Characteristics and safety of nano-sized cellulose fibrils

A finely ground fibrillated cellulose was fractionated into separate size fractions. The characteristics of the smallest size fractions were studied, and the toxicity to humans was tested as part of a safety assessment. Morphological studies performed with state-of-the-art methods, such as scanning electron microscopy and atomic force microscopy, showed that the fraction obtained consisted of long thin fibrils but also larger fibril agglomerates, and spherical particles were present. The finest fraction did not show any sub-lethal effects as assessed by RNA inhibition test in vitro, nor were there any indications of genotoxicity as tested by the Ames test in vitro. Systemic effects tested in vivo with the nematode were also absent. No cytotoxic effects were seen in the highest tolerated dose test in vitro, but some indication of cytotoxicity was observed in the total protein content test in vitro at the highest sample concentration. The significance of this toxicity test result should be addressed in relation to the other toxicity tests, in which no toxicity was observed, with special emphasis on the in vivo test. Given this, the overall toxicity analyses support the conclusion that nano-scale cellulose fibrils can be considered to be safe towards humans. However, the reason for the positive cytotoxicity test result and, in addition, the effect of the biocide used in sample preservation on the toxicity tests need to be clarified before generalizing these results and declaring nanocellulose to be unambiguously safe.     

The backus-gilbert method revisited: background,implementation and examples

The paper deals with the Backus-Gilbert or averaging kernel inversion of linear integral equations. The theoretical background of the method is developed: it is shown that the method leads to a sequence of linear pointwise estimates, which are asymptotically unbiased when no error is present. Anumerical implementation is given. Finally, the algorithm is applied to numerical differentiation, Laplace transform inversion and to a geophysical inverseproblem arising in electromagnetic sounding.     

Optical sensing of parameters crucial for Japanese woodblock print making

Traditional Japanese woodblock printing is a centuries old art form. This time-honoured form of art is at risk of extinction as a consequence of the increasing lack of availability of wild cherry trees, which are a traditionally used woodblock material. Solutions for this material problem have been investigated for several years, but none of the tested materials has been sufficient when compared with the watercolour print quality imprinted by wild cherry woodblocks. To contribute to overcoming this material problem, we have investigated the physical properties of heat-treated woodblock materials made from different wood species. The International Commission on Illumination (CIE) tristimulus values, the CIELAB coordinates, the total reflectance, and the gloss, as well as, the water contact angle from the woodblock surface is observed to have a strong relation to the surface treatment of a woodblock. The surface treatment of a woodblock, in turn, relates to its water delivery, which is the basis for watercolour printing.     

Adsorption of mercury on gold and silver surfaces

In order to study the adsorption mechanism of Hg on Au and Ag substrates, thin film Au(111) and Ag(111) substrates were exposed to gaseous metallic mercury, while the mercury concentration, substrate temperature, and exposure length were varied. The resulting changes in the surface morphology of the substrates were studied with scanning tunneling microscopy (STM). The amount of adsorbed Hg required to cause saturation, i.e. a decrease in the adsorption rate was found to be dependent on the mercury concentration and substrate temperature. The observations lead to the conclusion that the adsorption includes place exchange processes and concerted adsorption of more than one Hg atom in one process. The results show that the collection efficiency of single-crystalline surfaces is a function of both mercury concentration and temperature. Therefore, results from measurements performed at different conditions using single-crystalline surfaces may not be comparable. Received: 3 February 1999 / Revised: 7 June 1999 / Accepted: 9 June 1999     

Optical aperture area determination for accurate illuminance and luminous efficacy measurements of LED lamps

The measurement uncertainty of illuminance and, consequently, luminous flux and luminous efficacy of LED lamps can be reduced with a recently introduced method based on the predictable quantum efficient detector (PQED). One of the most critical factors affecting the measurement uncertainty with the PQED method is the determination of the aperture area. This paper describes an upgrade to an optical method for direct determination of aperture area where superposition of equally spaced Gaussian laser beams is used to form a uniform irradiance distribution. In practice, this is accomplished by scanning the aperture in front of an intensity-stabilized laser beam. In the upgraded method, the aperture is attached to the PQED and the whole package is transversely scanned relative to the laser beam. This has the benefit of having identical geometry in the laser scanning of the aperture area and in the actual photometric measurement. Further, the aperture and detector assembly does not have to be dismantled for the aperture calibration. However, due to small acceptance angle of the PQED, differences between the diffraction effects of an overfilling plane wave and of a combination of Gaussian laser beams at the circular aperture need to be taken into account. A numerical calculation method for studying these effects is discussed in this paper. The calculation utilizes the Rayleigh–Sommerfeld diffraction integral, which is applied to the geometry of the PQED and the aperture. Calculation results for various aperture diameters and two different aperture-to-detector distances are presented.     

