A Comparison of Four Different Electrode Matrices on the Performance of Amperometric Hydrogen Peroxide (Bio)Sensors

A comparison of the analytical performances of four different (bio)sensor designs in H₂O₂ determination is discussed. The (bio)sensor designs developed were based on the use of (i) multiwalled carbon nanotubes (MWCNT), zinc oxide nanoparticles (ZnONP), prussian blue (PB); (ii) MWCNT, ZnONP, PB and ionic liquid (IL); (iii) MWCNT, ZnONP and horseradish peroxidase (HRP) and (iv) MWCNT, ZnONP, HRP and IL modified glassy carbon electrode (GCE). A performance comparison of (bio)sensors showed that the one based on HRP/IL-MWCNT-ZnONP/GCE showed the best analytical characteristics with a linear dynamic range of 9.99×10⁻⁸–7.55×10⁻⁴ M, detection limit of 1.37×10⁻⁸ M and sensitivity of 17.00 μA mM⁻¹.     

A Districtwide Study of Automaticity When Included in Concept‐Based Elementary School Mathematics Instruction

While conceptual understanding of properties, operations, and the base‐ten number system is certainly associated with the ability to access math facts fluently, the role of math fact memorization to promote conceptual understanding remains contested. In order to gain insight into this question, this study looks at the results when one of three elementary schools in a school district implements mandatory automaticity drills for 10 minutes each day while the remaining two elementary schools, with the same curriculum and very similar demographics, do not. This study looks at (a) the impact that schoolwide implementation of automaticity drills has on schoolwide computational math skills as measured by the ITBS and (b) the relationship between automaticity and conceptual understanding as measured by statewide standardized testing. The results suggest that while there may be an association between automaticity and higher performance on standardized tests, caution should be taken before assuming there are benefits to promoting automaticity drills. These results are consistent with those that support a process‐driven approach to automaticity based on familiarity with properties and strategies associated with the base‐ten number system; they are not consistent with those that support an answer‐driven approach to automaticity based on memorization of answers.     

Phase diagrams of the mixed spin-1 and spin-1/2 Ising-Heisenberg model on the diamond-like decorated Bethe lattice

The ground-state and finite-temperature behavior of the mixed spin-1 and spin-1/2 Ising-Heisenberg model on the diamond-like decorated Bethe lattice is investigated within the framework of two rigorous methods: the decoration-iteration transformation and exact recursion relations. The model under consideration describes a hybrid classical-quantum system consisting of the Ising and Heisenberg spins, which interact among themselves either through the Ising or XXZ Heisenberg nearest-neighbor interaction. Both sublattice magnetizations of the Ising and Heisenberg spins are exactly calculated with the aim to examine phase diagrams, thermal variations of the total and sublattice magnetizations. The finite-temperature phase diagrams form continuous (second-order) phase transition lines only, which exhibit a small reentrant region if the diamond-like decorated Bethe lattice with a sufficiently high coordination number is considered.     

Synthesis and characterization of new 4,5-dihydropyrazol-1-yl derivatives

In this study, first, a series of chalcone compounds S1–S6 were synthesized from various acetophenone derivatives (acetophenone, p-methyl acetophenone, and p-methoxy acetophenone) and aromatic aldehyde derivatives (benzaldehyde, p-methyl benzaldehyde, and p-methoxy benzaldehyde) by the Claisen–Schmidt condensation reaction. These S1–S6 compounds were then used in the preparation of 4,5-dihydropyrazol-1-yl derivatives S7–S15. Finally, four new compounds S16–S19 were synthesized from compound (S7, S8, S9, and S12) and 2,4-dinitrophenylhydrazine. Therefore, three known and ten new heterocyclic compounds were synthesized and completely characterized using ¹H NMR, ¹³C NMR, IR, and elemental analysis.     

Lipase biosensor for tributyrin and pesticide detection

Potentiometric biosensors based on Candida rugosa lipase was described for the detection of organophosphorus pesticide; methyl-parathion and tributyrin. Lipase was immobilized on the glass electrode by means of a gelatin membrane, which is then cross-linked with glutaraldehyde. The principle of the biosensor is based on the measurement of pH variation which was recorded in millivolts due to the enzymatic hydrolysis of tributyrin to butyric acid. For the inhibitor detection, biosensor responses were measured after pesticide treatment, which caused a drop in enzyme activity because of the irreversible inhibition. Reactivation conditions of the reused enzyme electrodes were also investigated by pyridine-2-aldoxime methiodide (2-PAM). The limit of detection for tributyrin was estimated as 93?µM for lipase sensor within the linear range of 65–455?µM.     

Spectral characterization and antibacterial effect of 2-methyl-6-(5-H-Me-Cl-NO <Subscript>2</Subscript>-1<Emphasis Type="Italic">H</Emphasis>-benzimidazol-2-yl)-phenols and some transition metal complexes

2-Methyl-6-(5-H-methyl-chloro-nitro-1H-benzimidazol-2-yl)-phenols( HL _x :x= 1-4)ligands and HL₁ complexes with Fe(NO₃)₃, Cu(NO₃)₂, AgNO₃, Zn(NO₃)₂ have been synthesized and characterized. The structures of the compounds were confirmed on the basis of elemental analysis, molar conductivity, magnetic moment, FT-IR, ¹H-and ¹³C-NMR. Antibacterial activity of the free ligands, their hydrochloride salts and the complexes were evaluated using the disk diffusion method in dimethyl sulfoxide as well as the minimum inhibitory concentration dilution method, against nine bacteria. While HL₁ ligand has not any activity, it’s Ag(I) complex show antibacterial effect toward almost to all the bacteria. Zn(II) complex has antibacterial effect on especially K. pneumoniae, S. epidermidis and S. aureus bacteria.     

