Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Linear optical switching in a FLC/waveguide composite device

A fast electrooptic modulation in a polymer waveguide using a ferroelectric liquid crystal has been proposed. In this device, the surface stabilized ferroelectric liquid crystal and the soft mode ferroelectric liquid crystal are used as an active material on the passive polymer waveguide, and electrooptic switching is realized by controlling the total reflection at the polymer waveguide-liquid crystal interface. The response time is of the order of several microseconds. The analogue electrooptic modulation in the waveguide is realized using the field induced linear molecular tilt of the electroclinic effect in the soft mode ferroelectric liquid crystal.     

A fast atom bombardment mass spectrometric analysis of crown ether complexes [1]

Analyses of crown ether complexes of alkali metal ions and characterization of the complexes formed inm-nitrobenzyl alcohol have been carried out by fast atom bombardment (FAB) mass spectrometry. By using m-nitrobenzyl alcohol as a matrix for measurements, the stoichiometry of the complexes was assessed on the basis of the observed FAB peaks. In addition, the formation of crown ether-alkali metal complexes at a 2 : 1 molar ratio was enhanced by increasing the ionic radius of the metal ion in agreement with previous observations. On these grounds, FAB mass spectrometry may provide a rapid means for investigation of the complexation behavior of crown ethers and the stoichiometry of the complexes.     

Simple and rapid determination of hydrogen peroxide using phosphine-based fluorescent reagents with sodium tungstate dihydrate.

A simple batch method for the fluorometric determination of hydrogen peroxide using phosphine-based fluorescent reagents has been developed. A rapid, mild and selective derivatization reaction was achieved by adding sodium tungstate dihydrate to the reaction mixture of hydrogen peroxide and a phosphine-based fluorescent reagent. When 4-diphenylphosphino-7-methylthio-2,1,3-benzoxadiazole was used as a reagent, the derivatization reaction was completed after 2 min at room temperature. The calibration curve was linear between 12.5 and 500 ng hydrogen peroxide in a 10 microL sample solution. This method is accurate and has potential for on-line applications.     

Enzyme-less amperometric biosensor for l-ascorbate using poly-l-histidine-copper complex as an alternative biocatalyst

A poly-l-histidine(PLH)-copper(II) complex can be used as an alternative biocatalyst in an O(2) detection-type amperometric enzyme-less l-ascorbate (AsA) sensor. The PLH-Cu(II) membrane was simply prepared by entrapping the PLH in polyacrylamide gel and subsequent treatment of the gel with CuCl(2) solution. This enzyme-less biosensor can be used over a relatively wide pH region from 4 to 11 and enables precise determination of AsA (RSD less than 3%, n=10) at pH 7.0. The fundamental performance characteristics (sensitivity, response time, and linear range) of this PLH-Cu(II)-based sensor is comparable to those of a native ascorbate oxidase-based sensor. Unfortunately, the selectivity is inherently rather low and, as a result, the response was degraded in the presence of higher concentrations (more than mM order) of quinones. However, reducing sugars caused no interference and the sensor could be used to detect AsA in some fruits and drinks. This enzyme-less sensor has excellent stability for at least 3 months of repeated analysis (more than 300 samples) without loss of ordinal activity.     

Measurement of acid-catalyzed isomerization of unsaturated aldehyde-2,4-dinitrophenylhydrazone derivatives by high-performance liquid chromatography analysis

