Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Linear optical switching in a FLC/waveguide composite device

A fast electrooptic modulation in a polymer waveguide using a ferroelectric liquid crystal has been proposed. In this device, the surface stabilized ferroelectric liquid crystal and the soft mode ferroelectric liquid crystal are used as an active material on the passive polymer waveguide, and electrooptic switching is realized by controlling the total reflection at the polymer waveguide-liquid crystal interface. The response time is of the order of several microseconds. The analogue electrooptic modulation in the waveguide is realized using the field induced linear molecular tilt of the electroclinic effect in the soft mode ferroelectric liquid crystal.     

A fast atom bombardment mass spectrometric analysis of crown ether complexes [1]

Analyses of crown ether complexes of alkali metal ions and characterization of the complexes formed inm-nitrobenzyl alcohol have been carried out by fast atom bombardment (FAB) mass spectrometry. By using m-nitrobenzyl alcohol as a matrix for measurements, the stoichiometry of the complexes was assessed on the basis of the observed FAB peaks. In addition, the formation of crown ether-alkali metal complexes at a 2 : 1 molar ratio was enhanced by increasing the ionic radius of the metal ion in agreement with previous observations. On these grounds, FAB mass spectrometry may provide a rapid means for investigation of the complexation behavior of crown ethers and the stoichiometry of the complexes.     

Simple and rapid determination of hydrogen peroxide using phosphine-based fluorescent reagents with sodium tungstate dihydrate.

A simple batch method for the fluorometric determination of hydrogen peroxide using phosphine-based fluorescent reagents has been developed. A rapid, mild and selective derivatization reaction was achieved by adding sodium tungstate dihydrate to the reaction mixture of hydrogen peroxide and a phosphine-based fluorescent reagent. When 4-diphenylphosphino-7-methylthio-2,1,3-benzoxadiazole was used as a reagent, the derivatization reaction was completed after 2 min at room temperature. The calibration curve was linear between 12.5 and 500 ng hydrogen peroxide in a 10 microL sample solution. This method is accurate and has potential for on-line applications.     

Isomerization of aldehyde-2,4-dinitrophenylhydrazone derivatives and validation of high-performance liquid chromatographic analysis

The most widely used method for qualitative and quantitative analysis of carbonyl compounds is the 2,4-dinitrophenylhydrazine method through the formation of 2,4-dinitrophenylhydrazone derivatives. However, this method may cause an analytical error because 2,4-dinitrophenylhydrazones have both E- and Z-stereoisomers. Purified aldehyde-2,4-dinitrophenylhydrazone demonstrated only the E-isomer. However under UV irradiation and the addition of acid, both E- and Z-isomers were seen. The spectral patterns of Z-isomers were different from those of E-isomers and the absorption maximum wavelengths were shifted towards shorter wavelengths by 5-8 nm. An equilibrium Z/E isomer ratio was observed in 0.02-0.2% (v/v) phosphoric acid solutions. In the case of acetaldehyde- and propanal-2,4-dinitrophenylhydrazones, the equilibrium Z/E isomer ratios were 0.32 and 0.14, respectively. However, when irradiated with ultraviolet light at 364 nm, the isomer ratios were increased beyond this constant ratio and reached 0.55 and 0.33, respectively. Zero-order rates for decreases of aldehyde derivatives were observed under UV irradiation (364 nm), however the decreases of concentration were not observed in phosphoric acid solutions. The best method for the determination of aldehyde-2,4-dinitrophenylhydrazones by HPLC is to add phosphoric acid to both the sample and the standard solution, to form a 0.02-1% acid solution.     

