污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能研究

亚甲基蓝和环丙沙星是水体中2种污染物, 对生态环境有潜在危害. 本文以市政剩余活性污泥为原料, 氯化锌为活化剂热解制备污泥基吸附剂, 研究盐酸酸洗浓度、氯化锌浓度、热解温度、热解时间等对污泥基吸附剂吸附水中亚甲基蓝和环丙沙星性能的影响. 结果表明 (1)污泥基吸附剂对亚甲基蓝的吸附性能随盐酸酸洗浓度的增大而增加, 对环丙沙星的吸附性能则随盐酸酸洗浓度的增大呈先降后增趋势, 两者均在1.500mol·L-1盐酸浓度下取得最优值. (2)污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能随氯化锌浓度和热解温度的增加呈先升后降趋势, 在氯化锌浓度为4.0mol·L-1、热解温度为500℃时有最优值; 随着热解时间的延长, 污泥基吸附剂对亚甲基蓝和环丙沙星的吸附性能分别在500℃热解70min和80min时有最优值. (3)污泥基吸附剂的最佳制备条件为 氯化锌4.0mol·L-1活化2h、500℃热解70min和80min、1.500mol·L-1盐酸酸洗; 以此制得的污泥基吸附剂对亚甲基蓝和环丙沙星的去除率分别为97.7%和96.4%, 平衡吸附量分别为97.9mg·g-1和3.9mg·g-1, 且污泥基吸附剂对亚甲基蓝和环丙沙星的吸附过程均符合准二级动力学方程.     

The stochastic energy-Casimir methodLa méthode d'énergie-Casimir stochastique

In this paper, we extend the energy-Casimir stability method for deterministic Lie–Poisson Hamiltonian systems to provide sufficient conditions for stability in probability of stochastic dynamical systems with symmetries. We illustrate this theory with classical examples of coadjoint motion, including the rigid body, the heavy top, and the compressible Euler equation in two dimensions. The main result is that stable deterministic equilibria remain stable in probability up to a certain stopping time that depends on the amplitude of the noise for finite-dimensional systems and on the amplitude of the spatial derivative of the noise for infinite-dimensional systems.     

Environmentally Compatible Access to α-Trifluoromethylseleno-Enones

α-Trifluoromethylselenolated enones constitute valuable building-blocks for further synthesis of innovative fluorinated compounds. Herein, we described an easy access to such compounds in green conditions through a Morita-Baylis-Hillman like reaction. These conditions have also been extended to higher fluorinated homologs.     

Fabric and connectivity as field descriptors for deformations in granular media

Granular materials involve microphysics across the various scales giving rise to distinct behaviours of geomaterials, such as steady states, plastic limit states, non-associativity of plastic and yield flow, as well as instability of homogeneous deformations through strain localization. Incorporating such micro-scale characteristics is one of the biggest challenges in the constitutive modelling of granular materials, especially when micro-variables may be interdependent. With this motivation, we use two micro-variables such as coordination number and fabric anisotropy computed from tessellation of the granular material to describe its state at the macroscopic level. In order to capture functional dependencies between micro-variables, the correlation between coordination number and fabric anisotropy limits is herein formulated at the particle level rather than on an average sense. This is the essence of the proposed work which investigates the evolutions of coordination number distribution (connectivity) and anisotropy (contact normal) distribution curves with deformation history and their inter-dependencies through discrete element modelling in two dimensions. These results enter as probability distribution functions into homogenization expressions during upscaling to a continuum constitutive model using tessellation as an abstract representation of the granular system. The end product is a micro-mechanically inspired continuum model with both coordination number and fabric anisotropy as underlying micro-variables incorporated into a plasticity flow rule. The derived plastic potential bears striking resemblance to cam–clay or stress–dilatancy-type yield surfaces used in soil mechanics.     

Micro–macro analysis of granular material behavior along proportional strain paths

When granular materials are subjected to proportional strain loading paths, they manifest a variety of behaviors depending on the initial void ratio of the specimen as well as the imposed dilatancy/contractancy rate. In some cases, the stress components may vanish over the duration of the test, and the specimen may progressively liquefy. To investigate this behavior, the authors have developed a kinematic approach to be deployed in two parts. First, numerical simulations are performed by means of a discrete element method. Secondly, two micromechanical models have corroborated the DEM results. The performance of these models may explain a number of microstructural mechanisms responsible for the macroscopic constitutive behavior.     

Long-wavelength Ultraviolet A1 and Visible Light Photoprotection: A Multimodality Assessment of Dose and Response

Human skin is exposed to visible light (VL; 400–700 nm) and long-wavelength ultraviolet A1 (UVA1) radiation (370–400 nm) after the application of organic broad-spectrum sunscreens. The biologic effects of these wavelengths have been demonstrated; however, a dose–response has not been investigated. Ten subjects with Fitzpatrick skin phototype IV-VI were enrolled. Subjects were irradiated with 2 light sources (80–480 J cm⁻²): one comprising VL with less than 0.5% UVA1 (VL+UVA1) and the other pure VL. Skin responses were evaluated for 2 weeks using clinical and spectroscopic assessments. 4-mm punch biopsies were obtained from nonirradiated skin and sites irradiated with 480 J cm⁻² of VL+UVA1 and pure VL 24 h after irradiation. Clinical and spectroscopic assessments demonstrated a robust response at VL+UVA1 sites compared with pure VL. Histology findings demonstrated a statistically significant increase in the marker of inflammation (P < 0.05) and proliferation (P < 0.05) at the irradiated sites compared with nonirradiated control. Threshold doses of VL+UVA1 resulting in biologic responses were calculated. Results indicate that approximately 2 h of sun exposure, which equates to VL+UVA1 dose (~400 J cm⁻²), is capable of inducing inflammation, immediate erythema and delayed tanning. These findings reinforce the need of photoprotection beyond the UV range.     

A model-free noise removal for the interpolation method of correlation and spectral estimation from laser Doppler data

A procedure to estimate and remove the contribution of data noise to the correlation function and the power spectral density calculated from laser Doppler data with the interpolation method is introduced. In comparison with earlier approaches, the new procedure is model free and, therefore, more objective. The new procedure is proven based on experimental data taken with a laser Doppler system, where the power spectral density obtained with the interpolation method is compared directly to data from a hot-wire reference measurement.     

Numerical stability analysis of submerged slopes subject to rapid sedimentation processes

In this paper, the stability of infinitely long submerged slopes subject to rapid sedimentation processes is theoretically/numerically investigated. In particular, rapid deposition is considered as a potential triggering factor for static liquefaction in inclined loose sand layers. The corresponding initial boundary value problem is numerically analysed by employing a one-dimensional finite difference scheme in conjunction with two distinct versions of the same constitutive model—elasto-plastic and elasto-viscoplastic (EV). The EV approach is shown to be the most suitable for describing the onset of liquefaction phenomena, since its mathematical well-posedness and numerical stability are never lost. The results of parametric analyses for both homogeneous and inhomogeneous strata are critically discussed in the light of some case history data concerning natural and anthropic sedimentation processes.