Chiral separation abilities of homogeneously synthesized cellulose 3,5-dimethylphenylcarbamates: Influences of degree of substitution and molecular weight

A series of cellulose 3,5-dimethylphenylcarbamates(CDMPCs) with different degrees of substitution(DS) and degrees of polymerization(DP) were homogeneously synthesized in 1-allyl-3-methylimidazolium chloride(Amim Cl). Then, the CDMPCs were coated on silica gel and used as chiral stationary phases(CSPs), and their chiral recognition abilities for seven racemates were evaluated by high performance liquid chromatography. The results showed that DS and DP of CDMPCs had a great influence on chiral recognition abilities of the CSPs. The CSPs with the DS ≈ 1 gives a low chiral recognition to most racemates. On the contrast, the CSPs with the DS ? 2 exhibited high chiral separation abilities. For example, six racemates could be separated on the CSP with CDMPC of DS ≈ 2(CSP-2). Especially, for the enantioseparation of 1-(2-naphthyl) ethanol and Tr?ger's base, CSP-2 gave the highest separation ability in all of CSPs. On the other hand, when the DP of cellulose was in a range from 39 to 220, the chiral separation abilities of CDMPCs increased as the DP increased. This work demonstrates that the structure of cellulose esters such as DS and DP has important effect on their chiral separation ability, and therefore provides a practical method to design and prepare desirable CSPs for different racemates.     

Synthesis and characterization of temperature-sensitive cellulose-graft-poly(N-isopropylacrylamide) copolymers

A new series of cellulose-graft-poly(N-isopropylacrylamide)(cellulose-g-PNIPAM) copolymers were prepared by atom transfer radical polymerization(ATRP) of N-isopropylacrylamide monomers from a cellulose-based macro-initiator, which was homogeneously synthesized in an ionic liquid 1-allyl-3-methylimidazolium chloride(Amim Cl). The composition of cellulose-g-PNIPAM copolymers could be adjusted by altering the feeding ratio and reaction time. The resultant copolymers with relatively high content of PNIPAM segments(molar substitution of PNIPAM ? 18.3) were soluble in water at room temperature. Aqueous solutions of cellulose-g-PNIPAM copolymers exhibited clear temperature-sensitive behavior, and their sol-to-gel phase transition properties were investigated by dynamic light scattering(DLS) and UV measurements. Compared with pure PNIPAM, the cellulose-g-PNIPAM copolymers possessed higher lower critical solution temperatures(LCST) in a range from 36.9 ?C to 40.8 ?C, which are close to normal human body temperature, and could be tuned by adjusting the content of PNIPAM segments in copolymers. Spherical structure of cellulose-g-PNIPAM copolymers formed at temperatures above LCST and its morphology was observed by TEM and SEM. These novel cellulose-g-PNIPAM copolymers may be attractive substrates for some biomedical applications, such as drug release and tissue engineering.     

高维线性插值方法及其在3维温度场计算中的应用

通过分析1维和2维线性插值可以推导出任意斜角直线坐标系下n维线性插值的一般计算公式以及有唯一解的条件,这一结论能够应用于三维温度场计算。可以将n维插值问题归结如下:已知n 1维空间中的n 1个点的坐标以及第n 2个点的n个坐标分量xn 2,1,x n 2,2,,xn 2,n,求解该点的第n 1个坐标分量xn 2,n 1。根据线性插值定义,第n 2个点位于前n 1个点所确定的n维超平面上。根据这一条件列写方程、求解方程可得到插值xn 2,n 1。n维插值问题有唯一解的条件是已知的n 1个点在n维空间中构成的多面体的体积不为0。推导过程在斜角直线坐标系中完成,因而结论具有较大普适性。     

反演在骨生长方程参数识别中的应用

基于BFGS算法，根据自行设计的动物实验，得到在不同应力环境中，快速生长期大鼠股骨生 长与重建过程中骨密度实测数据，采用反演数值方法，获取了骨生长方程中随时间变化的 生物参数B和K. 通过正演验证，表明所建立的基于BFGS算法的参数识别方法具有较好的 稳定性和较高的识别精度，能够反演出比较切合实际的生物参数数值. 研究表明，反问 题方法是解决生命现象不可测性和未知性问题的有效手段，把反演方法应用到骨生长与重建 等生命现象的研究中，可确定、修正预设的数学模式，为数值量化骨适应生物模型的建立提 供了一条可行的途径.     