A Selenium‐Nitrogen Chain with Selenium in Different Oxidation States

The reaction of tBuNH₂ with a mixture of SeCl₂ and SeOCl₂ in a 6:2:1 molar ratio produces the novel selenium‐nitrogen chain ClSeN(tBu)Se(O)Cl ( 4 ), in which the selenium atoms are in two different oxidation states, Se^II and Se^IV. The crystal structure of 4 is compared with that of the related Se^II/Se^II system ClSeN(tBu)SeCl ( 1 ) and differences are attributed to hyperconjugative effects. The energetics of the formation of 4 via two different routes are elucidated by PBE0/def2‐TZVPP calculations.     

Engineering strategy to improve peptide analogs: from structure-based computational design to tumor homing

We present a chemical strategy to engineer analogs of the tumor-homing peptide CREKA (Cys-Arg-Glu-Lys-Ala), which binds to fibrin and fibrin-associated clotted plasma proteins in tumor vessels (Simberg et al. in Proc Natl Acad Sci USA 104:932–936, 2007) with improved ability to inhibit tumor growth. Computer modeling using a combination of simulated annealing and molecular dynamics were carried out to design targeted replacements aimed at enhancing the stability of the bioactive conformation of CREKA. Because this conformation presents a pocket-like shape with the charged groups of Arg, Glu and Lys pointing outward, non-proteinogenic amino acids α-methyl and N-methyl derivatives of Arg, Glu and Lys were selected, rationally designed and incorporated into CREKA analogs. The stabilization of the bioactive conformation predicted by the modeling for the different CREKA analogs matched the tumor fluorescence results, with tumor accumulation increasing with stabilization. Here we report the modeling, synthetic procedures, and new biological assays used to test the efficacy and utility of the analogs. Combined, our results show how studies based on multi-disciplinary collaboration can converge and lead to useful biomedical advances.     

High molar mass ethene/1‐olefin copolymers synthesized with acenaphthyl substituted metallocene catalysts

The influence of ligand structure on copolymerization properties of metallocene catalysts was elucidated with three C₁‐symmetric methylalumoxane (MAO) activated zirconocene dichlorides, ethylene(1‐(7, 9)‐diphenylcyclopenta‐[a]‐acenaphthadienyl‐2‐phenyl‐2‐cyclopentadienyl)ZrCl₂ ( 1 ), ethylene(1‐(7, 9)‐diphenylcyclopenta‐[a]‐acenaphthadienyl‐2‐phenyl‐2‐fluorenyl)ZrCl₂ ( 2 ), and ethylene(1‐(9)‐fluorenyl‐(R)1‐phenyl‐2‐(1‐indenyl)ZrCl2 ( 3 ). Polyethenes produced with 1 /MAO had considerable, ca. 10% amount of trans‐vinylene end groups, resulting from the chain end isomerization prior to the chain termination. When ethene was copolymerized with 1‐hexene or 1‐hexadecene using 1 /MAO, molar mass of the copolymers varied from high to moderate (531–116 kg/mol) depending on the comonomer feed. At 50% comonomer feed, ethene/1‐olefin copolymers with high hexene or hexadecene content (around 10%) were achievable. In the series of catalysts, polyethenes with highest molar mass, up to 985 kg/mol, were obtained with sterically most crowded 2 /MAO, but the catalyst was only moderately active to copolymerize higher olefins. Catalyst 3 /MAO produced polyethenes with extremely small amounts of trans‐vinylene end groups and relatively low molar mass 1‐hexene copolymers (from 157 to 38 kg/mol) with similar comonomer content as 1 . These results indicate that the catalyst structure, which favors chain end isomerization, is also capable to produce high molar mass 1‐olefin copolymers with high comonomer content. In addition, an exceptionally strong synergetic effect of the comonomer on the polymerization activity was observed with catalyst 3 /MAO. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 373–382, 2008