Nonlinear damage model for seismic damage assessment of reinforced concrete frame members and structures

A nonlinear damage model based on the combination of deformation and hysteretic energy and its validation with experiments are presented. Also, a combination parameter is defined to consider the mutual effect of deformation and hysteretic energy for different types of components in different loading stages. Four reinforced concrete (RC) columns are simulated and analyzed using the nonlinear damage model. The results indicate that the damage evolution evaluated by the model agrees well with the experimental phenomenon. Furthermore, the seismic damage evolution of a six-story RC frame was analyzed, revealing four typical failure modes according to the interstory drift distribution of the structure; the damage values calculated using the nonlinear damage model agree well with the four typical failure modes.     

A perimeter-based angle measure in Minkowski planes

Measuring angles in the Euclidean plane is a well-known topic, but for general normed planes there exists a variety of different concepts. These can be of a special kind, e.g. also preserving special orthogonality types. But these concepts are no angle measures in the sense of measure theory since they are not additive. This motivates us to define a new angle measure for normed planes that is in fact a measure in the sense of measure theory. Furthermore, we look at related types of rotation and reflection.     

Isolated resonances and nonlinear damping

We analyze isolated resonance curves (IRCs) in single-degree-of-freedom systems possessing nonlinear damping. Through the combination of singularity theory and the averaging method, the onset and merging of IRCs, which coincide to isola and simple bifurcation singularities, respectively, can be analytically predicted. Numerical simulations confirm the accuracy of the analytical developments. Another important finding of this paper is that we unveil a geometrical connection between the topology of the damping force and IRCs. Specifically, we demonstrate that extremas and zeros of the damping force correspond to the appearance and merging of IRCs. Considering a damping force possessing several minima and maxima confirms the general validity of the analytical result. It also evidences a very complex scenario for which different IRCs are created, co-exist and then merge together to form a super IRC which eventually merges with the main resonance peak.     

Natural convection with evaporation in a vertical cylindrical cavity under the effect of temperature-dependent surface tension

The effect of surface tension on laminar natural convection in a vertical cylindrical cavity filled with a weak evaporating liquid has been analyzed numerically. The cylindrical enclosure is insulated at the bottom, heated by a constant heat flux from the side, and cooled by a non-uniform evaporative heat flux from the top free surface having temperature-dependent surface tension. Governing equations with corresponding boundary conditions formulated in dimensionless stream function, vorticity, and temperature have been solved by finite difference method of the second-order accuracy. The influence of Rayleigh number, Marangoni number, and aspect ratio on the liquid flow and heat transfer has been studied. Obtained results have revealed that the heat transfer rate at free surface decreases with Marangoni number and increases with Rayleigh number, while the average temperature inside the cavity has an opposite behavior; namely, it growths with Marangoni number and reduces with Rayleigh number.     

Modeling interface shear behavior of granular materials using micro-polar continuum approach

Recently, the authors have focused on the shear behavior of interface between granular soil body and very rough surface of moving bounding structure. For this purpose, they have used finite element method and a micro-polar elasto-plastic continuum model. They have shown that the boundary conditions assumed along the interface have strong influences on the soil behavior. While in the previous studies, only very rough bounding interfaces have been taken into account, the present investigation focuses on the rough, medium rough and relatively smooth interfaces. In this regard, plane monotonic shearing of an infinite extended narrow granular soil layer is simulated under constant vertical pressure and free dilatancy. The soil layer is located between two parallel rigid boundaries of different surface roughness values. Particular attention is paid to the effect of surface roughness of top and bottom boundaries on the shear behavior of granular soil layer. It is shown that the interaction between roughness of bounding structure surface and the rotation resistance of bounding grains can be modeled in a reasonable manner through considered Cosserat boundary conditions. The influence of surface roughness is investigated on the soil shear strength mobilized along the interface as well as on the location and evolution of shear localization formed within the layer. The obtained numerical results have been qualitatively compared with experimental observations as well as DEM simulations, and acceptable agreement is shown.     

Parametrix for the localization of the Bergman metric on strictly pseudoconvex domains

We give the parameter version of a localization theorem for the Bergman metric near the boundary points of strictly pseudoconvex domains. The approximation theorem for square integrable holomorphic functions on such domains in the spirit of Graham-Kerzman is proved in the hereby paper, as well.     

An enriched damage-frictional cohesive-zone model incorporating stress multi-axiality

The paper presents an interphase cohesive zone model (CZM) incorporating stress multi-axiality devised to capture, by simplified micro-modeling, the influence of the in-plane strain and stress state in the mechanical response of the CZM. Moreover, the model is able to account for the Poisson-related effect in the interphase, which can play an important role in the modeling of heterogeneous masonry elements. From the constitutive point of view, the proposed formulation couples damage and friction by addressing a smooth transition from a quasi-brittle response to a residual frictional behavior described by a Coulomb law with unilateral contact. As in-plane stresses are accounted for, damage activation and evolution are governed by a Drucker–Prager law with linear softening. A predictor-corrector procedure based on a backward Euler scheme is detailed for integrating the nonlinear evolutive problem together with the related tangent operator which consistently linearizes the algorithmic strategy. This framework is embedded into a kinematically-enriched finite element interphase formulation incorporating stress multi-axiality. The modeling features of the resulting numerical tool are tested both at the local level, for the typical interphase point, and in meso-structural tests consisting of brick-mortar triplets, investigating the capability of the proposed model and numerical procedure to simulate the brick-mortar decohesion mechanism during confined slip tests.     

An analytical poroelastic model for laboratorial mechanical testing of the articular cartilage (AC)

The articular cartilage (AC) can be seen as a biphasic poroelastic material. The cartilage deformation under compression mainly leads to an interstitial fluid flow in the porous solid phase. In this paper, an analytical poroelastic model for the AC under laboratorial mechanical testing is developed. The solutions of interstitial fluid pressure and velocity are obtained. The results show the following facts. (i) Both the pressure and fluid velocity amplitudes are proportional to the strain loading amplitude. (ii) Both the amplitudes of pore fluid pressure and velocity in the AC depend more on the loading amplitude than on the frequency. Thus, in order to obtain the considerable fluid stimulus for the AC cell responses, the most effective way is to increase the loading amplitude rather than the frequency. (iii) Both the interstitial fluid pressure and velocity are strongly affected by permeability variations. This model can be used in experimental tests of the parameters of AC or other poroelastic materials, and in research of mechanotransduction and injury mechanism involved interstitial fluid flow.     

Static Charge Susceptibility in the <Emphasis Type="Italic">t-J-V</Emphasis> Model

We describe the static charge susceptibility and correlation function of the charge density in the twodimensional t-J-V model based on the method of equations of motion for the relaxation functions of the Hubbard operators. We obtain the dependence of the susceptibility and correlation function on the hole concentration and temperature. Charge density waves can develop if the intersite Coulomb interaction is sufficiently strong.