首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   40篇
  免费   21篇
  国内免费   5篇
化学   16篇
力学   12篇
数学   2篇
物理学   36篇
  2023年   2篇
  2022年   2篇
  2020年   1篇
  2019年   1篇
  2015年   2篇
  2014年   4篇
  2013年   3篇
  2012年   2篇
  2011年   2篇
  2010年   3篇
  2009年   4篇
  2008年   1篇
  2007年   5篇
  2006年   2篇
  2005年   1篇
  2004年   1篇
  2003年   4篇
  2002年   4篇
  2001年   2篇
  2000年   4篇
  1999年   4篇
  1998年   6篇
  1997年   2篇
  1996年   1篇
  1994年   2篇
  1989年   1篇
排序方式: 共有66条查询结果,搜索用时 15 毫秒
1.
目前对质子交换燃料电池动态性能的研究多针对于运行参数对系统的影响,未涉及多时间尺度下电池的动态特性和相应多时间尺度模型的研究.为探明质子交换膜燃料电池动态变化时系统内各因素在不同时间尺度下对输出性能的影响效力,利用质量扩散方程及理想气体状态方程求得氧气和氢气有效分压,根据能量守恒定律、热力学定律、电化学反应方程建立动态模型.通过设置载荷突变(大、中、小时间尺度动态时长分别为0.6 s, 165 s, 16 min)研究负载电流突变时电压立即突变的机理,从作用于动态性能时长的时间常数着手,控制变量分析双层电荷层效应的电容C、燃料氧化剂的延迟时间常数τe、热力学特性(温度T)对动态性能的影响(变量初值为C=4 F,τe=80 s, T=307.7 K),明确其在不同时间尺度下的作用强度,借助Matlab/Simulink平台仿真呈现研究结果并验证所建模型的正确性和有效性.仿真结果表明:负载突变时电压突变是由于开路电压和欧姆极化电阻的作用且欧姆电阻占主导(欧姆过电压变化值2 V,开路电压变化0.05 V),小时间尺度(ms)下C对动态性能起主导作用,中时间尺度(s)下τe对动态特性影响较大,...  相似文献   
2.
我国沿海港口进出口箱分布非常不均衡,由此产生了集装箱空箱调运现象,合理的空箱调运策略能够有效地降低航运成本。本文研究了沿海港口间的空箱调运问题。在传统确定目的港策略的基础上,提出了一种新的空箱调运策略,不确定目的港策略。针对两种不同调运策略分别建立了以总调运费用最小为目标的规划模型。并以中国沿海港口空箱调运为例,运用遗传算法,在不同的空箱供需情况下,对两种调运策略费用进行了优化求解。结果表明,供需平衡模式下,固定目的港策略略有优势;在供需不平衡模式中,不确定目的港策略优势更加明显。此研究能够为港口间空箱调运提供辅助决策。  相似文献   
3.
The structural, elastic, electronic, and thermodynamic properties of ZrxNbl xC alloys are investigated using the first principles method based on the density functional theory. The results show that the structural properties of Zr~.Nb1 xC alloys vary continuously with the increase of Zr composition. The alloy possesses both the highest shear modulus (215 GPa) and a higher bulk modulus (294 GPa), with a Zr composition of 0.21. Meanwhile, the Zr0.2! Nb0.79C alloy shows metallic conductivity based on the analysis of the density of states. In addition, the thermodynamic stability of the designed alloys is estimated using the calculated enthalpy of mixing.  相似文献   
4.
超燃燃烧室气流参数诊断   总被引:7,自引:1,他引:6  
基于可调谐二极管激光器吸收光谱技术, 利用7185.597 cm^{-1}, 7444.35cm^{-1} + 7444.37cm^{-1}(重合吸收线)两条H_2O 吸收线, 采用分时扫描-直接探测策 略组建多光路吸收测量系统, 在4kHz的测量频率下, 定量测量了燃烧室气流的静温、水蒸气 浓度和流向速度. 利用位移机构, 在以C_2H_4为燃料的超燃直连式试验台中, 在单次试验中同 时诊断燃烧室内某截面和燃烧室出口的多气流参数的截面分布. 利用燃烧室出口截面的水蒸 气浓度分布, 并结合壁面静压计算燃烧效率; 利用燃烧室出口截面的静温和速度分布, 获得 出口气流马赫数分布; 利用凹腔后部某截面的温度和水蒸气浓度分布, 判读了凹腔附近流场 特征.  相似文献   
5.
<正>A 128×128 elements cylindrical liquid crystal(LC) lens array with electrically controllable focal length is proposed.The cylindrical LC lens array uses transparent indium tin oxide(ITO) films as electrode,avoiding to affect the optical path operating in the voltage-off status.As the top electrode of the cylindrical LC lens array contacts with LC,the operation voltage root-mean-square(RMS) amplitude can be as low as 1.4 V and the response time is about 20-30 ms.The special optical focusing feature of the cylindrical LC lens array is got.And the focal length of this array is about 60-450μm.  相似文献   
6.
MHD控制超声速边界层的理论研究和数值分析   总被引:2,自引:0,他引:2  
对MHD(mechanisms of magnetohy drodynamics)控制超声速平板湍流边界层的机理进行了理论研究和数值模拟.理论上,采用等离子体低频近似碰撞频率模型,建立等离子体中电子和离子的力平衡方程,得到等离子体速度、极化电场以及边界层速度.数值上,通过空间HLLE格式、LU-SGS时间推进求解时均磁流体动力学湍流方程,其中湍流模型采用sst-kω双方程模型.研究结果表明:(1)边界层速度的理论结果和数值结果误差在7%范围内;(2)只有磁场而电场为零时,洛仑兹力起到减小摩阻的作用.施加电场后,洛仑兹力能够加速边界层低速区流体;(3)在边界层外层,越靠近壁面,作用参数越小;而在边界层近壁区黏性底层,虽然惯性力减小,但黏性力却迅速增加,因此越靠近壁面,作用参数反而越大,加速低速流的代价增加.  相似文献   
7.
Cylinder-shaped CusoNi20 alloy melt is undercooled and solidified by the combination of the electromagnetic levitation technique and the flux treatment method. Nearly constant temperature gradient of 8-10 K/cm is realized for the cylindrical melts with differen~ undercooling levels at the bottom ends. The experimental results reveal that with the increase of the undercoo]ing of the melts from 35 to 220 K, the microstructures undergo transition from coarse dendrites to granular grains, unidirectional dendrites, and finally to equiaxed grains.  相似文献   
8.
利用原子力显微镜的探针将石墨的双原子厚片层进行撕裂操作,发现石墨片层只沿特定的方向撕裂和折叠;进一步还发现被撕开的片层在探针的作用力下有可能被压缩或拉伸,被压缩的片层会恢复到原来的形状,但被拉伸的片层却不能恢复到原来的形状.  相似文献   
9.
The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.  相似文献   
10.
讨论了制作适用于近场集成光学头中的凸形、凹形微透镜和折衍射复合微透镜的灰度掩模技术。定性地给出了与几种典型的凸形、凹形微透镜和折衍射复合微透镜对应的灰度掩模版的设计实例 ,以及将它应用于光刻操作的情况 ,为采用灰度掩模技术制作适用于近场集成光学头中的微透镜器件奠定了基础。灰度掩模技术在微透镜器件的制作方面具有重要的应用前景 ,有助于简化制备工艺 ,降低制作成本 ,优化微透镜阵列的结构参数。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号