Quantitative analysis of perchlorate in extracts of whole fish homogenates by ion chromatography: comparison of suppressed conductivity detection and electrospray ionization mass spectrometry

The perchlorate anion (ClO ₄ ^– ) is an anthropogenic contaminant of increasing concern in water supplies, and has been shown to disrupt thyroid activity. Most perchlorate analyses are currently carried out by ion chromatography (IC) with suppressed conductivity detection (SCD). While this procedure has been demonstrated to provide acceptable performance for analysis of water samples, the determination of perchlorate in high-conductivity aqueous extracts of plant or animal material is not readily accomplished by IC-SCD unless lengthy cleanup protocols are applied. With the addition of electrospray ionization mass spectrometry (ESI-MS) to IC, it was hypothesized that the interference imposed by various ionic species could be significantly reduced without the need for purification; however, the analysis of perchlorate in relatively unpurified extracts of biologically derived homogenates by IC-ESI-MS has not previously been described in the literature. The research presented here represents a comparison of the capabilities of IC-SCD and IC-ESI-MS to detect perchlorate in reagent water and in crude extracts of perchlorate-exposed fish (threespine stickleback, Gasterosteus aculeatus). ESI-MS was found to compare favorably to SCD for the detection of perchlorate in deionized water, and to exceed SCD performance in perchlorate analysis of fish-derived extracts.     

Inclusion of Nonopiate Analgesic Drugs in Cyclodextrins. I. X-Ray Structure of a 1 : 1 β-Cyclodextrin-p-bromoacetanilide Complex

The preparation and X-ray crystal structure of a 1 : 1 complex between -cyclodextrin (-CD) and the analgesic p-bromoacetanilide are reported. Thermogravimetric and UV spectrophotometric analyses of single crystals grown from an aqueous solution containing host and guest in 1 : 1 molar ratio yielded the composition -CD p-bromoacetanilide $ 13.5H2O. Crystals of the complex are triclinic, space group P1, with a = 15.197(3), b = 15.613(2), c = 15.743(4) Å, = 87.16(2), = 98.29(2), = 103.39(1)° and Z = 2 crystallographically independent complex units per unit cell. The -CD molecules form head-to-head dimers which pack in the channel-mode. Each dimer contains two guest molecules whose acetylamino substituents are located at the dimer interface while the bromine atoms protrude from the -CD primary faces. The acetyl residues of both guest molecules were found to be disordered but the X-ray data permitted     

Characterizations of Kadec-Klee properties in symmetric spaces of measurable functions

We present several characterizations of Kadec-Klee properties in symmetric function spaces on the half-line, based on the -functional of J. Peetre. In addition to the usual Kadec-Klee property, we study those symmetric spaces for which sequential convergence in measure (respectively, local convergence in measure) on the unit sphere coincides with norm convergence.

     

Synthesis and structure of the calixarene-like phosph(III)azane macrocycle [{P(mu-N(t)Bu)}2{1,5-(NH)2C10H6}]3

The reaction of [ClP(mu-NtBu)]2 with 1,5-diamino-naphthalene [1,5-(NH2)2C10H6] in Et3N-thf gives the trimeric macrocycle [{P(mu-NtBu)}2{1,5-(NH)2C10H6}]3(1); the X-ray structure of the toluene solvate 1.3toluene reveals a cone-shaped (calixarene-like) arrangement in which toluene guest molecules are trapped within the cavity.     

Homogeneous Catalytic Hydrogenation of Amides to Amines

Hydrogenation of amides in the presence of [Ru(acac)₃] (acacH=2,4‐pentanedione), triphos [1,1,1‐tris‐ (diphenylphosphinomethyl)ethane] and methanesulfonic acid (MSA) produces secondary and tertiary amines with selectivities as high as 93 % provided that there is at least one aromatic ring on N. The system is also active for the synthesis of primary amines. In an attempt to probe the role of MSA and the mechanism of the reaction, a range of methanesulfonato complexes has been prepared from [Ru(acac)₃], triphos and MSA, or from reactions of [RuX(OAc)(triphos)] (X=H or OAc) or [RuH₂(CO)(triphos)] with MSA. Crystallographically characterised complexes include: [Ru(OAc‐κ¹O)₂(H₂O)(triphos)], [Ru(OAc‐κ²O,O′)(CH₃SO₃‐κ¹O)(triphos)], [Ru(CH₃SO₃‐κ¹O)₂(H₂O)(triphos)] and [Ru₂(μ‐CH₃SO₃)₃(triphos)₂][CH₃SO₃], whereas other complexes, such as [Ru(OAc‐κ¹O)(OAc‐κ²O,O′)(triphos)], [Ru(CH₃SO₃‐κ¹O)(CH₃SO₃‐κ²O,O′)(triphos)], H[Ru(CH₃SO₃‐κ¹O)₃(triphos)], [RuH(CH₃SO₃‐κ¹O)(CO)(triphos)] and [RuH(CH₃SO₃‐κ²O,O′)(triphos)] have been characterised spectroscopically. The interactions between these various complexes and their relevance to the catalytic reactions are discussed.     

Site‐Selective Oxidation of Monolayered Liquid‐Exfoliated WS2 by Shielding the Basal Plane through Adsorption of a Facial Amphiphile

In recent years, various functionalization strategies for transition‐metal dichalcogenides have been explored to tailor the properties of materials and to provide anchor points for the fabrication of hybrid structures. Herein, new insights into the role of the surfactant in functionalization reactions are described. Using the spontaneous reaction of WS₂ with chloroauric acid as a model reaction, the regioselective formation of gold nanoparticles on WS₂ is shown to be heavily dependent on the surfactant employed. A simple model is developed to explain the role of the chosen surfactant in this heterogeneous functionalization reaction. The surfactant coverage is identified as the crucial element that governs the dominant reaction pathway and therefore can severely alter the reaction outcome. This study shows the general importance of the surfactant choice and how detrimental or beneficial a certain surfactant can be to the desired functionalization.     

Coupling of inverse gas chromatography at infinite dilution (IGC-ID) with a controlled modification of a solid surface

This paper presents a new method for studying the surface of a heterogeneous solid by inverse gas chromatography at infinite dilution (IGC-ID). After saturating the high-energy sites by impregnation with a suitable polymer, the chromatographic probes visit the low energy sites, which are not visible by conventional IGC-ID. This method has been used to study the two types of surface of talc: lateral and basal surfaces. In the second part of the paper the influence of the structure of the polymer on the impregnation is examined. In particular it is shown that a polymer with a linear structure is more able to fit a rough surface than is a branched or a cyclic polymer.     

Observation of the anisotropic spin-glass transition and transverse spin ordering in pseudo-brookite through muon spin relaxation

Zero-field longitudinal muon-spin-relaxation (μSR) experiments have been performed on single crystals of pseudo-brookite (Fe₂−_xTi_l+x ^O ₅; x=0.25), an anisotropic spin-glass system. The spinglass temperature (Tg) is determined to be 44.0±0.5K. Above Tg, a distinct exponential muon-spin-relaxation rate (λ) is observed, while below Tg a square-root exponential decay is seen, indicating fast spin fluctuations in the ‘frozen’ state. Near 8K, a maximum in λ is observed, which is due to transverse spin ordering at these low temperatures. Even near Tg, λ is very low (<1 μs⁻¹), likely due to a well-defined muon-oxygen state in the single crystals. The sharp λ-increase (with decreasing temperatures) above Tg allows a comparison between spinfreezing models like the Vogel-Fulcher law and a power law. The results of these initial measurements indicate that dynamic (and static) magnetism in oxide spin glasses can be directly monitored through μSR.