisomerization of CH(3)O-substituted triyne that is readily available from 1-methoxy-3-methylbenzene and 1-bromo-2-(bromomethyl)naphthalene. Further functional group transformations led to 3-CO(2)CH(3), 3-NH(2), 3-PPh(2), and 3-SC(O)N(CH(3))(2) substituted hexahelicenes.