Validation of an analytical method to quantify the permeation and penetration of flurbiprofen into human pharynx tissue

The aim of this investigation was to develop receiver and extraction fluids, and subsequently validate an analytical method to quantify the permeation and penetration of flurbiprofen into human pharynx tissue using a Franz diffusion cell. The solubility and stability of flurbiprofen in a suitable receiver fluid, and a suitable extraction method and fluid to recover and quantitate flurbiprofen from human pharynx tissue, were investigated using high‐performance liquid chromatography (HPLC). The potential interference of human pharynx tissue in the receiver fluid was also investigated. The HPLC analytical method was successfully validated according to current guidelines. The final receiver fluid demonstrated sufficient solubility and stability, and the extraction method and fluid resulted in >95% recovery of flurbiprofen following exposure to human pharynx tissue. The lower limit of quantitation of flurbiprofen was 0.045 μg/mL in both the receiver and extraction fluids. There was no interference of the human pharynx tissue with the HPLC method. This investigation validated an analytical method for quantitating flurbiprofen, and determined a suitable receiver fluid and extraction method and fluid, which can be used to investigate the permeation and penetration of flurbiprofen through human pharynx tissue using the Franz diffusion cell method.     

Intrinsic relaxation rates of polarized Cs vapor in miniaturized cells

The intrinsic relaxation rates of the vector magnetization of cesium vapor enclosed in microfabricated atomic magnetometer cells are investigated. Two methods—the optically detected magnetic resonance and the ground-state Hanle effect—are used to carry out automated measurements in dependence on cell temperature and nitrogen buffer gas pressure. The experimental results are compared with expected contributions of the different relaxation processes and in this way allow the discrimination between them to help further optimization of cell design. The methods are compared in terms of basic features, data quality, and practical applicability.     

α-Glucosidase inhibitory activity of marine sponges collected in Mauritius waters

This report describes the use of α-glucosidase to evaluate the anti-diabetic potential of extracts from marine sponges collected in the Mauritius waters. Initial screening at 1.0 mg/mL of 141 extracts obtained from 47 sponge species revealed 10 extracts with inhibitory activity greater than 85%. Seven of the 10 extracts were further tested at 0.1 and 0.01 mg/mL and only the methanol extract of two sponges namely Acanthostylotella sp. (ASSM) and Echinodictyum pykei (EPM) showed inhibition activity greater than 60% at 0.1 mg/mL with an IC₅₀ value of 0.16 ± 0.02 and 0.04 ± 0.01 mg/mL, respectively, while being inactive at 0.01 mg/mL.     

Inverse colloidal crystal membranes for hydrophobic interaction membrane chromatography

A collaborative study on the robustness and portability of a capillary electrophoresis‐mass spectrometry method for peptide mapping was performed by an international team, consisting of 13 independent laboratories from academia and industry. All participants used the same batch of samples, reagents and coated capillaries to run their assays, whereas they utilized the capillary electrophoresis‐mass spectrometry equipment available in their laboratories. The equipment used varied in model, type and instrument manufacturer. Furthermore, different types of sheath‐flow capillary electrophoresis–mass spectrometry interfaces were used. Migration time, peak height and peak area of ten representative target peptides of trypsin‐digested bovine serum albumin were determined by every laboratory on two consecutive days. The data were critically evaluated to identify outliers and final values for means, repeatability (precision within a laboratory) and reproducibility (precision between laboratories) were established. For relative migration time the repeatability was between 0.05 and 0.18% RSD and the reproducibility between 0.14 and 1.3% RSD. For relative peak area repeatability and reproducibility values obtained were 3–12 and 9–29% RSD, respectively. These results demonstrate that capillary electrophoresis‐mass spectrometry is robust enough to allow a method transfer across multiple laboratories and should promote a more widespread use of peptide mapping and other capillary electrophoresis‐mass spectrometry applications in biopharmaceutical analysis and related fields.     