用HLLC方法处理运动边界

针对含有运动边界非结构网格点的显式有限体积方法，研究了如何使用HLLC方法处理运动边界条件，计算了活塞拉伸、压缩问题，并和解析解进行了比较．作为应用示例，比较了静止圆柱绕流和静止流场中运动圆柱的绕流情形。结果表明：应用HLLC方法处理运动边界是可行的。     

基于石墨烯的光纤湿度传感研究

将还原氧化石墨烯(r GO)沉积在侧边抛磨光纤(SPF)上制作了一种新型的光纤湿度传感器。在高湿度区域[相对温度(RH)为70%~95%],传感器的光功率变化达到6.9 d B,尤其在RH为75%~95%区域,传感器对湿度变化能实现相关系数为98.2%的线性响应,灵敏度可达0.31 d B/(%RH),响应速度快于0.13(%RH)/s,并且具有很好的可重复性。对传感机理的理论分析可以解释实验结果,并且表明这种基于石墨烯的光纤传感器亦可广泛应用于其他种类化学气体的探测。这种全新机理的光学传感器是对石墨烯电化学传感器的一种很好的补充,并将促进石墨烯在化学传感技术中的应用。     

三轴速调管放大器自激振荡诊断

为满足X波段三轴速调管放大器(TKA)各腔内部自激振荡的诊断需求,设计了一种结构简单紧凑、无需外部密封结构的新型波导耦合器。利用小孔耦合原理和CST仿真软件,针对TKA中常见的自激振荡TE61模式,对该耦合器的耦合特性进行了理论分析和仿真设计。结合PIC方法,建立了利用该耦合器诊断TKA同轴漂移管内传输微波频谱特性的物理模型。通过仿真计算,验证了所设计的耦合器用于TKA自激振荡诊断的有效性。     

基于U型弯曲光纤模间干涉的折射率传感

研究了去包层U型弯曲光纤的折射率传感特性.首先根据模间干涉理论,分析了U型光纤传感器的传感原理,指出干涉谱损耗峰波长与环境折射率和弯曲半径有关.利用单模光纤(SM-28)实验制作不同曲率半径的U型光纤传感器,把传感器的U型部分浸入不同折射率的液体中,研究其折射率传感特性.当U型光纤曲率半径为2.5~5.0mm时,传输光谱中均能观察到明显的模间干涉现象;当液体折射率从1.30RIU变到1.43RIU时,光谱损耗峰波长发生红移,且弯曲半径越大,折射率传感灵敏度越高;在曲率半径为5mm时灵敏度为207nm/RIU(折射率1.30~1.40RIU)和1 220nm/RIU(折射率1.40~1.42RIU).干涉峰的波形参量(半高宽、对比度)决定于包层模和纤芯导模之间的比例,当曲率半径为4mm时,损耗峰半高宽最小达3.2nm.综合半高宽和灵敏度两个参量,得出曲率半径4.5mm的U型光纤传感器品质因素最高,分别为43.1RIU-1(折射率1.30~1.40RIU)和191.2RIU-1(折射率1.40~1.42RIU),可直接由SM-28单模光纤制成,且制作工艺简单、成本低、机械强度高不需要任何特殊处理,具有很好的应用前景.     

卫星减振的试验研究

根据某卫星发射对减振性能的要求,本文提出在适配器与星箭界面之间安装整星隔振器并且在适配器表面粘贴约束阻尼层的减振方案。并且利用振动台分别对卫星减振系统施加垂向和横向的基础激励,测量卫星上关键位置处的加速度响应,比较减振前后其频率响应特性的变化,以验证卫星减振方案的减振性能。试验结果的对比分析验证了此卫星减振系统能够隔离卫星高频段的横向和垂向振动,降低卫星结构频率响应的幅值,能够减小运载火箭发射时传递给卫星的环境载荷,提高卫星发射的可靠性。本文对于相关的航天器的减振设计具有实用的参考价值。     

高效液相色谱法测定地塞米松及有关物质

建立了高效液相色谱法测定地塞米松及有关物质的方法。采用Kromasil 100-5 C_(18)(250 mm×4. 6 mm,5μm)色谱柱,以水和乙腈为流动相,梯度洗脱,流速1. 5 mL/min,检测波长240 nm,柱温40℃,进样量20μL。在上述色谱条件下,地塞米松与1,2-二氢物、16β-甲基环氧物和17-脱氧-21醇等杂质分离效果好,地塞米松在4～480μg/mL范围内线性关系良好,检测限为0. 32μg/mL,1,2-二氢物、16β-甲基环氧物和17-脱氧-21醇在0. 2～4. 0μg/mL范围内线性关系良好,检测限分别为0. 058,0. 063,0. 060μg/mL。方法可用于测定地塞米松及有关物质的含量。