Pre-Column Derivatization HPLC Procedure for the Quantitation of Aluminium Chlorohydrate in Antiperspirant Creams Using Quercetin as Chromogenic Reagent

This article describes the development and validation of a selective high-performance liquid chromatography method that allows, after liquid–liquid extraction and pre-column derivatization reaction with quercetin, the quantification of aluminium chlorohydrate in antiperspirant creams. Chromatographic separation was achieved on an XTerra MS C18 analytical column (150 × 3.0 mm i.d., particle size 5 μm) using a mobile phase of acetonitrile:water (15:85, v/v) containing 0.08 % trifluoroacetic acid at a flow rate of 0.30 mL min^?1. Ultraviolet spectrophotometric detection at 415 nm was used. The assay was linear over a concentration range of 3.7–30.6 μg mL^?1 for aluminium with a limit of quantitation of 3.74 μg mL^?1. Quality control samples (4.4, 17.1 and 30.6 μg mL^?1) in five replicates from five different runs of analysis demonstrated intra-assay precision (% coefficient of variation <3.8 %), inter-assay precision (% coefficient of variation <5.4 %) and an overall accuracy (% recovery) between 96 and 101 %. The method was used to quantify aluminium in antiperspirant creams containing 11.0, 13.0 and 16.0 % (w/w) aluminium chlorohydrate, respectively.     

Challenging Students to View the Concept of Area in Triangles in a Broad Context: Exploiting the Features of Cabri-II

This study focuses on the constructions in terms of area and perimeter in equivalent triangles developed by students aged 12–15 years-old, using the tools provided by Cabri-Geometry II [Labore (1990). Cabri-Geometry (software), Université de Grenoble]. Twenty-five students participated in a learning experiment where they were asked to construct: (a) pairs of equivalent triangles “in as many ways as possible” and to study their area and their perimeter using any of the tools provided and (b) “any possible sequence of modifications of an original triangle into other equivalent ones”. As regards the concept of area and in contrast to a paper and pencil environment, Cabri provided students with different and potential opportunities in terms of: (a) means of construction, (b) control, (c) variety of representations and (d) linking representations, by exploiting its capability for continuous modifications. By exploiting these opportunities in the context of the given open tasks, students were helped by the tools provided to develop a broader view of the concept of area than the typical view they would construct in a typical paper and pencil environment.     

Polarographische Bestimmung des Pyridoxols in pharmazeutischen Präparaten

Zusammenfassung Es wird eine neue polarographische Methode zur direkten Bestimmung des Pyridoxols in Injektionspräparaten und Tabletten beschrieben. Die ausgearbeitete Methode beruht auf der polarographischen Reduktion des Pyridoxolmoleküls im Milieu von Ammoniak-Ammoniumchlorid-Puffern und weiter auf der Bildung einer katalytischen Stufe des Pyridoxols in Veronalpuffern. Die polarographische Methode ist rascher und in manchen Fällen genauer und empfindlicher als die bisher in Gebrauch stehenden Methoden. Die Anwesenheit der in den Präparaten laufend vorkommenden Begleitstoffe des Pyridoxols stört nicht die polarographische Bestimmung. Die Methode kann auch zur Bestimmung des 3-Hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridins benutzt werden, das ein Zwischenprodukt bei der Pyridoxolerzeugung ist.

---

Summary A new polarographic method is described for the direct determination of pyridoxol in injection preparations and tablets. This method is based on the polarographic reduction of the pyridoxol in ammonia-ammonium chloride buffer medium and also on the formation of a catalytic stage of the pyridoxol in veronal buffers. The polarographic method is faster and in many cases more accurate and more sensitive than the methods now in use. The presence of the materials which always accompany the pyridoxol in the preparations does not interfere with the polarographic determination. The method can likewise be used for determining 3-hydroxy-4-methoxymethyl-5-oxymethyl-2-methylpyridine, which is an intermediate product in the manufacture of pyridoxol.

