硫与Mn2O3空心球的复合结构及其在锂硫电池中的应用

在水热条件下,以碳球为模板合成了Mn₂O₃空心球,并用作锂硫电池的载硫基底材料。测试结果表明载硫量为51%的Mn₂O₃-S复合材料显示了较高的比容量,良好的循环稳定性和倍率性能。循环100圈后,最终可逆容量仍保持657 mA·g^-1,证明该Mn₂O₃空心球是一种有潜力的载硫基底材料。     

基于假设脱钩区间模型的省际节能减排压力测算以辽宁省为例

参照资源消耗及废物排放与经济增长的定量表达式-IGT方程和IGTX方程,分别推导出资源脱钩指数和二氧化碳排放指数方程.根据脱钩指数,将二氧化碳排放与GDP脱钩程度分为绝对脱钩、相对脱钩和未脱钩三种程度,并构建了假设相对脱钩和假设绝对脱钩区间.以辽宁省1995-2012年间二氧化碳排放量和GDP增长量为对象,分析了二者的脱钩关系.研究发现,除了1997和1999年二者处于相对脱钩状态,其余年份均未脱钩.运用假设脱钩区间模型,分别计算达到相对脱钩和绝对脱钩状态的二氧化碳年排放理想值,并与现值进行比较,得到各年节能减排的压力值.研究结果表明:相对脱钩的压力相对较小,减排压力在0-1671万t之间,占基准年碳排放量的0%-12.23%;绝对脱钩的压力较大,减排压力在320.77-4899.84万t,占基准年碳排放量的2.35%-23.94%.     

微波水热时间对C/C复合材料结构和抗氧化性能的影响

以磷酸、B4C和Al2O3为原料,采用一种新的微波水热法对C/C复合材料基体进行了抗氧化改性,重点研究了微波水热时间对改性试样物相组成、微观结构和抗氧化性能的影响。采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、能量色散谱仪(EDS)及X射线光电子能谱(XPS)对改性后试样进行了表征。结果表明:改性后复合材料表面覆盖了一层由熔融态的HPO3、B2O3和结晶的Al(PO3)3、微量B4C粒子组成的涂层。经60~120 min的微波水热改性,复合材料的抗氧化性能随着微波水热处理时间的延长而改善,达到一定程度后,其变化不再明显。微波水热处理100 min后的试样抗氧化性能最佳,在600℃静态空气气氛下氧化16 h后,氧化失重仅为9.5×10-4 g.cm-2,氧化失重速率维持在4.46×10-5 g.cm-2.h-1的极低水平。     

Influence of Control Parameters on the Competition Between Spiral Waves and Target Waves

In this paper we systematically investigate the influence of control parameters on the competition results between spiral waves and target waves. Driving frequency f , amplitude A and injection area n of the input signals are three important parameters and the competition results between spiral waves and target waves are influenced by these three parameters remarkably. Based on these understandings we can control spiral waves effectively by suitable combination these parameters to generate faster target waves. And the effective controllable parameter regions are also studied.     

氧分压对Ni/HfO_x/TiN阻变存储单元阻变特性的影响

采用射频磁控溅射的方法,基于不同氧分压制备的氧化铪构建了Ni/HfO_x/TiN结构阻变存储单元.研究发现,随着氧分压的增加,薄膜表面粗糙度略有降低;另一方面,阻变单元功耗降低,循环耐受性能可达10~3次,且转变电压分布的一致性得到改善.结合电流-电压曲线线性拟合结果及外加温度测试探究了器件的转变机理,得出在低阻态的传导机理为欧姆传导机理,在高阻态的传导机理为肖特基发射机理,并根据氧空位导电细丝理论,对高低阻态的阻变机理进行了详细的理论分析.     

Network dynamics and its relationships to topology and coupling structure in excitable complex networks

All dynamic complex networks have two important aspects, pattern dynamics and network topology. Discovering different types of pattern dynamics and exploring how these dynamics depend or/network topologies are tasks of both great theoretical importance and broad practical significance. In this paper we study the oscillatory behaviors of excitable complex networks （ECNs） and find some interesting dynamic behaviors of ECNs in oscillatory probability, the multiplicity of oscillatory attractors, period distribution, and different types of oscillatory patterns （e.g., periodic, quasiperiodic, and chaotic）. In these aspects, we further explore strikingly sharp differences among network dynamics induced by different topologies （random or scale-free topologies） and different interaction structures （symmetric or asymmetric couplings）. The mechanisms behind these differences are explained physically.     

Dynamic investigation of the finite dissolution of silicon particles in aluminum melt with a lower dissolution limit

The finite dissolution model of silicon particles in the aluminum melt is built and calculated by the finite difference method, and the lower dissolution limit of silicon particles in the aluminum melt is proposed and verified by experiments, which could be the origin of microinhomogeneity in aluminum-silicon melts. When the effects of curvature and interface reaction on dissolution are not considered; the dissolution rate first decreases and later increases with time. When the effects of curvature and interface reaction on dissolution are considered, the dissolution rate first decreases and later increases when the interface reaction coefficient （k） is larger than 10 1, and the dissolution rate first decreases and later tends to be constant when k is smaller than 10-3. The dissolution is controlled by both diffusion and interface reaction when k is larger than 10-3, while the dissolution is controlled only by the interface reaction when k is smaller than 10-4.     

风载对筒形高耸建筑物定向爆破倾倒过程影响的研究

对烟筒、水塔定向爆破的切口处进行了受力分析,着重考虑风载作用对倾倒力学条件的改变及对倾倒方向的影响,分析了转角、风载、切口大小之间的变化规律,并根据几个实例进行计算和分析。研究结果表明,风载对筒形高耸建筑物爆破倾倒方向有显著影响,风载增大时,偏转角呈线性增加,同时改变了中心轴的位置。计算时应根据建筑物的形状具体计算。     

相位差与一般相干迭加态压缩特性

研究一般相干态的迭加态|ψ＞=a|β＞ beiψ|mβeiδ＞的k次方压缩特性,结果表明:一般相干态的迭加态和量子涨落的k次方压缩,在m=1时可表为k≠2nπ/δ,此处n是整数;在m≠1时,压缩的次方数可以是偶数也可以是奇数;当δ=π时,无论m[m∈(0.∞)]取何值均存在奇次方压缩,当δ=π/2时,无论m取何值均存在奇次方压缩和偶次方压缩.这说明参数相位差δ对一般相干态的k次方压缩的次方数起关键性的作用.