A Switch in the Hydrophobic/Hydrophilic Gas-Adsorption Character of Prussian Blue Analogues: An Affinity Control for Smart Gas Sorption

Porous coordination polymers are molecule-based materials presenting a high degree of tunability, which offer many advantages for targeted applications over conventional inorganic materials. This work demonstrates that the hydrophilic/hydrophobic character of Prussian blue analogues having a lipophilic feature may be tuned to optimize the gas adsorption properties. The role of the coordinatively unsaturated metal sites is emphasized through a combination of theoretical and experimental study of water, ethanol, and n-hexane adsorption.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Rapid Discrimination of Crystal Handedness by X-ray Natural Circular Dichroism (XNCD) Mapping

An original method for determining the handedness of individual non-centrosymmetric crystals in a mixture using a tightly-focused, circularly polarized X-ray beam is presented. The X-ray natural circular dichroism (XNCD) spectra recorded at the metal K-edge on selected crystals of [Δ-M(en)₃](NO₃)₂ and [Λ-M(en)₃](NO₃)₂ (M=Co^II, Ni^II) show extrema at the metal pre-edge (7712 eV for Co, 8335 eV for Ni). A mapping of a collection of some 220 crystals was performed at the respective energies by using left and right circular polarizations. The difference in absorption for the two polarizations, being either negative or positive, directly yielded the handedness of the crystal volume probed by the beam. By using this technique, it was found that the addition of l -ascorbic acid during the synthesis of [Co(en)₃](NO₃)₂ resulted in an enantiomeric enrichment of the Λ-isomer of 67±13 %, whereas the Ni analogue was similarly, but conversely, enriched in the Δ-isomer (65±22 %).     

Characterization of polyoxometalate/polymer photo-composites: A toolbox for the photodegradation of organic pollutants

Different inorganic/organic photocomposites based on polyoxometalate (POM) nanoparticles have been developed for photocatalytic applications. Currently, polyoxometalate nanoparticles have been successfully in-situ embedded into an acrylate polymer network by photopolymerization upon mild visible light irradiation at 405 nm. The proposed POM/polymer photocomposites have been characterized using complementary techniques for a better understanding of their photocatalytic activity. Interestingly, the obtained photocomposites exhibit high rigidity, excellent thermal stability, a non-negligible porosity and new functionalities such as light reactivity and redox properties. Moreover, developed composites showed efficient catalytic activity for the color removal of aqueous solutions of erythrosine and rose Bengal under Light Emitting Diodes LED@375 nm irradiation reaching 80 and 90% as a final color removal, respectively.     

Influence of the PVOH molar mass on the morphology and functional properties of EVOH/PVOH films prepared by melt blending

The influences of the molar mass (low, medium, and high) and content of poly(vinyl alcohol) (PVOH) dispersed by melt-blending in an ethylene vinyl alcohol (EVOH) copolymer on the morphology, microstructure, thermal, mechanical, and oxygen barrier properties were investigated. Multilayer films with external low-density polyethylene layers and inner EVOH/PVOH blend layer and respective monolayer films were elaborated and characterized. EVOH/PVOH blends exhibited a good compatibility because of the initial presence of PVOH segments in EVOH. The detailed quantitative analysis of the morphology performed for all blends showed that the finest dispersion was obtained with the PVOH with the lowest molar mass. The properties of the films as a function of the PVOH content and its molar mass were determined herein. Significant improvement of barrier properties was obtained at moderated water activities (up to a_w = 0.6) by using the PVOH with the lowest molar mass. Compared to the neat EVOH material, the oxygen permeability coefficients decreased by a factor 2 by adding 15 vol% PVOH while the thermal and mechanical properties remained similar.     