On the interpretation of solubilization results obtained from semi-equilibrium dialysis experiments

The interpretation of intramicellar solubilization data obtained from semi-equilibrium dialysis (SED) experiments is described, and methods are presented for determining equilibrium constants for the solubilization of organic species by aqueous surfactant solutions as well as activity coefficients of both the organic solute and the surfactant within the micelle. The solubilization equilibrium constant of an organic solute in an aqueous micellar solution (K) is defined as the ratio of the mole fraction of organic solute in the micellar pseudophase (X) to the concentration of the unsolubilized monomeric organic solute in the aqueous phase (c ₀). Expressions compatible with the Gibbs-Duhem equation are used to represent the concentration dependence of activity coefficients of both the solubilizate and surfactant in the micellar pseudophase; the analysis leads to calculated values of the concentrations of free and intramicellar surfactant and organic solute in both compartments of the equilibrium dialysis cell. Solubilization equilibrium constants for many amphiphiles are well correlated by the simple expressionK=K ₀(1-BX)², whereB is an empirical constant andK ₀ is the limiting value ofK asX approaches 0.     

Improvement of chemical analysis of antibiotics. IX. A simple method for residual tetracyclines analysis in honey using a tandem cartridge clean-up system

A simple, rapid and precise analytical method for the residual tetracyclines in honey has been established using a tandem cartridge clean-up system (prepacked reversed-phase and ion-exchange cartridges) followed by high-performance liquid chromatography. The recoveries of oxytetracycline (OTC), tetracycline (TC), chlortetracycline (CTC) and doxycycline (DC) from honey spiked at a level of 1.0 ppm are 87.1, 85.3, 98.0 and 99.0%, respectively, with coefficients of variation of 1.1-3.9%. The detection limits in honey are 0.02 ppm for OTC and TC, and 0.05 ppm for CTC and DC, respectively. The time required for the analysis of four samples is only 1 h.     

Solubilization of oleyl alcohol by pure and mixtures of surfactants

The solubilization behavior of oleyl alcohol by pure and mixtures of surfactants systems have been studied in terms of the maximum additive concentration (MAC), the solubilizing power, and the particle sizes of micelles with or without oleyl alcohol. The surfactants used are amphoteric (N,N-dimethyl-N-lauroyl lysine, DMLL; N,N,N-trimethyl-N-lauroyl lysine, TMLL; N,N-dimethyl-N-(carboxymethyl)-lauryl ammonium, DMCL), anionic (sodium dodecyl sulfate, SDS) and nonionic (alkyl polyoxyethylene ethers).The maximum additive concentration of oleyl alcohol by pure surfactants is larger by nonionic surfactants than by others.For a nonionic surfactant system mixed with DMLL, the mixing effect of surfactant on the increase in the MAC is not recognized. While, for DMLL mixed with SDS, the MAC becomes larger than that by pure surfactants. This may be attributed to the fact that the large micellar size will result in increasing the maximum additive concentration.     

Effect of polymer as cosolvent on chemical reactions in solution—I. Effects of polystyrene and polyoxyethylene on the reaction of dansyl chloride with butylamine in organic solvents

The rates of reactions of 5-dimethylamino-1-naphthalenesulphonyl chloride (dansyl chloride) with butylamine in organic solvents have been measured in the presence of polymer such as polyoxyethylene (POE) or polystyrene (PS) as cosolvent and compared with those in the presence of cosolvents of low molecular weight analogues, viz. diethyloxyethane (DEE) and toluene (Tol.). Acceleration by cosolvent POE, compared with DEE, increases with increasing volume fraction of cosolvent and the effect depends on the degree of polymerization of the polymer cosolvent. Similarly, addition of cosolvent PS to ethyl acetate or chloroform results in increase in the reaction rate as compared with cosolvent Tol. The effect by PS also showed dependence on the degree of polymerization. The effect of polymer cosolvent on chemical reactions between two low molecular weight species is explained in terms of the thermodynamics of polymer solutions.     

Influence of amino acid side chain packing on Fe-methionine coordination in thermostable cytochrome C

Paramagnetic NMR and optical studies of the oxidized forms of mesophile Pseudomonas aeruginosa cytochrome c(551) and its quintuple mutant (F7A/V13M/F34Y/E43Y/V78I), and thermophile Hydrogenobacter thermophilus cytochrome c(552) demonstrated that the amino acid side chain packings in the protein interior influence the coordination bond between the heme iron and the axial methionine in the proteins. The strength of heme axial coordinations was found to correlate with the overall protein thermostability.