Aldehyde-2,4-dinitrophenylhydrazones exist as (E)- and (Z)-geometrical isomers, and adventitious isomerization during sample preparation can cause analytical errors. Purified alkenal-2,4-dinitrophenylhydrazone derivatives comprise only the (E)-isomer. However, partial isomerization to the (Z)-isomer occurs upon addition of acid to attain an equilibrium isomer ratio. The UV-visible spectral properties of the isomers differ; the (Z)-isomer exhibiting a 6-10 nm lower absorption maximum compared to the (E)-isomer. Alkenal-2,4-dinitrophenylhydrazones having a CC double bond at the 2- or 3-position of the alkenal exhibited similar absorption maxima with an equilibrium isomer ratio (0.035) that was much lower than those of other alkenals. The CC double bond at the 3-position migrates to a position of conjugation with the CN double bond during hydrazone synthesis to form a stabilized molecular structure. Alkenal-2,4-dinitrophenylhydrazones having a double bond at the 4-position or greater exhibited a similar absorption maxima equilibrium isomer ratio (0.14) to alkanal-2,4-dinitrophenylhydrazones. The quantitative analysis of carbonyl compounds in air or water using DNPH is usually conducted in the presence of an acid catalyst. Consequently, the solution of the direct extract prepared for HPLC or GC analysis contains both (E)- and (Z)-isomers.     

Determination of urea by ion chromatography with an immobilized urease reactor

An immobilized urease reactor can be used with ion chromatography for the simultaneous determination of urea, and sodium, potassium and ammonium ions. The conversion of urea to ammonium ion was found to be 76.5%. The calibration graph for urea was linear over the range 1 × 10^?5?1 × 10^?3 M (RSD 3%). The method was applied to human urine and a chemical fertilizer.     

Improvement of chemical analysis of antibiotics. X. Determination of eight tetracyclines using thin-layer and high-performance liquid chromatography

Analytical methods for eight tetracyclines (TCs) were established using silica gel high-performance thin-layer chromatography (HPTLC), reversed-phase thin-layer chromatography (RP-TLC) and high-performance liquid chromatography (HPLC). Good separations of eight TCs were obtained using chloroform-methanol-5% disodium ethylenediaminetetraacetate solution (65:20:5) (lower layer) and methanol acetonitrile 0.5 M oxalic acid solution (1:1:4) (pH 3.0) on silica gel HPTLC and C8 TLC plates, respectively. A combination of HPTLC and RP-TLC made possible the identification of the eight TCs. Each calibration graph was linear between 0.1 and 1.0 microgram using UV densitometry except for rolitetracycline. For detection reagents, the diazonium salts including Fast Violet B gave variously coloured spots with the eight TCs and good sensitivities were obtained except with minocycline. In HPLC, the simultaneous analysis of the eight TCs on a C8 column was possible using methanol-acetonitrile-0.01 M oxalic acid solution (1:1.5:7) adjusted to pH 3.0 as the mobile phase. A linear relationship was obtained between 1.0 and 10 ng using the usual sample preparation except for rolitetracycline. The direct determination of rolitetracycline was possible using tetrahydrofuran, dimethyl sulphoxide and the mobile phase as solvents for preparation of the sample. For the determination of residual rolitetracycline, it was effective to measure the amount of rolitetracycline as tetracycline by HPLC, HPTLC and RP-TLC after conversion of rolitetracycline to tetracycline by incubating for 5 min in methanol at 50 degrees C.     

Fluorogenic and fluorescent labeling reagents with a benzofurazan skeleton

Fluorogenic and fluorescent labeling reagents having a benzofurazan (2,1,3-benzoxadiazole) skeleton such as 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F), 4-N,N-dimethylaminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (DBD-F), 4-aminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (ABD-F), ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate (SBD-F), 4-hydrazino-7-nitro-2,1,3-benzoxadiazole (NBD-H), 4-N,N-dimethylaminosulfonyl-7-hydrazino-2,1,3-benzoxadiazole (DBD-H), 4-nitro-7-N-piperazino-2,1,3-benzoxadiazole (NBD-PZ), 4-N,N-dimethylaminosulfonyl-7-N-piperazino-2,1,3-benzoxadiazole (DBD-PZ), 4-(N-chloroformylmethyl-N-methyl)amino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole (DBD-COCl) and 7-N,N-dimethylaminosulfonyl-4-(2,1,3-benzoxadiazolyl) isothiocyanate (DBD-NCS) are reviewed in terms of synthetic method, reactivity, fluorescence characteristics, sensitivity and application to analytes.