Fabrication of Nano Flower‐shaped Platinum on Glassy Carbon Electrode as a Sensitive Sensor for Lead Electrochemical Analysis

Platinum nanoflowers modified glassy carbon electrodes (PtNFs/GCE) was fabricated simply for lead determination in water samples. The modified electrodes were prepared by electrodeposition in hexachloroplatinic acid solution at constant potential. The influence of deposition time and potential on surface morphology, chemical composition, electrochemical properties of electrode were investigated. At ?0.2 V of potential and 150 s of deposition duration, platinum developed as nanoflower shape and scattered densely all over the glassy carbon surface, producing the largest electrochemically active surface areas. The highest differential pulse stripping voltammetry (DPSV) signal of lead was obtained by using the prepared electrode. Under optimized experimental condition of electrolyte, accumulation potential and time, the peak current was found to be linear proportion to lead concentration in range of 1 to 100 μg L^?1 (slope=0.371) with a limit of detection of 0.398 μg L^?1. The method has good repeatability and reproducibility with relative standard deviations of 1.47 % and 4.83 %, respectively. The modified PtNFs/GCE also demonstrated an excellent long‐term stability with only 9 % decrease in Pb peak current over 30 days. Moreover, the performance of the modified PtNFs/GCE in determination of Pb(II) in two industrial wastewaters was good agreement with data obtained by a graphite furnace atomic absorption spectrometry (GFAAS) method.     

Titanium Carbene Complexes Stabilized by Alkali Metal Amides

Facile α‐H elimination from tetrakis(trimethylsilylmethyl)titanium precursors to give adducts of (alkylidene)bis(alkyl)titanium complexes is induced by light alkali metal amides of the NNNN‐type macrocyclic anionic ligand Me₃TACD [(Me₃TACD)H=1,4,7‐trimethyl‐1,4,7,10‐tetraazacyclododecane]. In the crystal, the alkali metal interacts with the carbene carbon atom or with the CH₂ group of the trimethylsilymethyl ligand. The nucleophilic character of the carbene carbon atom was shown by the reaction with benzophenone and terminal acetylenes.     

Unexpected formation of dinaphthoaza-17-crown-5 ether containing γ-aminopiperidine subunit

1. Download : Download high-res image (90KB)
2. Download : Download full-size image

     

A new dimeric alkylresorcinol from the stem barks of Swintonia floribunda (Anacardiaceae)

From an EtOAc-soluble fraction of the stem barks of Swintonia floribunda (Anacardiaceae), one new dimeric alkylresorcinol named integracin E (1), together with 4 known compounds (2–5) were isolated. Their chemical structures were elucidated based on the spectroscopic data interpretation. The absolute configuration of 1 was determined by the specific rotation analysis of its acid-catalyzed hydrolysis product. Compound 1 showed potent tyrosinase inhibitory activity with an IC₅₀ value of 48.2?μM.     

Two Projection Algorithms for Solving the Split Common Fixed Point Problem

Journal of Optimization Theory and Applications - We study the split common fixed point problem for Bregman relatively nonexpansive operators in real reflexive Banach spaces. Using Bregman...     

The Role of Radical Bridges in Polynuclear Single-Molecule Magnets

Employing radical bridges between anisotropic metal ions has been a viable route to achieve high-performance single-molecule magnets (SMMs). While the bridges have been mainly considered for their ability to promote exchange interactions, the crystal-field effect arising from them has not been taken into account explicitly. This lack of consideration may distort the understanding and limit the development of the entire family. To shed light on this aspect, herein we report a theoretical investigation of a series of N -radical-bridged diterbium complexes. It is found that while promoting strong exchange coupling between the terbium ions, the N -radical induces a crystal field that interferes destructively with that of the outer ligands, and thus reduces the overall SMM behavior. Based on the theoretical results, we conclude that the SMM behavior in this series could be further maximized if the crystal field of the outer ligands is designed to be collinear with that of the radical bridge. This conclusion can be generalized to all exchange-coupled SMMs.     