The Transport Properties of the Cell Membrane Ion Channels in Electric Fields: Bethe Lattice Treatment

The interactive two-state model of cell membrane ion channels in an electric field is formulated on the Bethe lattice by means of the exact recursion relations. The probability of channel opening or maximum fractions of open potassium and sodium channels are obtained by solving a non-linear algebraic equation. Using known parameters for the conventional mean-field theory the model gives a good agreement with the experiment both at low and high trans-membrane potential values. For intermediate voltages, the numerical results imply that collective effects are introduced by trans-membrane voltage.     

Spun films of perylene diimide derivative for the detection of organic vapors with host–guest principle

The optical characterization and chemical vapor sensing properties of 1,7-dibromo-N,N′-(bicyclohexyl)-3,4:9,10-perylene diimide thin film against to organic vapors were discussed in this study by using spin coating, UV–Vis spectroscopy, atomic force microscopy, surface plasmon resonance (SPR) and Quartz Crystal Microbalance (QCM) techniques. The perylene diimide thin films were fabricated with a refractive index values from 1.55 to 1.60 and thicknesses in the range between 15.80 and 26.32 nm using different spin speeds from 1000 to 5000 rpm. In this study, perylene diimide thin film sensor was exposed to dichloromethane, chloroform, carbon tetrachloride, tetrahydrofuran and ethyl acetate vapors by using both SPR and QCM techniques. Also, the swelling behaviors of the perylene diimide thin films prepared at different spin speeds were investigated with respect to dichloromethane vapor at the room temperature by using SPR data. Diffusion coefficients were found to be 11.34?×?10^?17 (1000 rpm), 2.56?×?10^?17 (3000 rpm) and 0.38?×?10^?17 cm² s^?1 (5000 rpm) for dichloromethane vapor by using the Fick’s law of diffusion. It might be proposed that perylene diimide thin film optical chemical sensor element has a good sensitivity and selectivity for the dichloromethane vapor at room temperature.     

Microstructural properties and local atomic structures of cobalt oxide nanoparticles synthesised by mechanical ball-milling process

In this study, facile preparation of pure and nano-sized cobalt oxides particles was achieved using low-cost mechanical ball-milling synthesis route. Microstructural and morphological properties of synthesised products were characterised by X-ray diffraction (XRD) and transmission electron microscopy (TEM) techniques. XRD results indicated that the fabricated samples composed of cubic pure phase CoO and Co₃O₄ nanocrystalline particles with an average crystallite size of 37.2 and 31.8 nm, respectively. TEM images showed that the resulting samples consisted of agglomerates of particles with average diameter of about 37.6 nm for CoO and 31.9 nm for Co₃O₄. Phase purity of the prepared samples was further investigated due to their promising technological applications. Local atomic structure properties of the prepared nanoparticles were probed using synchrotron radiation-based X-ray absorption spectroscopy (XAS) including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). EXAFS data analysis further confirmed the formation of single-phase CoO and Co₃O₄ nanoparticles. In addition, structural properties of cobalt oxide nanoparticles were investigated by performing density functional theory calculations at B3LYP/TZVP level and Born–Oppenheimer molecular dynamics. Theoretical calculations for both prepared samples were found to be consistent with the experimental results derived from EXAFS analysis. Obtained results herein reveals that highly crystalline and pure phase CoO and Co₃O₄ nanoparticles can be synthesised using simple, inexpensive and eco-friendly ball-milling method for renewable energy applications involving fuel cells and water splitting devices.     

A step toward the wet surface chemistry of glycine and alanine on Cu{110}: destabilization and decomposition in the presence of near-ambient water vapor

The coadsorption of water with organic molecules under near-ambient pressure and temperature conditions opens up new reaction pathways on model catalyst surfaces that are not accessible in conventional ultrahigh-vacuum surface-science experiments. The surface chemistry of glycine and alanine at the water-exposed Cu{110} interface was studied in situ using ambient-pressure photoemission and X-ray absorption spectroscopy techniques. At water pressures above 10(-5) Torr a significant pressure-dependent decrease in the temperature for dissociative desorption was observed for both amino acids, accompanied by the appearance of a new CN intermediate, which is not observed for lower pressures. The most likely reaction mechanisms involve dehydrogenation induced by O and/or OH surface species resulting from the dissociative adsorption of water. The linear relationship between the inverse decomposition temperature and the logarithm of water pressure enables determination of the activation energy for the surface reaction, between 213 and 232 kJ/mol, and a prediction of the decomposition temperature at the solid-liquid interface by extrapolating toward the equilibrium vapor pressure. Such experiments near the equilibrium vapor pressure provide important information about elementary surface processes at the solid-liquid interface, which can be retrieved neither under ultrahigh vacuum conditions nor from interfaces immersed in a solution.