Radical Cyclisation of α‐Halo Aluminium Acetals: A Mechanistic Study

α‐Bromo aluminium acetals are suitable substrates for Ueno–Stork‐like radical cyclisations affording γ‐lactols and acid‐sensitive methylene‐γ‐lactols in high yields. The mechanistic study herein sets the scope and limitation of this reaction. The influence of the halide (or chalcogenide) atom X (X=Cl, Br, I, SPh, SePh) in the precursors α‐haloesters, as well as influence of the solvent and temperature was studied. The structure of the aluminium acetal intermediates resulting from the reduction of the corresponding α‐haloesters has been investigated by low‐temperature ¹³C‐INEPT diffusion‐ordered NMR spectroscopy (DOSY) experiments and quantum calculations, providing new insights into the structures of these thermally labile intermediates. Oxygen‐bridged dimeric structures with a planar Al₂O₂ ring are proposed for the least hindered aluminium acetals, while monomeric structures seem to prevail for the most hindered species. A comparison against the radical cyclisation of aluminium acetals derived from allyl and propargyl alcohols with the parent Ueno–Stork has been made at the BHandHLYP/6‐311++G(d,p) level of theory, highlighting mechanistic similarities and differences.     

A Bistable Microelectromechanical System Actuated by Spin-Crossover Molecules

We report on a bistable MEMS device actuated by spin-crossover molecules. The device consists of a freestanding silicon microcantilever with an integrated piezoresistive detection system, which was coated with a 140 nm thick film of the [Fe(HB(tz)₃)₂] (tz=1,2,4-triazol-1-yl) molecular spin-crossover complex. Switching from the low-spin to the high-spin state of the ferrous ions at 338 K led to a reversible upward bending of the cantilever in agreement with the change in the lattice parameters of the complex. The strong mechanical coupling was also evidenced by the decrease of approximately 66 Hz in the resonance frequency in the high-spin state as well as by the drop in the quality factor around the spin transition.     

Cover Feature: Copper and Nickel Complexes of Oxamate−Phenol Containing Ligands: A Structural Dichotomy in Oxidized Species (Eur. J. Inorg. Chem. 15/2023)

The copper and nickel complexes of two tetradentate ligands derived from bis(aminophenol) and bis(phenol) architectures connected by an oxamate linker were isolated. Depending on the metal and ligand, the complex is isolated with either an intact (deprotonated) ligand ( 1²⁻ ), one-electron oxidized ligand ( 2⁻ ) or quinone form ( 3 ). Surprisingly, the Mannich base is easier to oxidize than the amidophenol derivatives. The complexes were characterized by X-ray diffraction, cyclic voltammetry, UV-Vis-NIR and EPR spectroscopies. Complex 1 shows two reversible oxidation waves assigned to the successive iminosemiquinone/aminophenolate redox systems. Complex 2⁻ shows an intense NIR feature, as well as an EPR signal at g_iso=2.043, consistent with a metallic contribution to the main ligand radical SOMO. Complex 3 shows the typical feature of an isolated Cu(II) complex. Spectro-electrochemistry coupled to DFT calculations demonstrate a ligand-centered oxidative redox chemistry for all the complexes.     

Stereo- and Regiochemical Effect of N,N-Dialkylamide Extractants on the Speciation of Pu Complexes

The relationship between extractant stereochemistry and their extraction performance has only poorly been established. In order to address a part of this concern, we investigated the Pu(IV) liquid-liquid extraction (LLE) by using the N,N-di-(2-ethylhexyl)butyramide (DEHBA), as well as those of its position isomers. DEHBA (ββ-isomer) and N-(2-ethylhexyl)-N-(oct-3-yl)butyramide (EHOBA or αβ-isomer) were synthesized as a mixture of stereoisomer or stereoenriched (R,S)- and (S,S)-diastereoisomers, and were all assessed for Pu^IV LLE. The results showed that both the position and the stereoisomerism of the aliphatic substituents affect Pu^IV complexation and extraction. We found that Pu extraction is lowered by factor 2 to 4 when the ethyl branching group is closer to the complexing site. UV-vis spectroscopy showed that this extraction decrease was affected by steric hindrance inducing a deprivation of Pu inner sphere complex. Effect of stereoisomerism is highlighted for branching closer to the complexing site (α-position). Enantiopure DEHBA stereoisomers provided similar Pu extraction, whereas a slight decrease could be noticed for the more cluttered stereoenriched (αβ)-isomers, which was also concomitant with a smaller population of inner sphere complex. In contrast, the stereoisomers mixture led to a strong decrease of Pu extraction because of an antagonistic association in the mixed complexes.