---

Résumé On décrit une nouvelle méthode polarographique pour le dosage direct du pyridoxol dans les préparations pour injections et dans les comprimés. La méthode élaborée repose sur la réduction polarographique de la molécule de pyridoxol dans le milieu tampon ammoniaque-chlorure d'ammonium, et, en outre, sur la formation d'une phase catalytique du pyridoxol dans les tampons au véronal. La méthode polarographique est plus rapide et dans de nombreux cas plus exacte et plus sensible que les méthodes utilisées jusqu'ici. La présence d'impuretés existant couramment dans les préparations à côté du pyridoxol ne gêne pas le dosage polarographique. On peut aussi utiliser la méthode pour le dosage de l'hydroxy-3 méthoxyméthyl-4 oxyméthyl-5 méthyl-2 pyridine, substance intermédiaire dans la préparation du pyridoxol.

---

---

Herrn Dr.P. Zuman danken wit für Ratsehläge bei der Abfassung dieser Arbeit.     

New gas chromatographic instrumentation for studying the action of sulfur dioxide on marbles

Reversed-flow gas chromatography, which is a sub-technique of inverse gas chromatography, is an experimental arrangement simulating a simple model for the action of air pollutants on buildings and monuments, in laboratory scale. By using a commercial gas chromatograph and an appropriate mathematical analysis, kinetic parameters such as rate constants for adsorption k1, adsorption/desorption kR and surface reaction k2, as well as surface diffusion coefficients Dgamma, deposition velocities Vd and reaction probabilities gamma of SO2 on marble surfaces at different temperatures (303.15-353.15 K) in the presence or in the absence of protective materials (an acrylic copolymer, Paraloid B-72 or a siloxane, CTS Silo 111) were calculated. From the above mentioned physicochemical quantities the ability of the examined materials to minimize the dry deposition of SO2 on marble is carrying out and a possible mechanism for the interaction between SO2 and Paraloid B-72 was suggested. Both materials (CTS SILO 111 and Paraloid B-72) are good enough for protecting marble against SO2 at low temperatures (303.15-323.15), while at high temperatures (333.15-353.15), siloxane seems to protect marble better than acrylic copolymer.     

Capillary waveguide fluoroimmunosensor with improved repeatability and detection sensitivity

An optical capillary waveguide fluoroimmunosensor based on glass capillaries internally coated with an ultrathin poly(dimethylsiloxane) (PDMS) film is presented. The evaluation of the capillaries developed was done in comparison with aminosilanized [3-(aminopropyl)triethoxysilane, APTES] glass and poly(methylpentene) (PMP) capillaries by immobilizing rabbit γ-globulins on the internal capillary wall. Following reaction with (R)-phycoerythrin-labelled antibody, the capillary was scanned with a laser beam and the fluorescence waveguided through the capillary wall was detected by a photomultiplier placed at one of its ends. The capillaries developed provided considerably improved protein coating homogeneity (intracapillary coefficients of variation 2.9–6.6%) and repeatability (intercapillary coefficients of variation 2.1–5.0%) compared with APTES-treated ones (7.9–13.4 and 8.5–15.2%, respectively). With use of these capillaries in a sandwich-type immunosensor for the determination of rabbit γ-globulins, the assay detection limit was improved eightfold (4.4 ng/mL) compared with that obtained using PMP capillaries (35.3 ng/mL), whereas the assay repeatability was improved threefold (intra-assay coefficients of variation 5.9–13.1%) compared with APTES-treated capillaries (15.6–36%). Optoelectronic set-up used to scan the capillaries (left) and representative fluorescence scannings of dual-band poly(methylpentene) (PMP), PDMS-modified glass and APTES treated glass capillaries     

Nanomaterials in Cementitious Composites: An Update

This review is an update about the addition of nanomaterials in cementitious composites in order to improve their performance. The most common used nanomaterials for cementitious materials are carbon nanotubes, nanocellulose, nanographene, graphene oxide, nanosilica and nanoTiO₂. All these nanomaterials can improve the physical, mechanical, thermal and electrical properties of cementitious composites, for example increase their compressive and tensile strength, accelerate hydration, decrease porosity and enhance fire resistance. Cement based materials have a very complex nanostructure consisting of hydration products, crystals, unhydrated cement particles and nanoporosity where traditional reinforcement, which is at the macro and micro scale, is not effective. Nanomaterials can reinforce the nanoscale, which wasn’t possible heretofore, enhancing the performance of the cementitious matrix.