Comparative study on the thermal behavior of structural concretes of sodium-cooled fast reactor

Journal of Thermal Analysis and Calorimetry - Thermal behaviors of two different siliceous concretes used in a sodium-cooled fast reactor were comparatively investigated in a temperature range from...     

Upper Limit of Nitrogen Content in Carbon Materials

Nitrogen‐doped carbon materials (NDCs) play an important role in various fields. A great deal of effort has been devoted to obtaining carbon materials with a high nitrogen content; however, much is still unknown about the structure of the nitrogen‐doped materials and the maximum nitrogen content possible for such compounds. Here, we demonstrate an interesting relationship between the N/C molar ratio and the N content of NDCs. The upper limit for the nitrogen content of NDCs that might be achieved was estimated and found to strongly depend on the carbonization temperature (14.32 wt % at 1000 °C and 21.66 wt % at 900 °C), irrespective of the precursor or preparation conditions. Simulations suggest that, especially in the carbon architectures obtained at high temperatures, nitrogen atoms are always located on separate hexagon moieties in a graphitic configuration, thereby yielding a critical N/C molar ratio very close to the value estimated from the experimental results.     

Water stability of cobalt doped ZIF-8: a quantitative study using optical analyses

Zeolitic imidazolate frameworks (ZIFs), in particular ZIF-8 (made of Zn²⁺ and 2-methyilimidazolate) and cobalt-doped-ZIF-8, are found important for many energy and environmental applications. It was reported that ZIFs show excellent structural stability in water and thus ideal for aqueous applications. However, recent studies also found some evidence that ZIF-8 undergoes hydrolysis in water. Despite the importance of ZIF's stability in many aqueous applications, the extent of ZIFs' degradation in water is still not yet fully understood. In this study, we report a quantitative study of the water stability of 0–100 at% cobalt-doped ZIF-8, using a new combination of analytical tools. The study demonstrated the importance of analyzing both filtered powders and the filtrate liquid systematically, in particular by using UV–Vis spectroscopy and thermogravimetric analysis. The combination of analytical tools allowed the study on the effects of ZIF concentrations in water, cobalt doping levels, and amounts of ligands in water on the water stability of ZIF samples. The effect of cobalt-doping was investigated by using ZIF particles with identical sizes (200–400 nm), in order to eliminate the effects of particle size on hydrolysis. Unlike other synthesis methods, a mechanochemical ball milling method allowed the production of nano-scale ZIF-8 particles with similar sizes, independent of cobalt-doping levels. The proposed combination of analytical tools including UV–Vis spectroscopy can be applied to the study of the water stability of other MOF materials.     

Acid-induced conformational alteration of cis-preferential aromatic amides bearing N-methyl-N-(2-pyridyl) moiety

A series of cis-preferential aromatic N-methyl amides was designed and synthesized, and acid-induced conformational alteration of these compounds was investigated by means of NMR measurements in solution and X-ray crystal structure analysis. Compounds with a terminal N-methyl-N-(2-pyridyl) amide unit showed acid-induced conformational change from cis to trans, while those with a terminal N-methyl-2-pyridinecarboxamide unit showed a change of the carbonyl orientation from anti to syn with retention of cis conformation.     

Fabrication of carbon nanofiber by pyrolysis of freeze-dried cellulose nanofiber

The possibility of fabricating carbon nanofibers from cellulose nanofibers was investigated. Cellulose nanofiber of ~50 nm in diameter was produced using ball milling in an eco-friendly manner. The effect of the drying techniques of cellulose nanofibers on the morphology of carbon residue was studied. After pyrolysis of freeze-dried cellulose nanofibers below 600 °C, amorphous carbon fibers of ~20 nm in diameter were obtained. The pyrolysis of oven-dried precursors resulted in the loss of original fibrous structures. The different results arising from the two drying techniques are attributed to the difference in the spatial distance between cellulose nanofiber precursors.     

Strong,Self-Healable,and Recyclable Visible-Light-Responsive Hydrogel Actuators

The most pressing challenges for light-driven hydrogel actuators include reliance on UV light, slow response, poor mechanical properties, and limited functionalities. Now, a supramolecular design strategy is used to address these issues. Key is the use of a benzylimine-functionalized anthracene group, which red-shifts the absorption into the visible region and also stabilizes the supramolecular network through π–π interactions. Acid–ether hydrogen bonds are incorporated for energy dissipation under mechanical deformation and maintaining hydrophilicity of the network. This double-crosslinked supramolecular hydrogel developed via a simple synthesis exhibits a unique combination of high strength, rapid self-healing, and fast visible-light-driven shape morphing both in the wet and dry state. As all of the interactions are dynamic, the design enables the structures to be recycled and reprogrammed into different 3D objects.     

Mesoporous Silica Particles as Topologically Crosslinking Fillers for Poly(N‐isopropylacrylamide) Hydrogels

Here it is demonstrated that mesoporous silicas (MPSs) can be used as effective “topological crosslinkers” for poly(N‐isopropylacrylamide) (PNIPA) hydrogels to improve the mechanical property. Three‐dimensional bicontinuous mesporous silica is found to effectively reinforce the PNIPA hydrogels, as compared to nonporous silica and two‐dimensional hexagonally ordered mesoporous silica.     

Comparison of total fluorine, extractable organic fluorine and perfluorinated compounds in the blood of wild and pefluorooctanoate (PFOA)-exposed rats: Evidence for the presence of other organofluorine compounds

The widespread occurrence and environmental persistence of perfluorinated compounds (PFCs) received worldwide attention recently. Exhaustive analysis of all fluorinated compounds in an environmental sample can be daunting because of the constraints in the availability of analytical standards and extraction methods. Combustion ion chromatographic technique for trace fluorine analysis was used to assess the concentrations of known PFCs (e.g., PFOS, PFOA) and total fluorine (TF) in the blood of wild rats collected from Japan. The technique was further validated using tissues from PFOA-exposed rats. Six PFCs (PFOS, PFOSA, PFUnDA, PFDA, PFNA, and PFOA) were detected in all of the wild rat blood samples. Concentrations of extractable organic fluorine (EOF) in fraction 1 (Fr1; MTBE extraction) of wild rats ranged 60.9-134 ng F mL⁻¹, while those in fraction 2 (Fr2; hexane) were below LOQ (32 ng F mL⁻¹); TF concentrations in the blood of wild rats ranged from 59.9-192 ng F mL⁻¹. The contribution of known PFCs in EOF-Fr1 (MTBE) varied from 9% to 89% (56% on average), and known PFC concentrations in TF content were less than 25%. In contrast, TF concentrations in the blood of PFOA-exposed rats ranged from 46900 to 111000 ng F mL⁻¹, with PFOA contributing over 90% of TF. A comparison of results from the samples analyzed in this study and the literature revealed three distinct groups with PFOA/known PFC and TF levels (i.e., wild rats and general population, occupationally exposed workers, and PFOA-exposed laboratory rats). The mass balance analysis of the different forms of fluorine in blood suggested the presence of other forms of organic fluorine in addition to known PFCs.