HPLC with amperometric detection for the determination of pesticides of high polarity

A relatively simple procedure is described for the selective and highly sensitive determination of amitrole (3-amino-1,2,4-triazole) by ionpair HPLC with amperometric detection. The separation was achieved on a polar CN-column using hexane, propanol, water (62:36:2) with LiClO₄ (2.5 g·l^–1) and trichloroacetic acid (2 g·l^–1) as electrolytes. The determination range lies between 500 pg and 500 ng and the limit of detection was found to be 200 pg (s.d.: 11%; N=9). The minimum detectability for the alternative UV-monitoring was 2.5 ng. The developed method may be helpful in production and quality control and for the selective determination of amitrole in commercial formulations.     

Characteristic behavior of macro-, semimicro- and microelectrodes in voltammetric and chronoamperometric measurements

The advantages of microelectrodes such as the improvement of signal-to-noise ratio, the ability to perform electrochemical measurements in high resistive solutions and small RC-time constants give the possibility of an extended use for voltammetric and chronoamperometric techniques in analytical chemistry. In this comparative study, the microelectrode properties of three selected electrodes were examined. The characterization of a RAM-microarray electrode, an epoxy-impregnated carbon electrode and a conventional glassy carbon macroelectrode was performed by cyclic voltammetry at different scan rates, by DP-voltammetric measurements using different concentrations of supporting electrolyte and by transient measurements. It could be shown, that in comparison to the microarray electrode and to the glassy carbon macroelectrode, respectively, the results obtained by using the epoxy-impregnated carbon electrode are caused by its semimicroelectrode character.     

Adsorption voltammetric techniques for the determination of uranium(VI) with 2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone as complex forming reagent

Uranium (VI) can be determined by adsorptive voltammetric techniques, as its chloranilic acid complex, over a wide concentration range. Differential pulse polarography is useful for quantification of uranium between 0.1 and 1.5 mg/l; for the range from 10 to 500 g/l differential pulse voltammetry and for ultra-trace analysis between 0.024 and 40 g/l adsorptive stripping voltammetry are preferred. The standard deviation for the 3-detection limit of 24 ng/l uranium was found to be 8%. In the trace analysis of metals in aquatic environmental systems by adsorptive stripping voltammetry it is normally necessary to decompose polluted water samples by UV irradiation or microwave digestion. The advantage of the developed method is the fact that no sample pretreatment is necessary.Dedicated to Professor R. Geyer on the occasion of his 80th birthday     

Synthesis and an X-ray structure of soluble phenylacetylene macrocycles with two opposing bipyridine donor sites

The synthesis of the shape-persistent macrocycles 10a and 10b with two bipyridine units in opposing sides by Hagihara/Sonogashira cross-coupling chemistry of suitably functionalized building blocks is reported. X-ray analysis of single crystals of 10b shows a layered structure with channels filled with solvent molecules and parts of the flexible chains. with which the cycle is decorated for solubility reasons.     

Are 1,5-disubstituted semibullvalenes that have C2v equilibrium geometries necessarily bishomoaromatic?

Unrestricted density functional theory (UB3LYP), CASSCF, and CASPT2 calculations have been employed to compute the relative energies of the C(s) and C(2v) geometries of several 1,5-disubstituted semibullvalenes. Substitution at these positions with R = F, -CH(2)-, or -O- affords semibullvalenes that are predicted to have C(2v) equilibrium geometries. Calculated singlet-triplet energy splittings and the energies of isodesmic reactions are used to assess the amount of bishomoaromatic character at these geometries. The results of these calculations show that employing strain to destabilize the C(s) geometries of semibullvalenes can lead to a significant decrease in the amount of bishomoaromatic stabilization of the C(2v) geometries, due to reduced through-space interaction between the two allyl groups. However, the C(2v) equilibrium geometries of the 1,5-disubstituted semibullvalenes with R = F and -RR- = -O- do benefit from stabilizing through-bond interactions between the two allyl groups. These interactions involve mixing of the bisallyl HOMO with the low-lying C-F or C-O sigma orbital combinations of the same symmetry. In contrast, for -RR- = -CH(2)-, through-bond interactions destabilize the bisallyl HOMO and are predicted to make the ground state of this semibullvalene a triplet.     

Polarographisches Verhalten von Pesticiden mit Organohalogenbindungen

Summary The dp-polarographic behaviour of different pesticides with carbon-halogen bonds was investigated in dimethylsulfoxide and methanol/water as solvents; the peak-potentials are demonstrated graphically. From peak-height the pesticides are detectable up to 100 ng · ml^–1. The investigations are of interest for the development of multistage-combined procedures by h.p.l.c. with amperometric detection.

---

---

Herrn Prof. Dr. R. Neeb zum 60. Geburtstag gewidmet     

Determination of polycyclic aromatic hydrocarbons in water samples using high-performance liquid chromatography with amperometric detection

The determination of polycyclic aromatic hydrocarbons (PAHs) using high-performance liquid chromatography (HPLC) with UV and fluorescence detection has been well established. Although most of the PAHs can be detected by these methods, some environmentally important polyaromatic compounds, such as acenaphthylene, do not show fluorescence and can only be determined by UV detection at higher concentrations. A sensitive and selective determination of acenaphthylene, acenaphthene and the six PAHs listed in the TVO, the German drinking water standard, is also possible by amperometric detection following HPLC separation. The method was applied to the determination of PAHs in different water samples after solid-phase extraction (SPE). The efficiency of the amperometric determination was found to be superior to UV detection (λ = 300 nm).     

Polarographisches Verhalten der C2-Halogenkohlenwasserstoffe

Summary Investigations on the polarographic and voltammetric behaviour of organic halogen compounds were carried out in order to obtain information on the redox properties and how to develop determination and detection methods. In this second report the dp-polarographic behaviour of the halogen substituted C₂-compounds has been studied in different supporting electrolytes and in various solvents. The electrode processes are discussed and the possibilities for the polarographic determination of the C₂-halogen hydrocarbons. The detection limit is 0.25 g · ml^–1 and the linear current-concentration relationship is observed up to 25 g · ml^–1. A simple and rapid method is proposed for the dp-polarographic determination of 1,2-dibromoethane in gasoline; the relative standard deviation for 20 g · ml^–1 is ±1.8%.