Activation of α-Fe2O3 for Photoelectrochemical Water Splitting Strongly Enhanced by Low Temperature Annealing in Low Oxygen Containing Ambient

Photoelectrochemical (PEC) water splitting is a promising method for the conversion of solar energy into chemical energy stored in the form of hydrogen. Nanostructured hematite (α-Fe₂O₃) is one of the most attractive materials for a highly efficient charge carrier generation and collection due to its large specific surface area and the short minority carrier diffusion length. In the present work, the PEC water splitting performance of nanostructured α-Fe₂O₃ is investigated which was prepared by anodization followed by annealing in a low oxygen ambient (0.03 % O₂ in Ar). It was found that low oxygen annealing can activate a significant PEC response of α-Fe₂O₃ even at a low temperature of 400 °C and provide an excellent PEC performance compared with classic air annealing. The photocurrent of the α-Fe₂O₃ annealed in the low oxygen at 1.5 V vs. RHE results as 0.5 mA cm⁻², being 20 times higher than that of annealing in air. The obtained results show that the α-Fe₂O₃ annealed in low oxygen contains beneficial defects and promotes the transport of holes; it can be attributed to the improvement of conductivity due to the introduction of suitable oxygen vacancies in the α-Fe₂O₃. Additionally, we demonstrate the photocurrent of α-Fe₂O₃ annealed in low oxygen ambient can be further enhanced by Zn-Co LDH, which is a co-catalyst of oxygen evolution reaction. This indicates low oxygen annealing generates a promising method to obtain an excellent PEC water splitting performance from α-Fe₂O₃ photoanodes.     

Visible-Light-Induced Control over Reversible Single-Chain Nanoparticle Folding

We introduce a class of single-chain nanoparticles (SCNPs) that respond to visible light (λ_max=415 nm) with complete unfolding from their compact structure into linear chain analogues. The initial folding is achieved by a simple esterification reaction of the polymer backbone constituted of acrylic acid and polyethylene glycol carrying monomer units, introducing bimane moieties, which allow for the photochemical unfolding, reversing the ester-bond formation. The compaction and the light driven unfolding proceed cleanly and are readily followed by size exclusion chromatography (SEC) and diffusion ordered NMR spectroscopy (DOSY), monitoring the change in the hydrodynamic radius (R_H). Importantly, the folding reaction and the light-induced unfolding are reversible, supported by the high conversion of the photo cleavage. As the unfolding reaction occurs in aqueous systems, the system holds promise for controlling the unfolding of SCNPs in biological environments.     

Multi‐Species Multi‐Channel (MSMC): An Ab Initio‐based Parallel Thermodynamic and Kinetic Code for Complex Chemical Systems

Multi‐Species Multi‐Channel (MSMC) is an ab initio parallel program to calculate thermodynamic quantities (e.g., , , , and , time‐dependent species profiles, and rate coefficients as functions of temperature and pressure for complex chemical reaction systems, which consist of multiple stable species and multiple reaction channels interconnecting them. Thermodynamic properties of the species involved are calculated using statistical mechanics with molecular information from electronic structure calculations. Temperature‐ and pressure‐dependent behaviors are rigorously characterized within the eigenpair master equation/Rice–Ramsperger–Kassel–Marcus (ME/RRKM) framework. Corrections, e.g., for hindered internal rotation and tunneling treatment, are included. With the implementation of an ultra‐high precision package and rigorous matrix setup, MSMC is able to correctly mimic real behaviors of different types of chemical systems. Different eigenpair‐based approaches to extract phenomenological/macroscopic rate coefficients are implemented for different applications. Moreover, a friendly and platform‐independent graphical‐user‐interface (GUI) is provided to facilitate the use of MSMC and the pre‐/postcalculation data visualization/analysis on the fly. The program can be freely downloaded at https://sites.google.com/site/msmccode/ .