Tetraarylborate polymer networks as single-ion conducting solid electrolytes

A new family of solid polymer electrolytes based upon anionic tetrakis(phenyl)borate tetrahedral nodes and linear bis-alkyne linkers is reported. Sonogashira polymerizations using tetrakis(4-iodophenyl)borate, tetrakis(4-iodo-2,3,5,6-tetrafluorophenyl)borate and tetrakis(4-bromo-2,3,5,6-tetrafluorophenyl)borate delivered highly cross-linked polymer networks with both 1,4-diethynylbeznene and a tri(ethylene glycol) substituted derivative. Promising initial conductivity metrics have been observed, including high room temperature conductivities (up to 2.7 × 10^–4 S cm^–1), moderate activation energies (0.25–0.28 eV), and high lithium ion transport numbers (up to t _Li⁺ = 0.93). Initial investigations into the effects of important materials parameters such as bulk morphology, porosity, fluorination, and other chemical modification, provide starting design parameters for further development of this new class of solid electrolytes.     

Dynamic algorithm selection for pareto optimal set approximation

This paper presents a meta-algorithm for approximating the Pareto optimal set of costly black-box multiobjective optimization problems given a limited number of objective function evaluations. The key idea is to switch among different algorithms during the optimization search based on the predicted performance of each algorithm at the time. Algorithm performance is modeled using a machine learning technique based on the available information. The predicted best algorithm is then selected to run for a limited number of evaluations. The proposed approach is tested on several benchmark problems and the results are compared against those obtained using any one of the candidate algorithms alone.     

Experimental Confirmation of a Predicted Porous Hydrogen-Bonded Organic Framework

Hydrogen-bonded organic frameworks (HOFs) with low densities and high porosities are rare and challenging to design because most molecules have a strong energetic preference for close packing. Crystal structure prediction (CSP) can rank the crystal packings available to an organic molecule based on their relative lattice energies. This has become a powerful tool for the a priori design of porous molecular crystals. Previously, we combined CSP with structure-property predictions to generate energy-structure-function (ESF) maps for a series of triptycene-based molecules with quinoxaline groups. From these ESF maps, triptycene trisquinoxalinedione (TH5) was predicted to form a previously unknown low-energy HOF (TH5-A) with a remarkably low density of 0.374 g cm⁻³ and three-dimensional (3D) pores. Here, we demonstrate the reliability of those ESF maps by discovering this TH5-A polymorph experimentally. This material has a high accessible surface area of 3,284 m² g⁻¹, as measured by nitrogen adsorption, making it one of the most porous HOFs reported to date.     

Inherent Ethyl Acetate Selectivity in a Trianglimine Molecular Solid

Ethyl acetate is an important chemical raw material and solvent. It is also a key volatile organic compound in the brewing industry and a marker for lung cancer. Materials that are highly selective toward ethyl acetate are needed for its separation and detection. Here, we report a trianglimine macrocycle ( TAMC ) that selectively adsorbs ethyl acetate by forming a solvate. Crystal structure prediction showed this to be the lowest energy solvate structure available. This solvate leaves a metastable, “templated” cavity after solvent removal. Adsorption and breakthrough experiments confirmed that TAMC has adequate adsorption kinetics to separate ethyl acetate from azeotropic mixtures with ethanol, which is a challenging and energy-intensive industrial separation.     

A Flexible Photoactive Titanium Metal–Organic Framework Based on a [TiIV3(μ3‐O)(O)2(COO)6] Cluster

The synthesis of titanium–carboxylate metal–organic frameworks (MOFs) is hampered by the high reactivity of the commonly employed alkoxide precursors. Herein, we present an innovative approach to titanium‐based MOFs by the use of titanocene dichloride to synthesize COK‐69, the first breathing Ti MOF, which is built up from trans‐1,4‐cyclohexanedicarboxylate linkers and an unprecedented [Ti^IV₃(μ₃‐O)(O)₂(COO)₆] cluster. The photoactive properties of COK‐69 were investigated in depth by proton‐coupled electron‐transfer experiments, which revealed that up to one Ti^IV center per cluster can be photoreduced to Ti^III while preserving the structural integrity of the framework. The electronic structure of COK‐69 was determined by molecular modeling, and a band gap of 3.77 eV was found.